Windows Server 2016 Security Technical Implementation Guide

Requirements Catalog

Table of Requirements

STIG ID	Group ID	Rule ID	Requirement	Severity
WN16-00-000010	V-73217	SV-87869r1_rule	Users with Administrative privileges must have separate accounts for administrative duties and normal operational tasks.	CAT I
WN16-00-000030	V-73223	SV-87875r2_rule	Passwords for the built-in Administrator account must be changed at least every 60 days.	CAT II
WN16-00-000040	V-73225	SV-87877r1_rule	Administrative accounts must not be used with applications that access the Internet, such as web browsers, or with potential Internet sources, such as email.	CAT I
WN16-00-000050	V-73227	SV-87879r1_rule	Members of the Backup Operators group must have separate accounts for backup duties and normal operational tasks.	CAT II
WN16-00-000060	V-73229	SV-87881r1_rule	Manually managed application account passwords must be at least 15 characters in length.	CAT II
WN16-00-000070	V-73231	SV-87883r2_rule	Manually managed application account passwords must be changed at least annually or when a system administrator with knowledge of the password leaves the organization.	CAT II
WN16-00-000080	V-73233	SV-87885r2_rule	Shared user accounts must not be permitted on the system.	CAT II
WN16-00-000090	V-73235	SV-87887r2_rule	Windows Server 2016 must employ a deny-all, permit-by-exception policy to allow the execution of authorized software programs.	CAT II
WN16-00-000100	V-73237	SV-87889r2_rule	Windows Server 2016 domain-joined systems must have a Trusted Platform Module (TPM) enabled and ready for use.	CAT II
WN16-00-000110	V-73239	SV-87891r1_rule	Systems must be maintained at a supported servicing level.	CAT I
WN16-00-000120	V-73241	SV-87893r2_rule	The Windows Server 2016 system must use an anti-virus program.	CAT I
WN16-00-000140	V-73245	SV-87897r1_rule	Servers must have a host-based intrusion detection or prevention system.	CAT II
WN16-00-000150	V-73247	SV-87899r1_rule	Local volumes must use a format that supports NTFS attributes.	CAT I
WN16-00-000160	V-73249	SV-87901r1_rule	Permissions for the system drive root directory (usually C:\) must conform to minimum requirements.	CAT II
WN16-00-000170	V-73251	SV-87903r1_rule	Permissions for program file directories must conform to minimum requirements.	CAT II
WN16-00-000180	V-73253	SV-87905r1_rule	Permissions for the Windows installation directory must conform to minimum requirements.	CAT II
WN16-00-000190	V-73255	SV-87907r1_rule	Default permissions for the HKEY_LOCAL_MACHINE registry hive must be maintained.	CAT II
WN16-00-000200	V-73257	SV-87909r1_rule	Non-administrative accounts or groups must only have print permissions on printer shares.	CAT III
WN16-00-000210	V-73259	SV-87911r3_rule	Outdated or unused accounts must be removed from the system or disabled.	CAT II
WN16-00-000220	V-73261	SV-87913r4_rule	Windows Server 2016 accounts must require passwords.	CAT II
WN16-00-000230	V-73263	SV-87915r2_rule	Passwords must be configured to expire.	CAT II
WN16-00-000240	V-73265	SV-87917r1_rule	System files must be monitored for unauthorized changes.	CAT II
WN16-00-000250	V-73267	SV-87919r1_rule	Non-system-created file shares on a system must limit access to groups that require it.	CAT II
WN16-00-000270	V-73271	SV-87923r2_rule	Software certificate installation files must be removed from Windows Server 2016.	CAT II
WN16-00-000280	V-73273	SV-87925r1_rule	Systems requiring data at rest protections must employ cryptographic mechanisms to prevent unauthorized disclosure and modification of the information at rest.	CAT II
WN16-00-000290	V-73275	SV-87927r1_rule	Protection methods such as TLS, encrypted VPNs, or IPsec must be implemented if the data owner has a strict requirement for ensuring data integrity and confidentiality is maintained at every step of the data transfer and handling process.	CAT II
WN16-00-000300	V-73277	SV-87929r1_rule	The roles and features required by the system must be documented.	CAT II
WN16-00-000310	V-73279	SV-87931r1_rule	A host-based firewall must be installed and enabled on the system.	CAT II
WN16-00-000320	V-73281	SV-87933r2_rule	Windows Server 2016 must employ automated mechanisms to determine the state of system components with regard to flaw remediation using the following frequency: continuously, where Host Based Security System (HBSS) is used; 30 days, for any additional internal network scans not covered by HBSS; and annually, for external scans by Computer Network Defense Service Provider (CNDSP).	CAT II
WN16-00-000330	V-73283	SV-87935r1_rule	Windows Server 2016 must automatically remove or disable temporary user accounts after 72 hours.	CAT II
WN16-00-000340	V-73285	SV-87937r1_rule	Windows Server 2016 must automatically remove or disable emergency accounts after the crisis is resolved or within 72 hours.	CAT II
WN16-00-000350	V-73287	SV-87939r1_rule	The Fax Server role must not be installed.	CAT II
WN16-00-000360	V-73289	SV-87941r1_rule	The Microsoft FTP service must not be installed unless required.	CAT II
WN16-00-000370	V-73291	SV-87943r1_rule	The Peer Name Resolution Protocol must not be installed.	CAT II
WN16-00-000380	V-73293	SV-87945r1_rule	Simple TCP/IP Services must not be installed.	CAT II
WN16-00-000390	V-73295	SV-87947r1_rule	The Telnet Client must not be installed.	CAT II
WN16-00-000400	V-73297	SV-87949r1_rule	The TFTP Client must not be installed.	CAT II
WN16-00-000410	V-73299	SV-87951r2_rule	The Server Message Block (SMB) v1 protocol must be uninstalled.	CAT II
WN16-00-000411	V-78123	SV-92829r1_rule	The Server Message Block (SMB) v1 protocol must be disabled on the SMB server.	CAT II
WN16-00-000412	V-78125	SV-92831r1_rule	The Server Message Block (SMB) v1 protocol must be disabled on the SMB client.	CAT II
WN16-00-000420	V-73301	SV-87953r1_rule	Windows PowerShell 2.0 must not be installed.	CAT II
WN16-00-000430	V-73303	SV-87955r1_rule	FTP servers must be configured to prevent anonymous logons.	CAT II
WN16-00-000440	V-73305	SV-87957r1_rule	FTP servers must be configured to prevent access to the system drive.	CAT II
WN16-00-000450	V-73307	SV-87959r1_rule	The time service must synchronize with an appropriate DoD time source.	CAT III
WN16-00-000460	V-78127	SV-92833r2_rule	Orphaned security identifiers (SIDs) must be removed from user rights on Windows 2016.	CAT II
WN16-00-000470	V-90355	SV-101005r2_rule	Secure Boot must be enabled on Windows Server 2016 systems.	CAT III
WN16-00-000480	V-90357	SV-101007r2_rule	Windows 2016 systems must have Unified Extensible Firmware Interface (UEFI) firmware and be configured to run in UEFI mode, not Legacy BIOS.	CAT III
WN16-AC-000010	V-73309	SV-87961r3_rule	Windows 2016 account lockout duration must be configured to 15 minutes or greater.	CAT II
WN16-AC-000020	V-73311	SV-87963r2_rule	Windows Server 2016 must have the number of allowed bad logon attempts configured to three or less.	CAT II
WN16-AC-000030	V-73313	SV-87965r2_rule	Windows Server 2016 must have the period of time before the bad logon counter is reset configured to 15 minutes or greater.	CAT II
WN16-AC-000040	V-73315	SV-87967r2_rule	Windows Server 2016 password history must be configured to 24 passwords remembered.	CAT II
WN16-AC-000050	V-73317	SV-87969r2_rule	Windows Server 2016 maximum password age must be configured to 60 days or less.	CAT II
WN16-AC-000060	V-73319	SV-87971r2_rule	Windows Server 2016 minimum password age must be configured to at least one day.	CAT II
WN16-AC-000070	V-73321	SV-87973r2_rule	Windows Server 2016 minimum password length must be configured to 14 characters.	CAT II
WN16-AC-000080	V-73323	SV-87975r2_rule	Windows Server 2016 must have the built-in Windows password complexity policy enabled.	CAT II
WN16-AC-000090	V-73325	SV-87977r2_rule	Windows Server 2016 reversible password encryption must be disabled.	CAT I
WN16-AU-000010	V-73401	SV-88053r1_rule	Audit records must be backed up to a different system or media than the system being audited.	CAT II
WN16-AU-000020	V-73403	SV-88055r1_rule	Windows Server 2016 must, at a minimum, off-load audit records of interconnected systems in real time and off-load standalone systems weekly.	CAT II
WN16-AU-000030	V-73405	SV-88057r1_rule	Permissions for the Application event log must prevent access by non-privileged accounts.	CAT II
WN16-AU-000040	V-73407	SV-88059r1_rule	Permissions for the Security event log must prevent access by non-privileged accounts.	CAT II
WN16-AU-000050	V-73409	SV-88061r1_rule	Permissions for the System event log must prevent access by non-privileged accounts.	CAT II
WN16-AU-000060	V-73411	SV-88063r1_rule	Event Viewer must be protected from unauthorized modification and deletion.	CAT II
WN16-AU-000070	V-73413	SV-88065r1_rule	Windows Server 2016 must be configured to audit Account Logon - Credential Validation successes.	CAT II
WN16-AU-000080	V-73415	SV-88067r1_rule	Windows Server 2016 must be configured to audit Account Logon - Credential Validation failures.	CAT II
WN16-AU-000100	V-73419	SV-88071r1_rule	Windows Server 2016 must be configured to audit Account Management - Other Account Management Events successes.	CAT II
WN16-AU-000120	V-73423	SV-88075r1_rule	Windows Server 2016 must be configured to audit Account Management - Security Group Management successes.	CAT II
WN16-AU-000140	V-73427	SV-88079r1_rule	Windows Server 2016 must be configured to audit Account Management - User Account Management successes.	CAT II
WN16-AU-000150	V-73429	SV-88081r1_rule	Windows Server 2016 must be configured to audit Account Management - User Account Management failures.	CAT II
WN16-AU-000160	V-73431	SV-88083r2_rule	Windows Server 2016 must be configured to audit Detailed Tracking - Plug and Play Events successes.	CAT II
WN16-AU-000170	V-73433	SV-88085r1_rule	Windows Server 2016 must be configured to audit Detailed Tracking - Process Creation successes.	CAT II
WN16-AU-000220	V-73443	SV-88095r3_rule	Windows Server 2016 must be configured to audit Logon/Logoff - Account Lockout successes.	CAT II
WN16-AU-000230	V-73445	SV-88097r3_rule	Windows Server 2016 must be configured to audit Logon/Logoff - Account Lockout failures.	CAT II
WN16-AU-000240	V-73447	SV-88099r2_rule	Windows Server 2016 must be configured to audit Logon/Logoff - Group Membership successes.	CAT II
WN16-AU-000250	V-73449	SV-88101r1_rule	Windows Server 2016 must be configured to audit Logon/Logoff - Logoff successes.	CAT II
WN16-AU-000260	V-73451	SV-88103r1_rule	Windows Server 2016 must be configured to audit Logon/Logoff - Logon successes.	CAT II
WN16-AU-000270	V-73453	SV-88105r1_rule	Windows Server 2016 must be configured to audit Logon/Logoff - Logon failures.	CAT II
WN16-AU-000280	V-73455	SV-88107r1_rule	Windows Server 2016 must be configured to audit Logon/Logoff - Special Logon successes.	CAT II
WN16-AU-000285	V-90359	SV-101009r1_rule	Windows 2016 must be configured to audit Object Access - Other Object Access Events successes.	CAT II
WN16-AU-000286	V-90361	SV-101011r1_rule	Windows 2016 must be configured to audit Object Access - Other Object Access Events failures.	CAT II
WN16-AU-000290	V-73457	SV-88109r1_rule	Windows Server 2016 must be configured to audit Object Access - Removable Storage successes.	CAT II
WN16-AU-000300	V-73459	SV-88111r1_rule	Windows Server 2016 must be configured to audit Object Access - Removable Storage failures.	CAT II
WN16-AU-000310	V-73461	SV-88113r1_rule	Windows Server 2016 must be configured to audit Policy Change - Audit Policy Change successes.	CAT II
WN16-AU-000320	V-73463	SV-88115r1_rule	Windows Server 2016 must be configured to audit Policy Change - Audit Policy Change failures.	CAT II
WN16-AU-000330	V-73465	SV-88117r1_rule	Windows Server 2016 must be configured to audit Policy Change - Authentication Policy Change successes.	CAT II
WN16-AU-000340	V-73467	SV-88119r1_rule	Windows Server 2016 must be configured to audit Policy Change - Authorization Policy Change successes.	CAT II
WN16-AU-000350	V-73469	SV-88121r1_rule	Windows Server 2016 must be configured to audit Privilege Use - Sensitive Privilege Use successes.	CAT II
WN16-AU-000360	V-73471	SV-88123r1_rule	Windows Server 2016 must be configured to audit Privilege Use - Sensitive Privilege Use failures.	CAT II
WN16-AU-000370	V-73473	SV-88125r1_rule	Windows Server 2016 must be configured to audit System - IPsec Driver successes.	CAT II
WN16-AU-000380	V-73475	SV-88127r1_rule	Windows Server 2016 must be configured to audit System - IPsec Driver failures.	CAT II
WN16-AU-000390	V-73477	SV-88129r3_rule	Windows Server 2016 must be configured to audit System - Other System Events successes.	CAT II
WN16-AU-000400	V-73479	SV-88131r3_rule	Windows Server 2016 must be configured to audit System - Other System Events failures.	CAT II
WN16-AU-000410	V-73481	SV-88133r1_rule	Windows Server 2016 must be configured to audit System - Security State Change successes.	CAT II
WN16-AU-000420	V-73483	SV-88135r1_rule	Windows Server 2016 must be configured to audit System - Security System Extension successes.	CAT II
WN16-AU-000440	V-73489	SV-88141r1_rule	Windows Server 2016 must be configured to audit System - System Integrity successes.	CAT II
WN16-AU-000450	V-73491	SV-88143r1_rule	Windows Server 2016 must be configured to audit System - System Integrity failures.	CAT II
WN16-CC-000010	V-73493	SV-88145r1_rule	The display of slide shows on the lock screen must be disabled.	CAT II
WN16-CC-000030	V-73497	SV-88149r2_rule	WDigest Authentication must be disabled on Windows Server 2016.	CAT II
WN16-CC-000040	V-73499	SV-88151r1_rule	Internet Protocol version 6 (IPv6) source routing must be configured to the highest protection level to prevent IP source routing.	CAT III
WN16-CC-000050	V-73501	SV-88153r1_rule	Source routing must be configured to the highest protection level to prevent Internet Protocol (IP) source routing.	CAT III
WN16-CC-000060	V-73503	SV-88155r1_rule	Windows Server 2016 must be configured to prevent Internet Control Message Protocol (ICMP) redirects from overriding Open Shortest Path First (OSPF)-generated routes.	CAT III
WN16-CC-000070	V-73505	SV-88157r1_rule	Windows Server 2016 must be configured to ignore NetBIOS name release requests except from WINS servers.	CAT III
WN16-CC-000080	V-73507	SV-88159r1_rule	Insecure logons to an SMB server must be disabled.	CAT II
WN16-CC-000090	V-73509	SV-88161r1_rule	Hardened UNC paths must be defined to require mutual authentication and integrity for at least the \\*\SYSVOL and \\*\NETLOGON shares.	CAT II
WN16-CC-000100	V-73511	SV-88163r1_rule	Command line data must be included in process creation events.	CAT II
WN16-CC-000110	V-73513	SV-88165r2_rule	Windows Server 2016 virtualization-based security must be enabled with the platform security level configured to Secure Boot or Secure Boot with DMA Protection.	CAT II
WN16-CC-000140	V-73521	SV-88173r1_rule	Early Launch Antimalware, Boot-Start Driver Initialization Policy must prevent boot drivers identified as bad.	CAT II
WN16-CC-000150	V-73525	SV-88177r1_rule	Group Policy objects must be reprocessed even if they have not changed.	CAT II
WN16-CC-000160	V-73527	SV-88179r1_rule	Downloading print driver packages over HTTP must be prevented.	CAT II
WN16-CC-000170	V-73529	SV-88181r1_rule	Printing over HTTP must be prevented.	CAT II
WN16-CC-000180	V-73531	SV-88185r1_rule	The network selection user interface (UI) must not be displayed on the logon screen.	CAT II
WN16-CC-000210	V-73537	SV-88197r1_rule	Users must be prompted to authenticate when the system wakes from sleep (on battery).	CAT II
WN16-CC-000220	V-73539	SV-88201r1_rule	Users must be prompted to authenticate when the system wakes from sleep (plugged in).	CAT II
WN16-CC-000240	V-73543	SV-88207r1_rule	The Application Compatibility Program Inventory must be prevented from collecting data and sending the information to Microsoft.	CAT III
WN16-CC-000250	V-73545	SV-88209r1_rule	AutoPlay must be turned off for non-volume devices.	CAT I
WN16-CC-000260	V-73547	SV-88211r1_rule	The default AutoRun behavior must be configured to prevent AutoRun commands.	CAT I
WN16-CC-000270	V-73549	SV-88213r1_rule	AutoPlay must be disabled for all drives.	CAT I
WN16-CC-000280	V-73487	SV-88139r1_rule	Administrator accounts must not be enumerated during elevation.	CAT II
WN16-CC-000290	V-73551	SV-88215r1_rule	Windows Telemetry must be configured to Security or Basic.	CAT II
WN16-CC-000300	V-73553	SV-88217r1_rule	The Application event log size must be configured to 32768 KB or greater.	CAT II
WN16-CC-000310	V-73555	SV-88219r1_rule	The Security event log size must be configured to 196608 KB or greater.	CAT II
WN16-CC-000320	V-73557	SV-88221r1_rule	The System event log size must be configured to 32768 KB or greater.	CAT II
WN16-CC-000330	V-73559	SV-88223r2_rule	Windows Server 2016 Windows SmartScreen must be enabled.	CAT II
WN16-CC-000340	V-73561	SV-88225r1_rule	Explorer Data Execution Prevention must be enabled.	CAT II
WN16-CC-000350	V-73563	SV-88227r1_rule	Turning off File Explorer heap termination on corruption must be disabled.	CAT III
WN16-CC-000360	V-73565	SV-88229r1_rule	File Explorer shell protocol must run in protected mode.	CAT II
WN16-CC-000370	V-73567	SV-88231r1_rule	Passwords must not be saved in the Remote Desktop Client.	CAT II
WN16-CC-000380	V-73569	SV-88233r1_rule	Local drives must be prevented from sharing with Remote Desktop Session Hosts.	CAT II
WN16-CC-000390	V-73571	SV-88235r1_rule	Remote Desktop Services must always prompt a client for passwords upon connection.	CAT II
WN16-CC-000400	V-73573	SV-88237r1_rule	The Remote Desktop Session Host must require secure Remote Procedure Call (RPC) communications.	CAT II
WN16-CC-000410	V-73575	SV-88239r1_rule	Remote Desktop Services must be configured with the client connection encryption set to High Level.	CAT II
WN16-CC-000420	V-73577	SV-88241r1_rule	Attachments must be prevented from being downloaded from RSS feeds.	CAT II
WN16-CC-000421	V-102623	SV-111573r1_rule	The Windows Explorer Preview pane must be disabled for Windows Server 2016.	CAT II
WN16-CC-000430	V-73579	SV-88243r1_rule	Basic authentication for RSS feeds over HTTP must not be used.	CAT II
WN16-CC-000440	V-73581	SV-88245r1_rule	Indexing of encrypted files must be turned off.	CAT II
WN16-CC-000450	V-73583	SV-88247r1_rule	Users must be prevented from changing installation options.	CAT II
WN16-CC-000460	V-73585	SV-88249r1_rule	The Windows Installer Always install with elevated privileges option must be disabled.	CAT I
WN16-CC-000470	V-73587	SV-88251r1_rule	Users must be notified if a web-based program attempts to install software.	CAT II
WN16-CC-000480	V-73589	SV-88253r1_rule	Automatically signing in the last interactive user after a system-initiated restart must be disabled.	CAT II
WN16-CC-000490	V-73591	SV-88255r1_rule	PowerShell script block logging must be enabled.	CAT II
WN16-CC-000500	V-73593	SV-88257r1_rule	The Windows Remote Management (WinRM) client must not use Basic authentication.	CAT I
WN16-CC-000510	V-73595	SV-88259r1_rule	The Windows Remote Management (WinRM) client must not allow unencrypted traffic.	CAT II
WN16-CC-000520	V-73597	SV-88261r1_rule	The Windows Remote Management (WinRM) client must not use Digest authentication.	CAT II
WN16-CC-000530	V-73599	SV-88263r1_rule	The Windows Remote Management (WinRM) service must not use Basic authentication.	CAT I
WN16-CC-000540	V-73601	SV-88265r1_rule	The Windows Remote Management (WinRM) service must not allow unencrypted traffic.	CAT II
WN16-CC-000550	V-73603	SV-88267r1_rule	The Windows Remote Management (WinRM) service must not store RunAs credentials.	CAT II
WN16-DC-000010	V-73219	SV-87871r1_rule	Only administrators responsible for the domain controller must have Administrator rights on the system.	CAT I
WN16-DC-000020	V-73359	SV-88011r1_rule	Kerberos user logon restrictions must be enforced.	CAT II
WN16-DC-000030	V-73361	SV-88013r1_rule	The Kerberos service ticket maximum lifetime must be limited to 600 minutes or less.	CAT II
WN16-DC-000040	V-73363	SV-88015r1_rule	The Kerberos user ticket lifetime must be limited to 10 hours or less.	CAT II
WN16-DC-000050	V-73365	SV-88017r1_rule	The Kerberos policy user ticket renewal maximum lifetime must be limited to seven days or less.	CAT II
WN16-DC-000060	V-73367	SV-88019r1_rule	The computer clock synchronization tolerance must be limited to 5 minutes or less.	CAT II
WN16-DC-000070	V-73369	SV-88021r1_rule	Permissions on the Active Directory data files must only allow System and Administrators access.	CAT I
WN16-DC-000080	V-73371	SV-88023r1_rule	The Active Directory SYSVOL directory must have the proper access control permissions.	CAT I
WN16-DC-000090	V-73373	SV-88025r1_rule	Active Directory Group Policy objects must have proper access control permissions.	CAT I
WN16-DC-000100	V-73375	SV-88027r2_rule	The Active Directory Domain Controllers Organizational Unit (OU) object must have the proper access control permissions.	CAT I
WN16-DC-000110	V-73377	SV-88029r1_rule	Domain-created Active Directory Organizational Unit (OU) objects must have proper access control permissions.	CAT I
WN16-DC-000120	V-73379	SV-88031r1_rule	Data files owned by users must be on a different logical partition from the directory server data files.	CAT II
WN16-DC-000130	V-73381	SV-88033r1_rule	Domain controllers must run on a machine dedicated to that function.	CAT II
WN16-DC-000140	V-73383	SV-88035r1_rule	Separate, NSA-approved (Type 1) cryptography must be used to protect the directory data in transit for directory service implementations at a classified confidentiality level when replication data traverses a network cleared to a lower level than the data.	CAT II
WN16-DC-000150	V-73385	SV-88037r1_rule	Directory data (outside the root DSE) of a non-public directory must be configured to prevent anonymous access.	CAT I
WN16-DC-000160	V-73387	SV-88039r1_rule	The directory service must be configured to terminate LDAP-based network connections to the directory server after 5 minutes of inactivity.	CAT III
WN16-DC-000170	V-73389	SV-88041r2_rule	Active Directory Group Policy objects must be configured with proper audit settings.	CAT II
WN16-DC-000180	V-73391	SV-88043r1_rule	The Active Directory Domain object must be configured with proper audit settings.	CAT II
WN16-DC-000190	V-73393	SV-88045r1_rule	The Active Directory Infrastructure object must be configured with proper audit settings.	CAT II
WN16-DC-000200	V-73395	SV-88047r1_rule	The Active Directory Domain Controllers Organizational Unit (OU) object must be configured with proper audit settings.	CAT II
WN16-DC-000210	V-73397	SV-88049r1_rule	The Active Directory AdminSDHolder object must be configured with proper audit settings.	CAT II
WN16-DC-000220	V-73399	SV-88051r1_rule	The Active Directory RID Manager$ object must be configured with proper audit settings.	CAT II
WN16-DC-000230	V-73417	SV-88069r1_rule	Windows Server 2016 must be configured to audit Account Management - Computer Account Management successes.	CAT II
WN16-DC-000240	V-73435	SV-88087r1_rule	Windows Server 2016 must be configured to audit DS Access - Directory Service Access successes.	CAT II
WN16-DC-000250	V-73437	SV-88089r1_rule	Windows Server 2016 must be configured to audit DS Access - Directory Service Access failures.	CAT II
WN16-DC-000260	V-73439	SV-88091r1_rule	Windows Server 2016 must be configured to audit DS Access - Directory Service Changes successes.	CAT II
WN16-DC-000270	V-73441	SV-88093r1_rule	Windows Server 2016 must be configured to audit DS Access - Directory Service Changes failures.	CAT II
WN16-DC-000280	V-73611	SV-88275r1_rule	Domain controllers must have a PKI server certificate.	CAT II
WN16-DC-000290	V-73613	SV-88277r1_rule	Domain Controller PKI certificates must be issued by the DoD PKI or an approved External Certificate Authority (ECA).	CAT I
WN16-DC-000300	V-73615	SV-88279r2_rule	PKI certificates associated with user accounts must be issued by the DoD PKI or an approved External Certificate Authority (ECA).	CAT I
WN16-DC-000310	V-73617	SV-88281r1_rule	Active Directory user accounts, including administrators, must be configured to require the use of a Common Access Card (CAC), Personal Identity Verification (PIV)-compliant hardware token, or Alternate Logon Token (ALT) for user authentication.	CAT II
WN16-DC-000320	V-73629	SV-88293r1_rule	Domain controllers must require LDAP access signing.	CAT II
WN16-DC-000330	V-73631	SV-88295r1_rule	Domain controllers must be configured to allow reset of machine account passwords.	CAT II
WN16-DC-000340	V-73731	SV-88395r3_rule	The Access this computer from the network user right must only be assigned to the Administrators, Authenticated Users, and Enterprise Domain Controllers groups on domain controllers.	CAT II
WN16-DC-000350	V-73737	SV-88401r2_rule	The Add workstations to domain user right must only be assigned to the Administrators group.	CAT II
WN16-DC-000360	V-73741	SV-88405r2_rule	The Allow log on through Remote Desktop Services user right must only be assigned to the Administrators group.	CAT II
WN16-DC-000370	V-73757	SV-88421r2_rule	The Deny access to this computer from the network user right on domain controllers must be configured to prevent unauthenticated access.	CAT II
WN16-DC-000380	V-73761	SV-88425r2_rule	The Deny log on as a batch job user right on domain controllers must be configured to prevent unauthenticated access.	CAT II
WN16-DC-000390	V-73765	SV-88429r2_rule	The Deny log on as a service user right must be configured to include no accounts or groups (blank) on domain controllers.	CAT II
WN16-DC-000400	V-73769	SV-88433r2_rule	The Deny log on locally user right on domain controllers must be configured to prevent unauthenticated access.	CAT II
WN16-DC-000410	V-73773	SV-88437r2_rule	The Deny log on through Remote Desktop Services user right on domain controllers must be configured to prevent unauthenticated access.	CAT II
WN16-DC-000420	V-73777	SV-88441r2_rule	The Enable computer and user accounts to be trusted for delegation user right must only be assigned to the Administrators group on domain controllers.	CAT II
WN16-DC-000430	V-91779	SV-101881r2_rule	The password for the krbtgt account on a domain must be reset at least every 180 days.	CAT II
WN16-MS-000010	V-73221	SV-87873r2_rule	Only administrators responsible for the member server or standalone system must have Administrator rights on the system.	CAT I
WN16-MS-000020	V-73495	SV-88147r1_rule	Local administrator accounts must have their privileged token filtered to prevent elevated privileges from being used over the network on domain systems.	CAT II
WN16-MS-000030	V-73533	SV-88187r1_rule	Local users on domain-joined computers must not be enumerated.	CAT II
WN16-MS-000040	V-73541	SV-88203r1_rule	Unauthenticated Remote Procedure Call (RPC) clients must be restricted from connecting to the RPC server.	CAT II
WN16-MS-000050	V-73651	SV-88315r1_rule	Caching of logon credentials must be limited.	CAT II
WN16-MS-000120	V-73515	SV-88167r4_rule	Windows Server 2016 must be running Credential Guard on domain-joined member servers.	CAT I
WN16-MS-000310	V-73677	SV-88341r2_rule	Remote calls to the Security Account Manager (SAM) must be restricted to Administrators.	CAT II
WN16-MS-000340	V-73733	SV-88397r3_rule	The Access this computer from the network user right must only be assigned to the Administrators and Authenticated Users groups on member servers.	CAT II
WN16-MS-000370	V-73759	SV-88423r3_rule	The Deny access to this computer from the network user right on member servers must be configured to prevent access from highly privileged domain accounts and local accounts on domain systems, and from unauthenticated access on all systems.	CAT II
WN16-MS-000380	V-73763	SV-88427r2_rule	The Deny log on as a batch job user right on member servers must be configured to prevent access from highly privileged domain accounts on domain systems and from unauthenticated access on all systems.	CAT II
WN16-MS-000390	V-73767	SV-88431r2_rule	The Deny log on as a service user right on member servers must be configured to prevent access from highly privileged domain accounts on domain systems. No other groups or accounts must be assigned this right.	CAT II
WN16-MS-000400	V-73771	SV-88435r3_rule	The Deny log on locally user right on member servers must be configured to prevent access from highly privileged domain accounts on domain systems and from unauthenticated access on all systems.	CAT II
WN16-MS-000410	V-73775	SV-88439r3_rule	The Deny log on through Remote Desktop Services user right on member servers must be configured to prevent access from highly privileged domain accounts and all local accounts on domain systems and from unauthenticated access on all systems.	CAT II
WN16-MS-000420	V-73779	SV-88443r2_rule	The Enable computer and user accounts to be trusted for delegation user right must not be assigned to any groups or accounts on member servers.	CAT II
WN16-PK-000010	V-73605	SV-88269r3_rule	The DoD Root CA certificates must be installed in the Trusted Root Store.	CAT II
WN16-PK-000020	V-73607	SV-88271r3_rule	The DoD Interoperability Root CA cross-certificates must be installed in the Untrusted Certificates Store on unclassified systems.	CAT II
WN16-PK-000030	V-73609	SV-88273r3_rule	The US DoD CCEB Interoperability Root CA cross-certificates must be installed in the Untrusted Certificates Store on unclassified systems.	CAT II
WN16-SO-000010	V-73809	SV-88475r2_rule	Windows Server 2016 built-in guest account must be disabled.	CAT II
WN16-SO-000020	V-73621	SV-88285r1_rule	Local accounts with blank passwords must be restricted to prevent access from the network.	CAT I
WN16-SO-000030	V-73623	SV-88287r2_rule	Windows Server 2016 built-in administrator account must be renamed.	CAT II
WN16-SO-000040	V-73625	SV-88289r2_rule	Windows Server 2016 built-in guest account must be renamed.	CAT II
WN16-SO-000050	V-73627	SV-88291r1_rule	Audit policy using subcategories must be enabled.	CAT II
WN16-SO-000080	V-73633	SV-88297r1_rule	The setting Domain member: Digitally encrypt or sign secure channel data (always) must be configured to Enabled.	CAT II
WN16-SO-000090	V-73635	SV-88299r1_rule	The setting Domain member: Digitally encrypt secure channel data (when possible) must be configured to enabled.	CAT II
WN16-SO-000100	V-73637	SV-88301r1_rule	The setting Domain member: Digitally sign secure channel data (when possible) must be configured to Enabled.	CAT II
WN16-SO-000110	V-73639	SV-88303r1_rule	The computer account password must not be prevented from being reset.	CAT II
WN16-SO-000120	V-73641	SV-88305r1_rule	The maximum age for machine account passwords must be configured to 30 days or less.	CAT II
WN16-SO-000130	V-73643	SV-88307r1_rule	Windows Server 2016 must be configured to require a strong session key.	CAT II
WN16-SO-000140	V-73645	SV-88309r2_rule	The machine inactivity limit must be set to 15 minutes, locking the system with the screen saver.	CAT II
WN16-SO-000150	V-73647	SV-88311r2_rule	The required legal notice must be configured to display before console logon.	CAT II
WN16-SO-000160	V-73649	SV-88313r1_rule	The Windows dialog box title for the legal banner must be configured with the appropriate text.	CAT III
WN16-SO-000180	V-73807	SV-88473r1_rule	The Smart Card removal option must be configured to Force Logoff or Lock Workstation.	CAT II
WN16-SO-000190	V-73653	SV-88317r1_rule	The setting Microsoft network client: Digitally sign communications (always) must be configured to Enabled.	CAT II
WN16-SO-000200	V-73655	SV-88319r1_rule	The setting Microsoft network client: Digitally sign communications (if server agrees) must be configured to Enabled.	CAT II
WN16-SO-000210	V-73657	SV-88321r1_rule	Unencrypted passwords must not be sent to third-party Server Message Block (SMB) servers.	CAT II
WN16-SO-000230	V-73661	SV-88325r1_rule	The setting Microsoft network server: Digitally sign communications (always) must be configured to Enabled.	CAT II
WN16-SO-000240	V-73663	SV-88327r1_rule	The setting Microsoft network server: Digitally sign communications (if client agrees) must be configured to Enabled.	CAT II
WN16-SO-000250	V-73665	SV-88329r2_rule	Anonymous SID/Name translation must not be allowed.	CAT I
WN16-SO-000260	V-73667	SV-88331r1_rule	Anonymous enumeration of Security Account Manager (SAM) accounts must not be allowed.	CAT I
WN16-SO-000270	V-73669	SV-88333r1_rule	Anonymous enumeration of shares must not be allowed.	CAT I
WN16-SO-000290	V-73673	SV-88337r1_rule	Windows Server 2016 must be configured to prevent anonymous users from having the same permissions as the Everyone group.	CAT II
WN16-SO-000300	V-73675	SV-88339r1_rule	Anonymous access to Named Pipes and Shares must be restricted.	CAT I
WN16-SO-000320	V-73679	SV-88343r1_rule	Services using Local System that use Negotiate when reverting to NTLM authentication must use the computer identity instead of authenticating anonymously.	CAT II
WN16-SO-000330	V-73681	SV-88345r1_rule	NTLM must be prevented from falling back to a Null session.	CAT II
WN16-SO-000340	V-73683	SV-88347r1_rule	PKU2U authentication using online identities must be prevented.	CAT II
WN16-SO-000350	V-73685	SV-88349r2_rule	Kerberos encryption types must be configured to prevent the use of DES and RC4 encryption suites.	CAT II
WN16-SO-000360	V-73687	SV-88351r1_rule	Windows Server 2016 must be configured to prevent the storage of the LAN Manager hash of passwords.	CAT I
WN16-SO-000380	V-73691	SV-88355r1_rule	The LAN Manager authentication level must be set to send NTLMv2 response only and to refuse LM and NTLM.	CAT I
WN16-SO-000390	V-73693	SV-88357r1_rule	Windows Server 2016 must be configured to at least negotiate signing for LDAP client signing.	CAT II
WN16-SO-000400	V-73695	SV-88359r1_rule	Session security for NTLM SSP-based clients must be configured to require NTLMv2 session security and 128-bit encryption.	CAT II
WN16-SO-000410	V-73697	SV-88361r1_rule	Session security for NTLM SSP-based servers must be configured to require NTLMv2 session security and 128-bit encryption.	CAT II
WN16-SO-000420	V-73699	SV-88363r1_rule	Users must be required to enter a password to access private keys stored on the computer.	CAT II
WN16-SO-000430	V-73701	SV-88365r1_rule	Windows Server 2016 must be configured to use FIPS-compliant algorithms for encryption, hashing, and signing.	CAT II
WN16-SO-000450	V-73705	SV-88369r1_rule	The default permissions of global system objects must be strengthened.	CAT III
WN16-SO-000460	V-73707	SV-88371r1_rule	User Account Control approval mode for the built-in Administrator must be enabled.	CAT II
WN16-SO-000470	V-73709	SV-88373r1_rule	UIAccess applications must not be allowed to prompt for elevation without using the secure desktop.	CAT II
WN16-SO-000480	V-73711	SV-88375r1_rule	User Account Control must, at a minimum, prompt administrators for consent on the secure desktop.	CAT II
WN16-SO-000490	V-73713	SV-88377r1_rule	User Account Control must automatically deny standard user requests for elevation.	CAT II
WN16-SO-000500	V-73715	SV-88379r1_rule	User Account Control must be configured to detect application installations and prompt for elevation.	CAT II
WN16-SO-000510	V-73717	SV-88381r1_rule	User Account Control must only elevate UIAccess applications that are installed in secure locations.	CAT II
WN16-SO-000520	V-73719	SV-88383r1_rule	User Account Control must run all administrators in Admin Approval Mode, enabling UAC.	CAT II
WN16-SO-000530	V-73721	SV-88385r1_rule	User Account Control must virtualize file and registry write failures to per-user locations.	CAT II
WN16-UC-000030	V-73727	SV-88391r1_rule	Zone information must be preserved when saving attachments.	CAT II
WN16-UR-000010	V-73729	SV-88393r2_rule	The Access Credential Manager as a trusted caller user right must not be assigned to any groups or accounts.	CAT II
WN16-UR-000030	V-73735	SV-88399r2_rule	The Act as part of the operating system user right must not be assigned to any groups or accounts.	CAT I
WN16-UR-000050	V-73739	SV-88403r2_rule	The Allow log on locally user right must only be assigned to the Administrators group.	CAT II
WN16-UR-000070	V-73743	SV-88407r2_rule	The Back up files and directories user right must only be assigned to the Administrators group.	CAT II
WN16-UR-000080	V-73745	SV-88409r2_rule	The Create a pagefile user right must only be assigned to the Administrators group.	CAT II
WN16-UR-000090	V-73747	SV-88411r2_rule	The Create a token object user right must not be assigned to any groups or accounts.	CAT I
WN16-UR-000100	V-73749	SV-88413r2_rule	The Create global objects user right must only be assigned to Administrators, Service, Local Service, and Network Service.	CAT II
WN16-UR-000110	V-73751	SV-88415r2_rule	The Create permanent shared objects user right must not be assigned to any groups or accounts.	CAT II
WN16-UR-000120	V-73753	SV-88417r2_rule	The Create symbolic links user right must only be assigned to the Administrators group.	CAT II
WN16-UR-000130	V-73755	SV-88419r2_rule	The Debug programs user right must only be assigned to the Administrators group.	CAT I
WN16-UR-000200	V-73781	SV-88445r2_rule	The Force shutdown from a remote system user right must only be assigned to the Administrators group.	CAT II
WN16-UR-000210	V-73783	SV-88447r2_rule	The Generate security audits user right must only be assigned to Local Service and Network Service.	CAT II
WN16-UR-000220	V-73785	SV-88449r2_rule	The Impersonate a client after authentication user right must only be assigned to Administrators, Service, Local Service, and Network Service.	CAT II
WN16-UR-000230	V-73787	SV-88451r2_rule	The Increase scheduling priority user right must only be assigned to the Administrators group.	CAT II
WN16-UR-000240	V-73789	SV-88453r2_rule	The Load and unload device drivers user right must only be assigned to the Administrators group.	CAT II
WN16-UR-000250	V-73791	SV-88455r2_rule	The Lock pages in memory user right must not be assigned to any groups or accounts.	CAT II
WN16-UR-000260	V-73793	SV-88457r2_rule	The Manage auditing and security log user right must only be assigned to the Administrators group.	CAT II
WN16-UR-000270	V-73795	SV-88459r2_rule	The Modify firmware environment values user right must only be assigned to the Administrators group.	CAT II
WN16-UR-000280	V-73797	SV-88461r2_rule	The Perform volume maintenance tasks user right must only be assigned to the Administrators group.	CAT II
WN16-UR-000290	V-73799	SV-88463r2_rule	The Profile single process user right must only be assigned to the Administrators group.	CAT II
WN16-UR-000300	V-73801	SV-88465r2_rule	The Restore files and directories user right must only be assigned to the Administrators group.	CAT II
WN16-UR-000310	V-73803	SV-88467r2_rule	The Take ownership of files or other objects user right must only be assigned to the Administrators group.	CAT II

Requirement Details

STIG ID: WN16-00-000010

Group ID: V-73217

Rule ID: SV-87869r1_rule

Severity: CAT I

Requirement:	Users with Administrative privileges must have separate accounts for administrative duties and normal operational tasks.
Discussion:	Using a privileged account to perform routine functions makes the computer vulnerable to malicious software inadvertently introduced during a session that has been granted full privileges.
Check:	Verify each user with administrative privileges has been assigned a unique administrative account separate from their standard user account. If users with administrative privileges do not have separate accounts for administrative functions and standard user functions, this is a finding.
Fix:	Ensure each user with administrative privileges has a separate account for user duties and one for privileged duties.
References:	CCI-000366

STIG ID: WN16-00-000030

Group ID: V-73223

Rule ID: SV-87875r2_rule

Severity: CAT II

Requirement:	Passwords for the built-in Administrator account must be changed at least every 60 days.
Discussion:	The longer a password is in use, the greater the opportunity for someone to gain unauthorized knowledge of the password. The built-in Administrator account is not generally used and its password not may be changed as frequently as necessary. Changing the password for the built-in Administrator account on a regular basis will limit its exposure. Organizations that use an automated tool, such Microsoft's Local Administrator Password Solution (LAPS), on domain-joined systems can configure this to occur more frequently. LAPS will change the password every "30" days by default.
Check:	Review the password last set date for the built-in Administrator account. Domain controllers: Open "PowerShell". Enter "Get-ADUser -Filter * -Properties SID, PasswordLastSet | Where SID -Like "*-500" | Ft Name, SID, PasswordLastSet". If the "PasswordLastSet" date is greater than "60" days old, this is a finding. Member servers and standalone systems: Open "Command Prompt". Enter 'Net User [account name] | Find /i "Password Last Set"', where [account name] is the name of the built-in administrator account. (The name of the built-in Administrator account must be changed to something other than "Administrator" per STIG requirements.) If the "PasswordLastSet" date is greater than "60" days old, this is a finding.
Fix:	Change the built-in Administrator account password at least every "60" days. Automated tools, such as Microsoft's LAPS, may be used on domain-joined member servers to accomplish this.
References:	CCI-000199

STIG ID: WN16-00-000040

Group ID: V-73225

Rule ID: SV-87877r1_rule

Severity: CAT I

Requirement:	Administrative accounts must not be used with applications that access the Internet, such as web browsers, or with potential Internet sources, such as email.
Discussion:	Using applications that access the Internet or have potential Internet sources using administrative privileges exposes a system to compromise. If a flaw in an application is exploited while running as a privileged user, the entire system could be compromised. Web browsers and email are common attack vectors for introducing malicious code and must not be run with an administrative account. Since administrative accounts may generally change or work around technical restrictions for running a web browser or other applications, it is essential that policy require administrative accounts to not access the Internet or use applications such as email. The policy should define specific exceptions for local service administration. These exceptions may include HTTP(S)-based tools that are used for the administration of the local system, services, or attached devices. Whitelisting can be used to enforce the policy to ensure compliance.
Check:	Determine whether organization policy, at a minimum, prohibits administrative accounts from using applications that access the Internet, such as web browsers, or with potential Internet sources, such as email, except as necessary for local service administration. If it does not, this is a finding. The organization may use technical means such as whitelisting to prevent the use of browsers and mail applications to enforce this requirement.
Fix:	Establish a policy, at minimum, to prohibit administrative accounts from using applications that access the Internet, such as web browsers, or with potential Internet sources, such as email. Ensure the policy is enforced. The organization may use technical means such as whitelisting to prevent the use of browsers and mail applications to enforce this requirement.
References:	CCI-000366

STIG ID: WN16-00-000050

Group ID: V-73227

Rule ID: SV-87879r1_rule

Severity: CAT II

Requirement:	Members of the Backup Operators group must have separate accounts for backup duties and normal operational tasks.
Discussion:	Backup Operators are able to read and write to any file in the system, regardless of the rights assigned to it. Backup and restore rights permit users to circumvent the file access restrictions present on NTFS disk drives for backup and restore purposes. Members of the Backup Operators group must have separate logon accounts for performing backup duties.
Check:	If no accounts are members of the Backup Operators group, this is NA. Verify users with accounts in the Backup Operators group have a separate user account for backup functions and for performing normal user tasks. If users with accounts in the Backup Operators group do not have separate accounts for backup functions and standard user functions, this is a finding.
Fix:	Ensure each member of the Backup Operators group has separate accounts for backup functions and standard user functions.
References:	CCI-000366

STIG ID: WN16-00-000060

Group ID: V-73229

Rule ID: SV-87881r1_rule

Severity: CAT II

Requirement:	Manually managed application account passwords must be at least 15 characters in length.
Discussion:	Application/service account passwords must be of sufficient length to prevent being easily cracked. Application/service accounts that are manually managed must have passwords at least 15 characters in length.
Check:	Determine if manually managed application/service accounts exist. If none exist, this is NA. Verify the organization has a policy to ensure passwords for manually managed application/service accounts are at least 15 characters in length. If such a policy does not exist or has not been implemented, this is a finding.
Fix:	Establish a policy that requires application/service account passwords that are manually managed to be at least 15 characters in length. Ensure the policy is enforced.
References:	CCI-000205

STIG ID: WN16-00-000070

Group ID: V-73231

Rule ID: SV-87883r2_rule

Severity: CAT II

Requirement:	Manually managed application account passwords must be changed at least annually or when a system administrator with knowledge of the password leaves the organization.
Discussion:	Setting application account passwords to expire may cause applications to stop functioning. However, not changing them on a regular basis exposes them to attack. If managed service accounts are used, this alleviates the need to manually change application account passwords.
Check:	Determine if manually managed application/service accounts exist. If none exist, this is NA. If passwords for manually managed application/service accounts are not changed at least annually or when an administrator with knowledge of the password leaves the organization, this is a finding. Identify manually managed application/service accounts. To determine the date a password was last changed: Domain controllers: Open "PowerShell". Enter "Get-AdUser -Identity [application account name] -Properties PasswordLastSet | FT Name, PasswordLastSet", where [application account name] is the name of the manually managed application/service account. If the "PasswordLastSet" date is more than one year old, this is a finding. Member servers and standalone systems: Open "Command Prompt". Enter 'Net User [application account name] | Find /i "Password Last Set"', where [application account name] is the name of the manually managed application/service account. If the "Password Last Set" date is more than one year old, this is a finding.
Fix:	Change passwords for manually managed application/service accounts at least annually or when an administrator with knowledge of the password leaves the organization. It is recommended that system-managed service accounts be used whenever possible.
References:	CCI-000366

STIG ID: WN16-00-000080

Group ID: V-73233

Rule ID: SV-87885r2_rule

Severity: CAT II

Requirement:	Shared user accounts must not be permitted on the system.
Discussion:	Shared accounts (accounts where two or more people log on with the same user identification) do not provide adequate identification and authentication. There is no way to provide for nonrepudiation or individual accountability for system access and resource usage.
Check:	Determine whether any shared accounts exist. If no shared accounts exist, this is NA. Shared accounts, such as required by an application, may be approved by the organization. This must be documented with the ISSO. Documentation must include the reason for the account, who has access to the account, and how the risk of using the shared account is mitigated to include monitoring account activity. If unapproved shared accounts exist, this is a finding.
Fix:	Remove unapproved shared accounts from the system. Document required shared accounts with the ISSO. Documentation must include the reason for the account, who has access to the account, and how the risk of using the shared account is mitigated to include monitoring account activity.
References:	CCI-000764

STIG ID: WN16-00-000090

Group ID: V-73235

Rule ID: SV-87887r2_rule

Severity: CAT II

Requirement:	Windows Server 2016 must employ a deny-all, permit-by-exception policy to allow the execution of authorized software programs.
Discussion:	Using a whitelist provides a configuration management method to allow the execution of only authorized software. Using only authorized software decreases risk by limiting the number of potential vulnerabilities. The organization must identify authorized software programs and only permit execution of authorized software. The process used to identify software programs that are authorized to execute on organizational information systems is commonly referred to as whitelisting.
Check:	This is applicable to unclassified systems. For other systems, this is NA. Verify the operating system employs a deny-all, permit-by-exception policy to allow the execution of authorized software programs. If an application whitelisting program is not in use on the system, this is a finding. Configuration of whitelisting applications will vary by the program. AppLocker is a whitelisting application built into Windows Server. A deny-by-default implementation is initiated by enabling any AppLocker rules within a category, only allowing what is specified by defined rules. If AppLocker is used, perform the following to view the configuration of AppLocker: Open "PowerShell". If the AppLocker PowerShell module has not been imported previously, execute the following first: Import-Module AppLocker Execute the following command, substituting [c:\temp\file.xml] with a location and file name appropriate for the system: Get-AppLockerPolicy -Effective -XML > c:\temp\file.xml This will produce an xml file with the effective settings that can be viewed in a browser or opened in a program such as Excel for review. Implementation guidance for AppLocker is available in the NSA paper "Application Whitelisting using Microsoft AppLocker" at the following link: https://www.iad.gov/iad/library/ia-guidance/tech-briefs/application-whitelisting-using-microsoft-applocker.cfm
Fix:	Configure an application whitelisting program to employ a deny-all, permit-by-exception policy to allow the execution of authorized software programs. Configuration of whitelisting applications will vary by the program. AppLocker is a whitelisting application built into Windows Server. If AppLocker is used, it is configured through group policy in Computer Configuration >> Windows Settings >> Security Settings >> Application Control Policies >> AppLocker. Implementation guidance for AppLocker is available in the NSA paper "Application Whitelisting using Microsoft AppLocker" at the following link: https://www.iad.gov/iad/library/ia-guidance/tech-briefs/application-whitelisting-using-microsoft-applocker.cfm
References:	CCI-001774

STIG ID: WN16-00-000100

Group ID: V-73237

Rule ID: SV-87889r2_rule

Severity: CAT II

Requirement:	Windows Server 2016 domain-joined systems must have a Trusted Platform Module (TPM) enabled and ready for use.
Discussion:	Credential Guard uses virtualization-based security to protect data that could be used in credential theft attacks if compromised. A number of system requirements must be met in order for Credential Guard to be configured and enabled properly. Without a TPM enabled and ready for use, Credential Guard keys are stored in a less secure method using software.
Check:	For standalone systems, this is NA. Current hardware and virtual environments may not support virtualization-based security features, including Credential Guard, due to specific supporting requirements including a TPM, UEFI with Secure Boot, and the capability to run the Hyper-V feature within a virtual machine. Verify the system has a TPM and it is ready for use. Run "tpm.msc". Review the sections in the center pane. "Status" must indicate it has been configured with a message such as "The TPM is ready for use" or "The TPM is on and ownership has been taken". TPM Manufacturer Information - Specific Version = 2.0 or 1.2 If a TPM is not found or is not ready for use, this is a finding.
Fix:	Ensure domain-joined systems have a TPM that is configured for use. (Versions 2.0 or 1.2 support Credential Guard.) The TPM must be enabled in the firmware. Run "tpm.msc" for configuration options in Windows.
References:	CCI-000366

STIG ID: WN16-00-000110

Group ID: V-73239

Rule ID: SV-87891r1_rule

Severity: CAT I

Requirement:	Systems must be maintained at a supported servicing level.
Discussion:	Systems at unsupported servicing levels will not receive security updates for new vulnerabilities, which leave them subject to exploitation. Systems must be maintained at a servicing level supported by the vendor with new security updates.
Check:	Open "Command Prompt". Enter "winver.exe". If the "About Windows" dialog box does not display "Microsoft Windows Server Version 1607 (Build 14393.xxx)" or greater, this is a finding. Preview versions must not be used in a production environment.
Fix:	Update the system to a Version 1607 (Build 14393.xxx) or greater.
References:	CCI-000366

STIG ID: WN16-00-000120

Group ID: V-73241

Rule ID: SV-87893r2_rule

Severity: CAT I

Requirement:	The Windows Server 2016 system must use an anti-virus program.
Discussion:	Malicious software can establish a base on individual desktops and servers. Employing an automated mechanism to detect this type of software will aid in elimination of the software from the operating system.
Check:	Verify an anti-virus solution is installed on the system. The anti-virus solution may be bundled with an approved host-based security solution. If there is no anti-virus solution installed on the system, this is a finding.
Fix:	Install an anti-virus solution on the system.
References:	CCI-000366

STIG ID: WN16-00-000140

Group ID: V-73245

Rule ID: SV-87897r1_rule

Severity: CAT II

Requirement:	Servers must have a host-based intrusion detection or prevention system.
Discussion:	A properly configured Host-based Intrusion Detection System (HIDS) or Host-based Intrusion Prevention System (HIPS) provides another level of defense against unauthorized access to critical servers. With proper configuration and logging enabled, such a system can stop and/or alert for many attempts to gain unauthorized access to resources.
Check:	Determine whether there is a HIDS or HIPS on each server. If the HIPS component of HBSS is installed and active on the host and the alerts of blocked activity are being logged and monitored, this meets the requirement. A HIDS device is not required on a system that has the role as the Network Intrusion Device (NID). However, this exception needs to be documented with the ISSO. If a HIDS is not installed on the system, this is a finding.
Fix:	Install a HIDS or HIPS on each server.
References:	CCI-000366

STIG ID: WN16-00-000150

Group ID: V-73247

Rule ID: SV-87899r1_rule

Severity: CAT I

Requirement:	Local volumes must use a format that supports NTFS attributes.
Discussion:	The ability to set access permissions and auditing is critical to maintaining the security and proper access controls of a system. To support this, volumes must be formatted using a file system that supports NTFS attributes.
Check:	Open "Computer Management". Select "Disk Management" under "Storage". For each local volume, if the file system does not indicate "NTFS", this is a finding. "ReFS" (resilient file system) is also acceptable and would not be a finding. This does not apply to system partitions such the Recovery and EFI System Partition.
Fix:	Format volumes to use NTFS or ReFS.
References:	CCI-000213

STIG ID: WN16-00-000160

Group ID: V-73249

Rule ID: SV-87901r1_rule

Severity: CAT II

Requirement:	Permissions for the system drive root directory (usually C:\) must conform to minimum requirements.
Discussion:	Changing the system's file and directory permissions allows the possibility of unauthorized and anonymous modification to the operating system and installed applications. The default permissions are adequate when the Security Option "Network access: Let everyone permissions apply to anonymous users" is set to "Disabled" (WN16-SO-000290). Satisfies: SRG-OS-000312-GPOS-00122, SRG-OS-000312-GPOS-00123, SRG-OS-000312-GPOS-00124
Check:	The default permissions are adequate when the Security Option "Network access: Let everyone permissions apply to anonymous users" is set to "Disabled" (WN16-SO-000290). Review the permissions for the system drive's root directory (usually C:\). Non-privileged groups such as Users or Authenticated Users must not have greater than "Read & execute" permissions except where noted as defaults. (Individual accounts must not be used to assign permissions.) If permissions are not as restrictive as the default permissions listed below, this is a finding. Viewing in File Explorer: View the Properties of the system drive's root directory. Select the "Security" tab, and the "Advanced" button. Default permissions: C:\ Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to SYSTEM - Full control - This folder, subfolders, and files Administrators - Full control - This folder, subfolders, and files Users - Read & execute - This folder, subfolders, and files Users - Create folders/append data - This folder and subfolders Users - Create files/write data - Subfolders only CREATOR OWNER - Full Control - Subfolders and files only Alternately, use icacls: Open "Command Prompt (Admin)". Enter "icacls" followed by the directory: "icacls c:\" The following results should be displayed: c:\ NT AUTHORITY\SYSTEM:(OI)(CI)(F) BUILTIN\Administrators:(OI)(CI)(F) BUILTIN\Users:(OI)(CI)(RX) BUILTIN\Users:(CI)(AD) BUILTIN\Users:(CI)(IO)(WD) CREATOR OWNER:(OI)(CI)(IO)(F) Successfully processed 1 files; Failed processing 0 files
Fix:	Maintain the default permissions for the system drive's root directory and configure the Security Option "Network access: Let everyone permissions apply to anonymous users" to "Disabled" (WN16-SO-000290). Default Permissions C:\ Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to SYSTEM - Full control - This folder, subfolders, and files Administrators - Full control - This folder, subfolders, and files Users - Read & execute - This folder, subfolders, and files Users - Create folders/append data - This folder and subfolders Users - Create files/write data - Subfolders only CREATOR OWNER - Full Control - Subfolders and files only
References:	CCI-002165

STIG ID: WN16-00-000170

Group ID: V-73251

Rule ID: SV-87903r1_rule

Severity: CAT II

Requirement:	Permissions for program file directories must conform to minimum requirements.
Discussion:	Changing the system's file and directory permissions allows the possibility of unauthorized and anonymous modification to the operating system and installed applications. The default permissions are adequate when the Security Option "Network access: Let everyone permissions apply to anonymous users" is set to "Disabled" (WN16-SO-000290). Satisfies: SRG-OS-000312-GPOS-00122, SRG-OS-000312-GPOS-00123, SRG-OS-000312-GPOS-00124
Check:	The default permissions are adequate when the Security Option "Network access: Let everyone permissions apply to anonymous users" is set to "Disabled" (WN16-SO-000290). Review the permissions for the program file directories (Program Files and Program Files [x86]). Non-privileged groups such as Users or Authenticated Users must not have greater than "Read & execute" permissions. (Individual accounts must not be used to assign permissions.) If permissions are not as restrictive as the default permissions listed below, this is a finding. Viewing in File Explorer: For each folder, view the Properties. Select the "Security" tab, and the "Advanced" button. Default permissions: \Program Files and \Program Files (x86) Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to TrustedInstaller - Full control - This folder and subfolders SYSTEM - Modify - This folder only SYSTEM - Full control - Subfolders and files only Administrators - Modify - This folder only Administrators - Full control - Subfolders and files only Users - Read & execute - This folder, subfolders and files CREATOR OWNER - Full control - Subfolders and files only ALL APPLICATION PACKAGES - Read & execute - This folder, subfolders, and files ALL RESTRICTED APPLICATION PACKAGES - Read & execute - This folder, subfolders, and files Alternately, use icacls: Open a Command prompt (admin). Enter "icacls" followed by the directory: 'icacls "c:\program files"' 'icacls "c:\program files (x86)"' The following results should be displayed for each when entered: c:\program files (c:\program files (x86)) NT SERVICE\TrustedInstaller:(F) NT SERVICE\TrustedInstaller:(CI)(IO)(F) NT AUTHORITY\SYSTEM:(M) NT AUTHORITY\SYSTEM:(OI)(CI)(IO)(F) BUILTIN\Administrators:(M) BUILTIN\Administrators:(OI)(CI)(IO)(F) BUILTIN\Users:(RX) BUILTIN\Users:(OI)(CI)(IO)(GR,GE) CREATOR OWNER:(OI)(CI)(IO)(F) APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(RX) APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(OI)(CI)(IO)(GR,GE) APPLICATION PACKAGE AUTHORITY\ALL RESTRICTED APPLICATION PACKAGES:(RX) APPLICATION PACKAGE AUTHORITY\ALL RESTRICTED APPLICATION PACKAGES:(OI)(CI)(IO)(GR,GE) Successfully processed 1 files; Failed processing 0 files
Fix:	Maintain the default permissions for the program file directories and configure the Security Option "Network access: Let everyone permissions apply to anonymous users" to "Disabled" (WN16-SO-000290). Default permissions: \Program Files and \Program Files (x86) Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to TrustedInstaller - Full control - This folder and subfolders SYSTEM - Modify - This folder only SYSTEM - Full control - Subfolders and files only Administrators - Modify - This folder only Administrators - Full control - Subfolders and files only Users - Read & execute - This folder, subfolders, and files CREATOR OWNER - Full control - Subfolders and files only ALL APPLICATION PACKAGES - Read & execute - This folder, subfolders, and files ALL RESTRICTED APPLICATION PACKAGES - Read & execute - This folder, subfolders, and files
References:	CCI-002165

STIG ID: WN16-00-000180

Group ID: V-73253

Rule ID: SV-87905r1_rule

Severity: CAT II

Requirement:	Permissions for the Windows installation directory must conform to minimum requirements.
Discussion:	Changing the system's file and directory permissions allows the possibility of unauthorized and anonymous modification to the operating system and installed applications. The default permissions are adequate when the Security Option "Network access: Let everyone permissions apply to anonymous users" is set to "Disabled" (WN16-SO-000290). Satisfies: SRG-OS-000312-GPOS-00122, SRG-OS-000312-GPOS-00123, SRG-OS-000312-GPOS-00124
Check:	The default permissions are adequate when the Security Option "Network access: Let everyone permissions apply to anonymous users" is set to "Disabled" (WN16-SO-000290). Review the permissions for the Windows installation directory (usually C:\Windows). Non-privileged groups such as Users or Authenticated Users must not have greater than "Read & execute" permissions. (Individual accounts must not be used to assign permissions.) If permissions are not as restrictive as the default permissions listed below, this is a finding. Viewing in File Explorer: For each folder, view the Properties. Select the "Security" tab and the "Advanced" button. Default permissions: \Windows Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to TrustedInstaller - Full control - This folder and subfolders SYSTEM - Modify - This folder only SYSTEM - Full control - Subfolders and files only Administrators - Modify - This folder only Administrators - Full control - Subfolders and files only Users - Read & execute - This folder, subfolders, and files CREATOR OWNER - Full control - Subfolders and files only ALL APPLICATION PACKAGES - Read & execute - This folder, subfolders, and files ALL RESTRICTED APPLICATION PACKAGES - Read & execute - This folder, subfolders, and files Alternately, use icacls: Open a Command prompt (admin). Enter "icacls" followed by the directory: "icacls c:\windows" The following results should be displayed for each when entered: c:\windows NT SERVICE\TrustedInstaller:(F) NT SERVICE\TrustedInstaller:(CI)(IO)(F) NT AUTHORITY\SYSTEM:(M) NT AUTHORITY\SYSTEM:(OI)(CI)(IO)(F) BUILTIN\Administrators:(M) BUILTIN\Administrators:(OI)(CI)(IO)(F) BUILTIN\Users:(RX) BUILTIN\Users:(OI)(CI)(IO)(GR,GE) CREATOR OWNER:(OI)(CI)(IO)(F) APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(RX) APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(OI)(CI)(IO)(GR,GE) APPLICATION PACKAGE AUTHORITY\ALL RESTRICTED APPLICATION PACKAGES:(RX) APPLICATION PACKAGE AUTHORITY\ALL RESTRICTED APPLICATION PACKAGES:(OI)(CI)(IO)(GR,GE) Successfully processed 1 files; Failed processing 0 files
Fix:	Maintain the default file ACLs and configure the Security Option "Network access: Let everyone permissions apply to anonymous users" to "Disabled" (WN16-SO-000290). Default permissions: Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to TrustedInstaller - Full control - This folder and subfolders SYSTEM - Modify - This folder only SYSTEM - Full control - Subfolders and files only Administrators - Modify - This folder only Administrators - Full control - Subfolders and files only Users - Read & execute - This folder, subfolders, and files CREATOR OWNER - Full control - Subfolders and files only ALL APPLICATION PACKAGES - Read & execute - This folder, subfolders, and files ALL RESTRICTED APPLICATION PACKAGES - Read & execute - This folder, subfolders, and files
References:	CCI-002165

STIG ID: WN16-00-000190

Group ID: V-73255

Rule ID: SV-87907r1_rule

Severity: CAT II

Requirement:	Default permissions for the HKEY_LOCAL_MACHINE registry hive must be maintained.
Discussion:	The registry is integral to the function, security, and stability of the Windows system. Changing the system's registry permissions allows the possibility of unauthorized and anonymous modification to the operating system.
Check:	Review the registry permissions for the keys of the HKEY_LOCAL_MACHINE hive noted below. If any non-privileged groups such as Everyone, Users, or Authenticated Users have greater than Read permission, this is a finding. If permissions are not as restrictive as the default permissions listed below, this is a finding. Run "Regedit". Right-click on the registry areas noted below. Select "Permissions..." and the "Advanced" button. HKEY_LOCAL_MACHINE\SECURITY Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to SYSTEM - Full Control - This key and subkeys Administrators - Special - This key and subkeys HKEY_LOCAL_MACHINE\SOFTWARE Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to Users - Read - This key and subkeys Administrators - Full Control - This key and subkeys SYSTEM - Full Control - This key and subkeys CREATOR OWNER - Full Control - This key and subkeys ALL APPLICATION PACKAGES - Read - This key and subkeys HKEY_LOCAL_MACHINE\SYSTEM Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to Users - Read - This key and subkeys Administrators - Full Control - This key and subkeys SYSTEM - Full Control - This key and subkeys CREATOR OWNER - Full Control - Subkeys only ALL APPLICATION PACKAGES - Read - This key and subkeys Other examples under the noted keys may also be sampled. There may be some instances where non-privileged groups have greater than Read permission. If the defaults have not been changed, these are not a finding.
Fix:	Maintain the default permissions for the HKEY_LOCAL_MACHINE registry hive. The default permissions of the higher-level keys are noted below. HKEY_LOCAL_MACHINE\SECURITY Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to SYSTEM - Full Control - This key and subkeys Administrators - Special - This key and subkeys HKEY_LOCAL_MACHINE\SOFTWARE Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to Users - Read - This key and subkeys Administrators - Full Control - This key and subkeys SYSTEM - Full Control - This key and subkeys CREATOR OWNER - Full Control - This key and subkeys ALL APPLICATION PACKAGES - Read - This key and subkeys HKEY_LOCAL_MACHINE\SYSTEM Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to Users - Read - This key and subkeys Administrators - Full Control - This key and subkeys SYSTEM - Full Control - This key and subkeys CREATOR OWNER - Full Control - Subkeys only ALL APPLICATION PACKAGES - Read - This key and subkeys
References:	CCI-002235

STIG ID: WN16-00-000200

Group ID: V-73257

Rule ID: SV-87909r1_rule

Severity: CAT III

Requirement:	Non-administrative accounts or groups must only have print permissions on printer shares.
Discussion:	Windows shares are a means by which files, folders, printers, and other resources can be published for network users to access. Improper configuration can permit access to devices and data beyond a user's need.
Check:	Open "Devices and Printers". If there are no printers configured, this is NA. (Exclude Microsoft Print to PDF and Microsoft XPS Document Writer, which do not support sharing.) For each printer: Right-click on the printer. Select "Printer Properties". Select the "Sharing" tab. If "Share this printer" is checked, select the "Security" tab. If any standard user accounts or groups have permissions other than "Print", this is a finding. The default is for the "Everyone" group to be given "Print" permission. "All APPLICATION PACKAGES" and "CREATOR OWNER" are not standard user accounts.
Fix:	Configure the permissions on shared printers to restrict standard users to only have Print permissions.
References:	CCI-000213

STIG ID: WN16-00-000210

Group ID: V-73259

Rule ID: SV-87911r3_rule

Severity: CAT II

Requirement:	Outdated or unused accounts must be removed from the system or disabled.
Discussion:	Outdated or unused accounts provide penetration points that may go undetected. Inactive accounts must be deleted if no longer necessary or, if still required, disabled until needed. Satisfies: SRG-OS-000104-GPOS-00051, SRG-OS-000118-GPOS-00060
Check:	Open "Windows PowerShell". Domain Controllers: Enter "Search-ADAccount -AccountInactive -UsersOnly -TimeSpan 35.00:00:00" This will return accounts that have not been logged on to for 35 days, along with various attributes such as the Enabled status and LastLogonDate. Member servers and standalone systems: Copy or enter the lines below to the PowerShell window and enter. (Entering twice may be required. Do not include the quotes at the beginning and end of the query.) "([ADSI]('WinNT://{0}' -f $env:COMPUTERNAME)).Children | Where { $_.SchemaClassName -eq 'user' } | ForEach { $user = ([ADSI]$_.Path) $lastLogin = $user.Properties.LastLogin.Value $enabled = ($user.Properties.UserFlags.Value -band 0x2) -ne 0x2 if ($lastLogin -eq $null) { $lastLogin = 'Never' } Write-Host $user.Name $lastLogin $enabled }" This will return a list of local accounts with the account name, last logon, and if the account is enabled (True/False). For example: User1 10/31/2015 5:49:56 AM True Review the list of accounts returned by the above queries to determine the finding validity for each account reported. Exclude the following accounts: - Built-in administrator account (Renamed, SID ending in 500) - Built-in guest account (Renamed, Disabled, SID ending in 501) - Built-in default account (Renamed, Disabled, SID ending in 503) - Application accounts If any enabled accounts have not been logged on to within the past 35 days, this is a finding. Inactive accounts that have been reviewed and deemed to be required must be documented with the ISSO.
Fix:	Regularly review accounts to determine if they are still active. Remove or disable accounts that have not been used in the last 35 days.
References:	CCI-000764 CCI-000795

STIG ID: WN16-00-000220

Group ID: V-73261

Rule ID: SV-87913r4_rule

Severity: CAT II

Requirement:	Windows Server 2016 accounts must require passwords.
Discussion:	The lack of password protection enables anyone to gain access to the information system, which opens a backdoor opportunity for intruders to compromise the system as well as other resources. Accounts on a system must require passwords.
Check:	Review the password required status for enabled user accounts. Open "PowerShell". Domain Controllers: Enter "Get-Aduser -Filter * -Properties Passwordnotrequired |FT Name, Passwordnotrequired, Enabled". Exclude disabled accounts (e.g., DefaultAccount, Guest) and Trusted Domain Objects (TDOs). If "Passwordnotrequired" is "True" or blank for any enabled user account, this is a finding. Member servers and standalone systems: Enter 'Get-CimInstance -Class Win32_Useraccount -Filter "PasswordRequired=False and LocalAccount=True" | FT Name, PasswordRequired, Disabled, LocalAccount'. Exclude disabled accounts (e.g., DefaultAccount, Guest). If any enabled user accounts are returned with a "PasswordRequired" status of "False", this is a finding.
Fix:	Configure all enabled accounts to require passwords. The password required flag can be set by entering the following on a command line: "Net user [username] /passwordreq:yes", substituting [username] with the name of the user account.
References:	CCI-000764

STIG ID: WN16-00-000230

Group ID: V-73263

Rule ID: SV-87915r2_rule

Severity: CAT II

Requirement:	Passwords must be configured to expire.
Discussion:	Passwords that do not expire or are reused increase the exposure of a password with greater probability of being discovered or cracked.
Check:	Review the password never expires status for enabled user accounts. Open "PowerShell". Domain Controllers: Enter "Search-ADAccount -PasswordNeverExpires -UsersOnly | FT Name, PasswordNeverExpires, Enabled". Exclude application accounts, disabled accounts (e.g., DefaultAccount, Guest) and the krbtgt account. If any enabled user accounts are returned with a "PasswordNeverExpires" status of "True", this is a finding. Member servers and standalone systems: Enter 'Get-CimInstance -Class Win32_Useraccount -Filter "PasswordExpires=False and LocalAccount=True" | FT Name, PasswordExpires, Disabled, LocalAccount'. Exclude application accounts and disabled accounts (e.g., DefaultAccount, Guest). If any enabled user accounts are returned with a "PasswordExpires" status of "False", this is a finding.
Fix:	Configure all enabled user account passwords to expire. Uncheck "Password never expires" for all enabled user accounts in Active Directory Users and Computers for domain accounts and Users in Computer Management for member servers and standalone systems. Document any exceptions with the ISSO.
References:	CCI-000199

STIG ID: WN16-00-000240

Group ID: V-73265

Rule ID: SV-87917r1_rule

Severity: CAT II

Requirement:	System files must be monitored for unauthorized changes.
Discussion:	Monitoring system files for changes against a baseline on a regular basis may help detect the possible introduction of malicious code on a system.
Check:	Determine whether the system is monitored for unauthorized changes to system files (e.g., *.exe, *.bat, *.com, *.cmd, and *.dll) against a baseline on a weekly basis. If system files are not monitored for unauthorized changes, this is a finding. A properly configured HBSS Policy Auditor 5.2 or later File Integrity Monitor (FIM) module will meet the requirement for file integrity checking. The Asset module within HBSS does not meet this requirement.
Fix:	Monitor the system for unauthorized changes to system files (e.g., *.exe, *.bat, *.com, *.cmd, and *.dll) against a baseline on a weekly basis. This can be done with the use of various monitoring tools.
References:	CCI-001744

STIG ID: WN16-00-000250

Group ID: V-73267

Rule ID: SV-87919r1_rule

Severity: CAT II

Requirement:	Non-system-created file shares on a system must limit access to groups that require it.
Discussion:	Shares on a system provide network access. To prevent exposing sensitive information, where shares are necessary, permissions must be reconfigured to give the minimum access to accounts that require it.
Check:	If only system-created shares such as "ADMIN$", "C$", and "IPC$" exist on the system, this is NA. (System-created shares will display a message that it has been shared for administrative purposes when "Properties" is selected.) Run "Computer Management". Navigate to System Tools >> Shared Folders >> Shares. Right-click any non-system-created shares. Select "Properties". Select the "Share Permissions" tab. If the file shares have not been configured to restrict permissions to the specific groups or accounts that require access, this is a finding. Select the "Security" tab. If the permissions have not been configured to restrict permissions to the specific groups or accounts that require access, this is a finding.
Fix:	If a non-system-created share is required on a system, configure the share and NTFS permissions to limit access to the specific groups or accounts that require it. Remove any unnecessary non-system-created shares.
References:	CCI-001090

STIG ID: WN16-00-000270

Group ID: V-73271

Rule ID: SV-87923r2_rule

Severity: CAT II

Requirement:	Software certificate installation files must be removed from Windows Server 2016.
Discussion:	Use of software certificates and their accompanying installation files for end users to access resources is less secure than the use of hardware-based certificates.
Check:	Search all drives for *.p12 and *.pfx files. If any files with these extensions exist, this is a finding. This does not apply to server-based applications that have a requirement for .p12 certificate files or Adobe PreFlight certificate files. Some applications create files with extensions of .p12 that are not certificate installation files. Removal of non-certificate installation files from systems is not required. These must be documented with the ISSO.
Fix:	Remove any certificate installation files (*.p12 and *.pfx) found on a system. Note: This does not apply to server-based applications that have a requirement for .p12 certificate files or Adobe PreFlight certificate files.
References:	CCI-000366

STIG ID: WN16-00-000280

Group ID: V-73273

Rule ID: SV-87925r1_rule

Severity: CAT II

Requirement:	Systems requiring data at rest protections must employ cryptographic mechanisms to prevent unauthorized disclosure and modification of the information at rest.
Discussion:	This requirement addresses protection of user-generated data as well as operating system-specific configuration data. Organizations may choose to employ different mechanisms to achieve confidentiality and integrity protections, as appropriate, in accordance with the security category and/or classification of the information. Selection of a cryptographic mechanism is based on the need to protect the integrity of organizational information. The strength of the mechanism is commensurate with the security category and/or classification of the information. Organizations have the flexibility to either encrypt all information on storage devices (i.e., full disk encryption) or encrypt specific data structures (e.g., files, records, or fields). Satisfies: SRG-OS-000185-GPOS-00079, SRG-OS-000404-GPOS-00183, SRG-OS-000405-GPOS-00184
Check:	Verify systems that require additional protections due to factors such as inadequate physical protection or sensitivity of the data employ encryption to protect the confidentiality and integrity of all information at rest. If they do not, this is a finding.
Fix:	Configure systems that require additional protections due to factors such as inadequate physical protection or sensitivity of the data to employ encryption to protect the confidentiality and integrity of all information at rest.
References:	CCI-001199 CCI-002475 CCI-002476

STIG ID: WN16-00-000290

Group ID: V-73275

Rule ID: SV-87927r1_rule

Severity: CAT II

Requirement:	Protection methods such as TLS, encrypted VPNs, or IPsec must be implemented if the data owner has a strict requirement for ensuring data integrity and confidentiality is maintained at every step of the data transfer and handling process.
Discussion:	Information can be either unintentionally or maliciously disclosed or modified during preparation for transmission, for example, during aggregation, at protocol transformation points, and during packing/unpacking. These unauthorized disclosures or modifications compromise the confidentiality or integrity of the information. Ensuring the confidentiality of transmitted information requires the operating system to take measures in preparing information for transmission. This can be accomplished via access control and encryption. Use of this requirement will be limited to situations where the data owner has a strict requirement for ensuring data integrity and confidentiality is maintained at every step of the data transfer and handling process. When transmitting data, operating systems need to support transmission protection mechanisms such as TLS, encrypted VPNs, or IPsec. Satisfies: SRG-OS-000425-GPOS-00189, SRG-OS-000426-GPOS-00190
Check:	If the data owner has a strict requirement for ensuring data integrity and confidentiality is maintained at every step of the data transfer and handling process, verify protection methods such as TLS, encrypted VPNs, or IPsec have been implemented. If protection methods have not been implemented, this is a finding.
Fix:	Configure protection methods such as TLS, encrypted VPNs, or IPsec when the data owner has a strict requirement for ensuring data integrity and confidentiality is maintained at every step of the data transfer and handling process.
References:	CCI-002420 CCI-002422

STIG ID: WN16-00-000300

Group ID: V-73277

Rule ID: SV-87929r1_rule

Severity: CAT II

Requirement:	The roles and features required by the system must be documented.
Discussion:	Unnecessary roles and features increase the attack surface of a system. Limiting roles and features of a system to only those necessary reduces this potential. The standard installation option (previously called Server Core) further reduces this when selected at installation.
Check:	Required roles and features will vary based on the function of the individual system. Roles and features specifically required to be disabled per the STIG are identified in separate requirements. If the organization has not documented the roles and features required for the system(s), this is a finding. The PowerShell command "Get-WindowsFeature" will list all roles and features with an "Install State".
Fix:	Document the roles and features required for the system to operate. Uninstall any that are not required.
References:	CCI-000381

STIG ID: WN16-00-000310

Group ID: V-73279

Rule ID: SV-87931r1_rule

Severity: CAT II

Requirement:	A host-based firewall must be installed and enabled on the system.
Discussion:	A firewall provides a line of defense against attack, allowing or blocking inbound and outbound connections based on a set of rules.
Check:	Determine if a host-based firewall is installed and enabled on the system. If a host-based firewall is not installed and enabled on the system, this is a finding. The configuration requirements will be determined by the applicable firewall STIG.
Fix:	Install and enable a host-based firewall on the system.
References:	CCI-000366 CCI-002080

STIG ID: WN16-00-000320

Group ID: V-73281

Rule ID: SV-87933r2_rule

Severity: CAT II

Requirement:	Windows Server 2016 must employ automated mechanisms to determine the state of system components with regard to flaw remediation using the following frequency: continuously, where Host Based Security System (HBSS) is used; 30 days, for any additional internal network scans not covered by HBSS; and annually, for external scans by Computer Network Defense Service Provider (CNDSP).
Discussion:	Without the use of automated mechanisms to scan for security flaws on a continuous and/or periodic basis, the operating system or other system components may remain vulnerable to the exploits presented by undetected software flaws. The operating system may have an integrated solution incorporating continuous scanning using HBSS and periodic scanning using other tools.
Check:	Verify DoD approved HBSS software is installed, configured, and properly operating. Ask the operator to document the HBSS software installation and configuration. If the operator is not able to provide a documented configuration for an installed HBSS or if the HBSS software is not properly configured, maintained, or used, this is a finding.
Fix:	Install a DoD approved HBSS software and ensure it is operating continuously.
References:	CCI-001233

STIG ID: WN16-00-000330

Group ID: V-73283

Rule ID: SV-87935r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must automatically remove or disable temporary user accounts after 72 hours.
Discussion:	If temporary user accounts remain active when no longer needed or for an excessive period, these accounts may be used to gain unauthorized access. To mitigate this risk, automated termination of all temporary accounts must be set upon account creation. Temporary accounts are established as part of normal account activation procedures when there is a need for short-term accounts without the demand for immediacy in account activation. If temporary accounts are used, the operating system must be configured to automatically terminate these types of accounts after a DoD-defined time period of 72 hours. To address access requirements, many operating systems may be integrated with enterprise-level authentication/access mechanisms that meet or exceed access control policy requirements.
Check:	Review temporary user accounts for expiration dates. Determine if temporary user accounts are used and identify any that exist. If none exist, this is NA. Domain Controllers: Open "PowerShell". Enter "Search-ADAccount -AccountExpiring | FT Name, AccountExpirationDate". If "AccountExpirationDate" has not been defined within 72 hours for any temporary user account, this is a finding. Member servers and standalone systems: Open "Command Prompt". Run "Net user [username]", where [username] is the name of the temporary user account. If "Account expires" has not been defined within 72 hours for any temporary user account, this is a finding.
Fix:	Configure temporary user accounts to automatically expire within 72 hours. Domain accounts can be configured with an account expiration date, under "Account" properties. Local accounts can be configured to expire with the command "Net user [username] /expires:[mm/dd/yyyy]", where username is the name of the temporary user account. Delete any temporary user accounts that are no longer necessary.
References:	CCI-000016

STIG ID: WN16-00-000340

Group ID: V-73285

Rule ID: SV-87937r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must automatically remove or disable emergency accounts after the crisis is resolved or within 72 hours.
Discussion:	Emergency administrator accounts are privileged accounts established in response to crisis situations where the need for rapid account activation is required. Therefore, emergency account activation may bypass normal account authorization processes. If these accounts are automatically disabled, system maintenance during emergencies may not be possible, thus adversely affecting system availability. Emergency administrator accounts are different from infrequently used accounts (i.e., local logon accounts used by system administrators when network or normal logon/access is not available). Infrequently used accounts are not subject to automatic termination dates. Emergency accounts are accounts created in response to crisis situations, usually for use by maintenance personnel. The automatic expiration or disabling time period may be extended as needed until the crisis is resolved; however, it must not be extended indefinitely. A permanent account should be established for privileged users who need long-term maintenance accounts. To address access requirements, many operating systems can be integrated with enterprise-level authentication/access mechanisms that meet or exceed access control policy requirements.
Check:	Determine if emergency administrator accounts are used and identify any that exist. If none exist, this is NA. If emergency administrator accounts cannot be configured with an expiration date due to an ongoing crisis, the accounts must be disabled or removed when the crisis is resolved. If emergency administrator accounts have not been configured with an expiration date or have not been disabled or removed following the resolution of a crisis, this is a finding. Domain Controllers: Open "PowerShell". Enter "Search-ADAccount –AccountExpiring | FT Name, AccountExpirationDate". If "AccountExpirationDate" has been defined and is not within 72 hours for an emergency administrator account, this is a finding. Member servers and standalone systems: Open "Command Prompt". Run "Net user [username]", where [username] is the name of the emergency account. If "Account expires" has been defined and is not within 72 hours for an emergency administrator account, this is a finding.
Fix:	Remove emergency administrator accounts after a crisis has been resolved or configure the accounts to automatically expire within 72 hours. Domain accounts can be configured with an account expiration date, under "Account" properties. Local accounts can be configured to expire with the command "Net user [username] /expires:[mm/dd/yyyy]", where username is the name of the temporary user account.
References:	CCI-001682

STIG ID: WN16-00-000350

Group ID: V-73287

Rule ID: SV-87939r1_rule

Severity: CAT II

Requirement:	The Fax Server role must not be installed.
Discussion:	Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption or may provide unauthorized access to the system.
Check:	Open "PowerShell". Enter "Get-WindowsFeature | Where Name -eq Fax". If "Installed State" is "Installed", this is a finding. An Installed State of "Available" or "Removed" is not a finding.
Fix:	Uninstall the "Fax Server" role. Start "Server Manager". Select the server with the role. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "Fax Server" on the "Roles" page. Click "Next" and "Remove" as prompted.
References:	CCI-000381

STIG ID: WN16-00-000360

Group ID: V-73289

Rule ID: SV-87941r1_rule

Severity: CAT II

Requirement:	The Microsoft FTP service must not be installed unless required.
Discussion:	Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption.
Check:	If the server has the role of an FTP server, this is NA. Open "PowerShell". Enter "Get-WindowsFeature | Where Name -eq Web-Ftp-Service". If "Installed State" is "Installed", this is a finding. An Installed State of "Available" or "Removed" is not a finding. If the system has the role of an FTP server, this must be documented with the ISSO.
Fix:	Uninstall the "FTP Server" role. Start "Server Manager". Select the server with the role. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "FTP Server" under "Web Server (IIS)" on the "Roles" page. Click "Next" and "Remove" as prompted.
References:	CCI-000382

STIG ID: WN16-00-000370

Group ID: V-73291

Rule ID: SV-87943r1_rule

Severity: CAT II

Requirement:	The Peer Name Resolution Protocol must not be installed.
Discussion:	Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption or may provide unauthorized access to the system.
Check:	Open "PowerShell". Enter "Get-WindowsFeature | Where Name -eq PNRP". If "Installed State" is "Installed", this is a finding. An Installed State of "Available" or "Removed" is not a finding.
Fix:	Uninstall the "Peer Name Resolution Protocol" feature. Start "Server Manager". Select the server with the feature. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "Peer Name Resolution Protocol" on the "Features" page. Click "Next" and "Remove" as prompted.
References:	CCI-000381

STIG ID: WN16-00-000380

Group ID: V-73293

Rule ID: SV-87945r1_rule

Severity: CAT II

Requirement:	Simple TCP/IP Services must not be installed.
Discussion:	Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption or may provide unauthorized access to the system.
Check:	Open "PowerShell". Enter "Get-WindowsFeature | Where Name -eq Simple-TCPIP". If "Installed State" is "Installed", this is a finding. An Installed State of "Available" or "Removed" is not a finding.
Fix:	Uninstall the "Simple TCP/IP Services" feature. Start "Server Manager". Select the server with the feature. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "Simple TCP/IP Services" on the "Features" page. Click "Next" and "Remove" as prompted.
References:	CCI-000381

STIG ID: WN16-00-000390

Group ID: V-73295

Rule ID: SV-87947r1_rule

Severity: CAT II

Requirement:	The Telnet Client must not be installed.
Discussion:	Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption or may provide unauthorized access to the system.
Check:	Open "PowerShell". Enter "Get-WindowsFeature | Where Name -eq Telnet-Client". If "Installed State" is "Installed", this is a finding. An Installed State of "Available" or "Removed" is not a finding.
Fix:	Uninstall the "Telnet Client" feature. Start "Server Manager". Select the server with the feature. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "Telnet Client" on the "Features" page. Click "Next" and "Remove" as prompted.
References:	CCI-000382

STIG ID: WN16-00-000400

Group ID: V-73297

Rule ID: SV-87949r1_rule

Severity: CAT II

Requirement:	The TFTP Client must not be installed.
Discussion:	Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption or may provide unauthorized access to the system.
Check:	Open "PowerShell". Enter "Get-WindowsFeature | Where Name -eq TFTP-Client". If "Installed State" is "Installed", this is a finding. An Installed State of "Available" or "Removed" is not a finding.
Fix:	Uninstall the "TFTP Client" feature. Start "Server Manager". Select the server with the feature. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "TFTP Client" on the "Features" page. Click "Next" and "Remove" as prompted.
References:	CCI-000381

STIG ID: WN16-00-000410

Group ID: V-73299

Rule ID: SV-87951r2_rule

Severity: CAT II

Requirement:	The Server Message Block (SMB) v1 protocol must be uninstalled.
Discussion:	SMBv1 is a legacy protocol that uses the MD5 algorithm as part of SMB. MD5 is known to be vulnerable to a number of attacks such as collision and preimage attacks and is not FIPS compliant.
Check:	Different methods are available to disable SMBv1 on Windows 2016. This is the preferred method, however if V-78123 and V-78125 are configured, this is NA. Open "Windows PowerShell" with elevated privileges (run as administrator). Enter "Get-WindowsFeature -Name FS-SMB1". If "Installed State" is "Installed", this is a finding. An Installed State of "Available" or "Removed" is not a finding.
Fix:	Uninstall the SMBv1 protocol. Open "Windows PowerShell" with elevated privileges (run as administrator). Enter "Uninstall-WindowsFeature -Name FS-SMB1 -Restart". (Omit the Restart parameter if an immediate restart of the system cannot be done.) Alternately: Start "Server Manager". Select the server with the feature. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "SMB 1.0/CIFS File Sharing Support" on the "Features" page. Click "Next" and "Remove" as prompted.
References:	CCI-000381

STIG ID: WN16-00-000411

Group ID: V-78123

Rule ID: SV-92829r1_rule

Severity: CAT II

Requirement:	The Server Message Block (SMB) v1 protocol must be disabled on the SMB server.
Discussion:	SMBv1 is a legacy protocol that uses the MD5 algorithm as part of SMB. MD5 is known to be vulnerable to a number of attacks such as collision and preimage attacks as well as not being FIPS compliant.
Check:	Different methods are available to disable SMBv1 on Windows 2016, if V-73299 is configured, this is NA. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\ Value Name: SMB1 Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> MS Security Guide >> "Configure SMBv1 Server" to "Disabled". The system must be restarted for the change to take effect. This policy setting requires the installation of the SecGuide custom templates included with the STIG package. "SecGuide.admx" and "SecGuide.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.
References:	CCI-000381

STIG ID: WN16-00-000412

Group ID: V-78125

Rule ID: SV-92831r1_rule

Severity: CAT II

Requirement:	The Server Message Block (SMB) v1 protocol must be disabled on the SMB client.
Discussion:	SMBv1 is a legacy protocol that uses the MD5 algorithm as part of SMB. MD5 is known to be vulnerable to a number of attacks such as collision and preimage attacks as well as not being FIPS compliant.
Check:	Different methods are available to disable SMBv1 on Windows 2016, if V-73299 is configured, this is NA. If the following registry value is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\mrxsmb10\ Value Name: Start Type: REG_DWORD Value: 0x00000004 (4)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> MS Security Guide >> "Configure SMBv1 client driver" to "Enabled" with "Disable driver (recommended)" selected for "Configure MrxSmb10 driver". The system must be restarted for the changes to take effect. This policy setting requires the installation of the SecGuide custom templates included with the STIG package. "SecGuide.admx" and "SecGuide.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.
References:	CCI-000381

STIG ID: WN16-00-000420

Group ID: V-73301

Rule ID: SV-87953r1_rule

Severity: CAT II

Requirement:	Windows PowerShell 2.0 must not be installed.
Discussion:	Windows PowerShell 5.0 added advanced logging features that can provide additional detail when malware has been run on a system. Disabling the Windows PowerShell 2.0 mitigates against a downgrade attack that evades the Windows PowerShell 5.0 script block logging feature.
Check:	Open "PowerShell". Enter "Get-WindowsFeature | Where Name -eq PowerShell-v2". If "Installed State" is "Installed", this is a finding. An Installed State of "Available" or "Removed" is not a finding.
Fix:	Uninstall the "Windows PowerShell 2.0 Engine". Start "Server Manager". Select the server with the feature. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "Windows PowerShell 2.0 Engine" under "Windows PowerShell" on the "Features" page. Click "Next" and "Remove" as prompted.
References:	CCI-000381

STIG ID: WN16-00-000430

Group ID: V-73303

Rule ID: SV-87955r1_rule

Severity: CAT II

Requirement:	FTP servers must be configured to prevent anonymous logons.
Discussion:	The FTP service allows remote users to access shared files and directories. Allowing anonymous FTP connections makes user auditing difficult. Using accounts that have administrator privileges to log on to FTP risks that the userid and password will be captured on the network and give administrator access to an unauthorized user.
Check:	If FTP is not installed on the system, this is NA. Open "Internet Information Services (IIS) Manager". Select the server. Double-click "FTP Authentication". If the "Anonymous Authentication" status is "Enabled", this is a finding.
Fix:	Configure the FTP service to prevent anonymous logons. Open "Internet Information Services (IIS) Manager". Select the server. Double-click "FTP Authentication". Select "Anonymous Authentication". Select "Disabled" under "Actions".
References:	CCI-000366

STIG ID: WN16-00-000440

Group ID: V-73305

Rule ID: SV-87957r1_rule

Severity: CAT II

Requirement:	FTP servers must be configured to prevent access to the system drive.
Discussion:	The FTP service allows remote users to access shared files and directories that could provide access to system resources and compromise the system, especially if the user can gain access to the root directory of the boot drive.
Check:	If FTP is not installed on the system, this is NA. Open "Internet Information Services (IIS) Manager". Select "Sites" under the server name. For any sites with a Binding that lists FTP, right-click the site and select "Explore". If the site is not defined to a specific folder for shared FTP resources, this is a finding. If the site includes any system areas such as root of the drive, Program Files, or Windows directories, this is a finding.
Fix:	Configure the FTP sites to allow access only to specific FTP shared resources. Do not allow access to other areas of the system.
References:	CCI-000366

STIG ID: WN16-00-000450

Group ID: V-73307

Rule ID: SV-87959r1_rule

Severity: CAT III

Requirement:	The time service must synchronize with an appropriate DoD time source.
Discussion:	The Windows Time Service controls time synchronization settings. Time synchronization is essential for authentication and auditing purposes. If the Windows Time Service is used, it must synchronize with a secure, authorized time source. Domain-joined systems are automatically configured to synchronize with domain controllers. If an NTP server is configured, it must synchronize with a secure, authorized time source.
Check:	Review the Windows time service configuration. Open an elevated "Command Prompt" (run as administrator). Enter "W32tm /query /configuration". Domain-joined systems (excluding the domain controller with the PDC emulator role): If the value for "Type" under "NTP Client" is not "NT5DS", this is a finding. Other systems: If systems are configured with a "Type" of "NTP", including standalone systems and the domain controller with the PDC Emulator role, and do not have a DoD time server defined for "NTPServer", this is a finding. To determine the domain controller with the PDC Emulator role: Open "PowerShell". Enter "Get-ADDomain | FT PDCEmulator".
Fix:	Configure the system to synchronize time with an appropriate DoD time source. Domain-joined systems use NT5DS to synchronize time from other systems in the domain by default. If the system needs to be configured to an NTP server, configure the system to point to an authorized time server by setting the policy value for Computer Configuration >> Administrative Templates >> System >> Windows Time Service >> Time Providers >> "Configure Windows NTP Client" to "Enabled", and configure the "NtpServer" field to point to an appropriate DoD time server. The US Naval Observatory operates stratum 1 time servers, identified at http://tycho.usno.navy.mil/ntp.html. Time synchronization will occur through a hierarchy of time servers down to the local level. Clients and lower-level servers will synchronize with an authorized time server in the hierarchy.
References:	CCI-001891

STIG ID: WN16-00-000460

Group ID: V-78127

Rule ID: SV-92833r2_rule

Severity: CAT II

Requirement:	Orphaned security identifiers (SIDs) must be removed from user rights on Windows 2016.
Discussion:	Accounts or groups given rights on a system may show up as unresolved SIDs for various reasons including deletion of the accounts or groups. If the account or group objects are reanimated, there is a potential they may still have rights no longer intended. Valid domain accounts or groups may also show up as unresolved SIDs if a connection to the domain cannot be established for some reason.
Check:	Review the effective User Rights setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. Review each User Right listed for any unresolved SIDs to determine whether they are valid, such as due to being temporarily disconnected from the domain. (Unresolved SIDs have the format of "*S-1-…".) If any unresolved SIDs exist and are not for currently valid accounts or groups, this is a finding. For server core installations, run the following command: Secedit /export /areas USER_RIGHTS /cfg c:\path\UserRights.txt The results in the file identify user right assignments by SID instead of group name. Review the SIDs for unidentified ones. A list of typical SIDs \ Groups is below, search Microsoft for articles on well-known SIDs for others. If any unresolved SIDs exist and are not for currently valid accounts or groups, this is a finding. SID - Group S-1-5-11 - Authenticated Users S-1-5-113 - Local account S-1-5-114 - Local account and member of Administrators group S-1-5-19 - Local Service S-1-5-20 - Network Service S-1-5-32-544 - Administrators S-1-5-32-546 - Guests S-1-5-6 - Service S-1-5-9 - Enterprise Domain Controllers S-1-5-domain-512 - Domain Admins S-1-5-root domain-519 - Enterprise Admins S-1-5-80-3139157870-2983391045-3678747466-658725712-1809340420 - NT Service\WdiServiceHost
Fix:	Remove any unresolved SIDs found in User Rights assignments and determined to not be for currently valid accounts or groups by removing the accounts or groups from the appropriate group policy.
References:	CCI-000366

STIG ID: WN16-00-000470

Group ID: V-90355

Rule ID: SV-101005r2_rule

Severity: CAT III

Requirement:	Secure Boot must be enabled on Windows Server 2016 systems.
Discussion:	Secure Boot is a standard that ensures systems boot only to a trusted operating system. Secure Boot is required to support additional security features in Windows Server 2016, including Virtualization Based Security and Credential Guard. If Secure Boot is turned off, these security features will not function.
Check:	Some older systems may not have UEFI firmware. This is currently a CAT III; it will be raised in severity at a future date when broad support of Windows hardware and firmware requirements are expected to be met. Devices that have UEFI firmware must have Secure Boot enabled. Run "System Information". Under "System Summary", if "Secure Boot State" does not display "On", this is finding.
Fix:	Enable Secure Boot in the system firmware.
References:	CCI-000366

STIG ID: WN16-00-000480

Group ID: V-90357

Rule ID: SV-101007r2_rule

Severity: CAT III

Requirement:	Windows 2016 systems must have Unified Extensible Firmware Interface (UEFI) firmware and be configured to run in UEFI mode, not Legacy BIOS.
Discussion:	UEFI provides additional security features in comparison to legacy BIOS firmware, including Secure Boot. UEFI is required to support additional security features in Windows Server 2016, including Virtualization Based Security and Credential Guard. Systems with UEFI that are operating in "Legacy BIOS" mode will not support these security features.
Check:	Some older systems may not have UEFI firmware. This is currently a CAT III; it will be raised in severity at a future date when broad support of Windows hardware and firmware requirements are expected to be met. Devices that have UEFI firmware must run in "UEFI" mode. Verify the system firmware is configured to run in "UEFI" mode, not "Legacy BIOS". Run "System Information". Under "System Summary", if "BIOS Mode" does not display "UEFI", this is finding.
Fix:	Configure UEFI firmware to run in "UEFI" mode, not "Legacy BIOS" mode.
References:	CCI-000366

STIG ID: WN16-AC-000010

Group ID: V-73309

Rule ID: SV-87961r3_rule

Severity: CAT II

Requirement:	Windows 2016 account lockout duration must be configured to 15 minutes or greater.
Discussion:	The account lockout feature, when enabled, prevents brute-force password attacks on the system. This parameter specifies the period of time that an account will remain locked after the specified number of failed logon attempts.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy. If the "Account lockout duration" is less than "15" minutes (excluding "0"), this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "LockoutDuration" is less than "15" (excluding "0") in the file, this is a finding. Configuring this to "0", requiring an administrator to unlock the account, is more restrictive and is not a finding.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy >> "Account lockout duration" to "15" minutes or greater. A value of "0" is also acceptable, requiring an administrator to unlock the account.
References:	CCI-002238

STIG ID: WN16-AC-000020

Group ID: V-73311

Rule ID: SV-87963r2_rule

Severity: CAT II

Requirement:	Windows Server 2016 must have the number of allowed bad logon attempts configured to three or less.
Discussion:	The account lockout feature, when enabled, prevents brute-force password attacks on the system. The higher this value is, the less effective the account lockout feature will be in protecting the local system. The number of bad logon attempts must be reasonably small to minimize the possibility of a successful password attack while allowing for honest errors made during normal user logon.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy. If the "Account lockout threshold" is "0" or more than "3" attempts, this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "LockoutBadCount" equals "0" or is greater than "3" in the file, this is a finding.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy >> "Account lockout threshold" to "3" or fewer invalid logon attempts (excluding "0", which is unacceptable).
References:	CCI-000044

STIG ID: WN16-AC-000030

Group ID: V-73313

Rule ID: SV-87965r2_rule

Severity: CAT II

Requirement:	Windows Server 2016 must have the period of time before the bad logon counter is reset configured to 15 minutes or greater.
Discussion:	The account lockout feature, when enabled, prevents brute-force password attacks on the system. This parameter specifies the period of time that must pass after failed logon attempts before the counter is reset to "0". The smaller this value is, the less effective the account lockout feature will be in protecting the local system. Satisfies: SRG-OS-000021-GPOS-00005, SRG-OS-000329-GPOS-00128
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy. If the "Reset account lockout counter after" value is less than "15" minutes, this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "ResetLockoutCount" is less than "15" in the file, this is a finding.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy >> "Reset account lockout counter after" to at least "15" minutes.
References:	CCI-000044 CCI-002238

STIG ID: WN16-AC-000040

Group ID: V-73315

Rule ID: SV-87967r2_rule

Severity: CAT II

Requirement:	Windows Server 2016 password history must be configured to 24 passwords remembered.
Discussion:	A system is more vulnerable to unauthorized access when system users recycle the same password several times without being required to change to a unique password on a regularly scheduled basis. This enables users to effectively negate the purpose of mandating periodic password changes. The default value is "24" for Windows domain systems. DoD has decided this is the appropriate value for all Windows systems.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy. If the value for "Enforce password history" is less than "24" passwords remembered, this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "PasswordHistorySize" is less than "24" in the file, this is a finding.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy >> "Enforce password history" to "24" passwords remembered.
References:	CCI-000200

STIG ID: WN16-AC-000050

Group ID: V-73317

Rule ID: SV-87969r2_rule

Severity: CAT II

Requirement:	Windows Server 2016 maximum password age must be configured to 60 days or less.
Discussion:	The longer a password is in use, the greater the opportunity for someone to gain unauthorized knowledge of the passwords. Scheduled changing of passwords hinders the ability of unauthorized system users to crack passwords and gain access to a system.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy. If the value for the "Maximum password age" is greater than "60" days, this is a finding. If the value is set to "0" (never expires), this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "MaximumPasswordAge" is greater than "60" or equal to "0" in the file, this is a finding.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy >> "Maximum password age" to "60" days or less (excluding "0", which is unacceptable).
References:	CCI-000199

STIG ID: WN16-AC-000060

Group ID: V-73319

Rule ID: SV-87971r2_rule

Severity: CAT II

Requirement:	Windows Server 2016 minimum password age must be configured to at least one day.
Discussion:	Permitting passwords to be changed in immediate succession within the same day allows users to cycle passwords through their history database. This enables users to effectively negate the purpose of mandating periodic password changes.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy. If the value for the "Minimum password age" is set to "0" days ("Password can be changed immediately"), this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "MinimumPasswordAge" equals "0" in the file, this is a finding.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy >> "Minimum password age" to at least "1" day.
References:	CCI-000198

STIG ID: WN16-AC-000070

Group ID: V-73321

Rule ID: SV-87973r2_rule

Severity: CAT II

Requirement:	Windows Server 2016 minimum password length must be configured to 14 characters.
Discussion:	Information systems not protected with strong password schemes (including passwords of minimum length) provide the opportunity for anyone to crack the password, thus gaining access to the system and compromising the device, information, or the local network.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy. If the value for the "Minimum password length," is less than "14" characters, this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "MinimumPasswordLength" is less than "14" in the file, this is a finding.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy >> "Minimum password length" to "14" characters.
References:	CCI-000205

STIG ID: WN16-AC-000080

Group ID: V-73323

Rule ID: SV-87975r2_rule

Severity: CAT II

Requirement:	Windows Server 2016 must have the built-in Windows password complexity policy enabled.
Discussion:	The use of complex passwords increases their strength against attack. The built-in Windows password complexity policy requires passwords to contain at least three of the four types of characters (numbers, upper- and lower-case letters, and special characters) and prevents the inclusion of user names or parts of user names. Satisfies: SRG-OS-000069-GPOS-00037, SRG-OS-000070-GPOS-00038, SRG-OS-000071-GPOS-00039, SRG-OS-000266-GPOS-00101
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy. If the value for "Password must meet complexity requirements" is not set to "Enabled", this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "PasswordComplexity" equals "0" in the file, this is a finding. Note: If an external password filter is in use that enforces all four character types and requires this setting to be set to "Disabled", this would not be considered a finding. If this setting does not affect the use of an external password filter, it must be enabled for fallback purposes.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy >> "Password must meet complexity requirements" to "Enabled".
References:	CCI-000192 CCI-000193 CCI-000194 CCI-001619

STIG ID: WN16-AC-000090

Group ID: V-73325

Rule ID: SV-87977r2_rule

Severity: CAT I

Requirement:	Windows Server 2016 reversible password encryption must be disabled.
Discussion:	Storing passwords using reversible encryption is essentially the same as storing clear-text versions of the passwords, which are easily compromised. For this reason, this policy must never be enabled.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy. If the value for "Store passwords using reversible encryption" is not set to "Disabled", this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "ClearTextPassword" equals "1" in the file, this is a finding.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy >> "Store passwords using reversible encryption" to "Disabled".
References:	CCI-000196

STIG ID: WN16-AU-000010

Group ID: V-73401

Rule ID: SV-88053r1_rule

Severity: CAT II

Requirement:	Audit records must be backed up to a different system or media than the system being audited.
Discussion:	Protection of log data includes assuring the log data is not accidentally lost or deleted. Audit information stored in one location is vulnerable to accidental or incidental deletion or alteration.
Check:	Determine if a process to back up log data to a different system or media than the system being audited has been implemented. If it has not, this is a finding.
Fix:	Establish and implement a process for backing up log data to another system or media other than the system being audited.
References:	CCI-001851

STIG ID: WN16-AU-000020

Group ID: V-73403

Rule ID: SV-88055r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must, at a minimum, off-load audit records of interconnected systems in real time and off-load standalone systems weekly.
Discussion:	Protection of log data includes assuring the log data is not accidentally lost or deleted. Audit information stored in one location is vulnerable to accidental or incidental deletion or alteration.
Check:	Verify the audit records, at a minimum, are off-loaded for interconnected systems in real time and off-loaded for standalone systems weekly. If they are not, this is a finding.
Fix:	Configure the system to, at a minimum, off-load audit records of interconnected systems in real time and off-load standalone systems weekly.
References:	CCI-001851

STIG ID: WN16-AU-000030

Group ID: V-73405

Rule ID: SV-88057r1_rule

Severity: CAT II

Requirement:	Permissions for the Application event log must prevent access by non-privileged accounts.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. The Application event log may be susceptible to tampering if proper permissions are not applied. Satisfies: SRG-OS-000057-GPOS-00027, SRG-OS-000058-GPOS-00028, SRG-OS-000059-GPOS-00029
Check:	Navigate to the Application event log file. The default location is the "%SystemRoot%\System32\winevt\Logs" folder. However, the logs may have been moved to another folder. If the permissions for the "Application.evtx" file are not as restrictive as the default permissions listed below, this is a finding. Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control
Fix:	Configure the permissions on the Application event log file (Application.evtx) to prevent access by non-privileged accounts. The default permissions listed below satisfy this requirement: Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control The default location is the "%SystemRoot%\ System32\winevt\Logs" folder. If the location of the logs has been changed, when adding Eventlog to the permissions, it must be entered as "NT Service\Eventlog".
References:	CCI-000162 CCI-000163 CCI-000164

STIG ID: WN16-AU-000040

Group ID: V-73407

Rule ID: SV-88059r1_rule

Severity: CAT II

Requirement:	Permissions for the Security event log must prevent access by non-privileged accounts.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. The Security event log may disclose sensitive information or be susceptible to tampering if proper permissions are not applied. Satisfies: SRG-OS-000057-GPOS-00027, SRG-OS-000058-GPOS-00028, SRG-OS-000059-GPOS-00029
Check:	Navigate to the Security event log file. The default location is the "%SystemRoot%\System32\winevt\Logs" folder. However, the logs may have been moved to another folder. If the permissions for the "Security.evtx" file are not as restrictive as the default permissions listed below, this is a finding. Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control
Fix:	Configure the permissions on the Security event log file (Security.evtx) to prevent access by non-privileged accounts. The default permissions listed below satisfy this requirement: Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control The default location is the "%SystemRoot%\ System32\winevt\Logs" folder. If the location of the logs has been changed, when adding Eventlog to the permissions, it must be entered as "NT Service\Eventlog".
References:	CCI-000162 CCI-000163 CCI-000164

STIG ID: WN16-AU-000050

Group ID: V-73409

Rule ID: SV-88061r1_rule

Severity: CAT II

Requirement:	Permissions for the System event log must prevent access by non-privileged accounts.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. The System event log may be susceptible to tampering if proper permissions are not applied. Satisfies: SRG-OS-000057-GPOS-00027, SRG-OS-000058-GPOS-00028, SRG-OS-000059-GPOS-00029
Check:	Navigate to the System event log file. The default location is the "%SystemRoot%\System32\winevt\Logs" folder. However, the logs may have been moved to another folder. If the permissions for the "System.evtx" file are not as restrictive as the default permissions listed below, this is a finding. Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control
Fix:	Configure the permissions on the System event log file (System.evtx) to prevent access by non-privileged accounts. The default permissions listed below satisfy this requirement: Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control The default location is the "%SystemRoot%\ System32\winevt\Logs" folder. If the location of the logs has been changed, when adding Eventlog to the permissions, it must be entered as "NT Service\Eventlog".
References:	CCI-000162 CCI-000163 CCI-000164

STIG ID: WN16-AU-000060

Group ID: V-73411

Rule ID: SV-88063r1_rule

Severity: CAT II

Requirement:	Event Viewer must be protected from unauthorized modification and deletion.
Discussion:	Protecting audit information also includes identifying and protecting the tools used to view and manipulate log data. Therefore, protecting audit tools is necessary to prevent unauthorized operation on audit information. Operating systems providing tools to interface with audit information will leverage user permissions and roles identifying the user accessing the tools and the corresponding rights the user enjoys in order to make access decisions regarding the modification or deletion of audit tools. Satisfies: SRG-OS-000257-GPOS-00098, SRG-OS-000258-GPOS-00099
Check:	Navigate to "%SystemRoot%\System32". View the permissions on "Eventvwr.exe". If any groups or accounts other than TrustedInstaller have "Full control" or "Modify" permissions, this is a finding. The default permissions below satisfy this requirement: TrustedInstaller - Full Control Administrators, SYSTEM, Users, ALL APPLICATION PACKAGES, ALL RESTRICTED APPLICATION PACKAGES - Read & Execute
Fix:	Configure the permissions on the "Eventvwr.exe" file to prevent modification by any groups or accounts other than TrustedInstaller. The default permissions listed below satisfy this requirement: TrustedInstaller - Full Control Administrators, SYSTEM, Users, ALL APPLICATION PACKAGES, ALL RESTRICTED APPLICATION PACKAGES - Read & Execute The default location is the "%SystemRoot%\ System32" folder.
References:	CCI-001494 CCI-001495

STIG ID: WN16-AU-000070

Group ID: V-73413

Rule ID: SV-88065r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Account Logon - Credential Validation successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Credential Validation records events related to validation tests on credentials for a user account logon.
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Account Logon >> Credential Validation - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Logon >> "Audit Credential Validation" with "Success" selected.
References:	CCI-000172

STIG ID: WN16-AU-000080

Group ID: V-73415

Rule ID: SV-88067r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Account Logon - Credential Validation failures.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Credential Validation records events related to validation tests on credentials for a user account logon.
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Account Logon >> Credential Validation - Failure
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Logon >> "Audit Credential Validation" with "Failure" selected.
References:	CCI-000172

STIG ID: WN16-AU-000100

Group ID: V-73419

Rule ID: SV-88071r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Account Management - Other Account Management Events successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Other Account Management Events records events such as the access of a password hash or the Password Policy Checking API being called. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000064-GPOS-00033, SRG-OS-000462-GPOS-00206, SRG-OS-000466-GPOS-00210
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Account Management >> Other Account Management Events - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Management >> "Audit Other Account Management Events" with "Success" selected.
References:	CCI-000172 CCI-002234

STIG ID: WN16-AU-000120

Group ID: V-73423

Rule ID: SV-88075r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Account Management - Security Group Management successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Security Group Management records events such as creating, deleting, or changing security groups, including changes in group members. Satisfies: SRG-OS-000004-GPOS-00004, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000476-GPOS-00221
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Account Management >> Security Group Management - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Management >> "Audit Security Group Management" with "Success" selected.
References:	CCI-000018 CCI-000172 CCI-001403 CCI-001404 CCI-001405 CCI-002130

STIG ID: WN16-AU-000140

Group ID: V-73427

Rule ID: SV-88079r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Account Management - User Account Management successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. User Account Management records events such as creating, changing, deleting, renaming, disabling, or enabling user accounts. Satisfies: SRG-OS-000004-GPOS-00004, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000476-GPOS-00221
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Account Management >> User Account Management - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Management >> "Audit User Account Management" with "Success" selected.
References:	CCI-000018 CCI-000172 CCI-001403 CCI-001404 CCI-001405 CCI-002130

STIG ID: WN16-AU-000150

Group ID: V-73429

Rule ID: SV-88081r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Account Management - User Account Management failures.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. User Account Management records events such as creating, changing, deleting, renaming, disabling, or enabling user accounts. Satisfies: SRG-OS-000004-GPOS-00004, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000476-GPOS-00221
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Account Management >> User Account Management - Failure
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Management >> "Audit User Account Management" with "Failure" selected.
References:	CCI-000018 CCI-000172 CCI-001403 CCI-001404 CCI-001405 CCI-002130

STIG ID: WN16-AU-000160

Group ID: V-73431

Rule ID: SV-88083r2_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Detailed Tracking - Plug and Play Events successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Plug and Play activity records events related to the successful connection of external devices.
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*" Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Detailed Tracking >> Plug and Play Events - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Detailed Tracking >> "Audit PNP Activity" with "Success" selected.
References:	CCI-000172

STIG ID: WN16-AU-000170

Group ID: V-73433

Rule ID: SV-88085r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Detailed Tracking - Process Creation successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Process Creation records events related to the creation of a process and the source. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000471-GPOS-00215
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Detailed Tracking >> Process Creation - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Detailed Tracking >> "Audit Process Creation" with "Success" selected.
References:	CCI-000172 CCI-002234

STIG ID: WN16-AU-000220

Group ID: V-73443

Rule ID: SV-88095r3_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Logon/Logoff - Account Lockout successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Account Lockout events can be used to identify potentially malicious logon attempts. Satisfies: SRG-OS-000240-GPOS-00090, SRG-OS-000470-GPOS-00214
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*" Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Logon/Logoff >> Account Lockout - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> "Audit Account Lockout" with "Success" selected.
References:	CCI-000172 CCI-001404

STIG ID: WN16-AU-000230

Group ID: V-73445

Rule ID: SV-88097r3_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Logon/Logoff - Account Lockout failures.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Account Lockout events can be used to identify potentially malicious logon attempts. Satisfies: SRG-OS-000240-GPOS-00090, SRG-OS-000470-GPOS-00214
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*" Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Logon/Logoff >> Account Lockout - Failure
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> "Audit Account Lockout" with "Failure" selected.
References:	CCI-000172 CCI-001404

STIG ID: WN16-AU-000240

Group ID: V-73447

Rule ID: SV-88099r2_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Logon/Logoff - Group Membership successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Group Membership records information related to the group membership of a user's logon token.
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*" Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Logon/Logoff >> Group Membership - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> "Audit Group Membership" with "Success" selected.
References:	CCI-000172

STIG ID: WN16-AU-000250

Group ID: V-73449

Rule ID: SV-88101r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Logon/Logoff - Logoff successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Logoff records user logoffs. If this is an interactive logoff, it is recorded on the local system. If it is to a network share, it is recorded on the system accessed. Satisfies: SRG-OS-000032-GPOS-00013, SRG-OS-000470-GPOS-00214, SRG-OS-000472-GPOS-00217, SRG-OS-000473-GPOS-00218, SRG-OS-000475-GPOS-00220
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Logon/Logoff >> Logoff - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> "Audit Logoff" with "Success" selected.
References:	CCI-000067 CCI-000172

STIG ID: WN16-AU-000260

Group ID: V-73451

Rule ID: SV-88103r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Logon/Logoff - Logon successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Logon records user logons. If this is an interactive logon, it is recorded on the local system. If it is to a network share, it is recorded on the system accessed. Satisfies: SRG-OS-000032-GPOS-00013, SRG-OS-000470-GPOS-00214, SRG-OS-000472-GPOS-00217, SRG-OS-000473-GPOS-00218, SRG-OS-000475-GPOS-00220
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Logon/Logoff >> Logon - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> "Audit Logon" with "Success" selected.
References:	CCI-000067 CCI-000172

STIG ID: WN16-AU-000270

Group ID: V-73453

Rule ID: SV-88105r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Logon/Logoff - Logon failures.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Logon records user logons. If this is an interactive logon, it is recorded on the local system. If it is to a network share, it is recorded on the system accessed. Satisfies: SRG-OS-000032-GPOS-00013, SRG-OS-000470-GPOS-00214, SRG-OS-000472-GPOS-00217, SRG-OS-000473-GPOS-00218, SRG-OS-000475-GPOS-00220
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Logon/Logoff >> Logon - Failure
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> "Audit Logon" with "Failure" selected.
References:	CCI-000067 CCI-000172

STIG ID: WN16-AU-000280

Group ID: V-73455

Rule ID: SV-88107r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Logon/Logoff - Special Logon successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Special Logon records special logons that have administrative privileges and can be used to elevate processes. Satisfies: SRG-OS-000470-GPOS-00214, SRG-OS-000472-GPOS-00217, SRG-OS-000473-GPOS-00218, SRG-OS-000475-GPOS-00220
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Logon/Logoff >> Special Logon - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> "Audit Special Logon" with "Success" selected.
References:	CCI-000172

STIG ID: WN16-AU-000285

Group ID: V-90359

Rule ID: SV-101009r1_rule

Severity: CAT II

Requirement:	Windows 2016 must be configured to audit Object Access - Other Object Access Events successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Auditing for other object access records events related to the management of task scheduler jobs and COM+ objects.
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration: Open "PowerShell" or a "Command Prompt" with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following: If the system does not audit the following, this is a finding. Object Access >> Other Object Access Events - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Object Access >> "Audit Other Object Access Events" with "Success" selected.
References:	CCI-000172

STIG ID: WN16-AU-000286

Group ID: V-90361

Rule ID: SV-101011r1_rule

Severity: CAT II

Requirement:	Windows 2016 must be configured to audit Object Access - Other Object Access Events failures.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Auditing for other object access records events related to the management of task scheduler jobs and COM+ objects.
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration: Open "PowerShell" or a "Command Prompt" with elevated privileges ("Run as Administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following: If the system does not audit the following, this is a finding. Object Access >> Other Object Access Events - Failure
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Object Access >> "Audit Other Object Access Events" with "Failure" selected.
References:	CCI-000172

STIG ID: WN16-AU-000290

Group ID: V-73457

Rule ID: SV-88109r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Object Access - Removable Storage successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Removable Storage auditing under Object Access records events related to access attempts on file system objects on removable storage devices.
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Object Access >> Removable Storage - Success Virtual machines or systems that use network attached storage may generate excessive audit events for secondary virtual drives or the network attached storage when this setting is enabled. This may be set to Not Configured in such cases and would not be a finding.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Object Access >> "Audit Removable Storage" with "Success" selected.
References:	CCI-000172

STIG ID: WN16-AU-000300

Group ID: V-73459

Rule ID: SV-88111r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Object Access - Removable Storage failures.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Removable Storage auditing under Object Access records events related to access attempts on file system objects on removable storage devices.
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Object Access >> Removable Storage - Failure Virtual machines or systems that use network attached storage may generate excessive audit events for secondary virtual drives or the network attached storage when this setting is enabled. This may be set to Not Configured in such cases and would not be a finding.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Object Access >> "Audit Removable Storage" with "Failure" selected.
References:	CCI-000172

STIG ID: WN16-AU-000310

Group ID: V-73461

Rule ID: SV-88113r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Policy Change - Audit Policy Change successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Policy Change records events related to changes in audit policy. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Policy Change >> Audit Policy Change - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Policy Change >> "Audit Audit Policy Change" with "Success" selected.
References:	CCI-000172 CCI-002234

STIG ID: WN16-AU-000320

Group ID: V-73463

Rule ID: SV-88115r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Policy Change - Audit Policy Change failures.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Policy Change records events related to changes in audit policy. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Policy Change >> Audit Policy Change - Failure
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Policy Change >> "Audit Audit Policy Change" with "Failure" selected.
References:	CCI-000172 CCI-002234

STIG ID: WN16-AU-000330

Group ID: V-73465

Rule ID: SV-88117r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Policy Change - Authentication Policy Change successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Authentication Policy Change records events related to changes in authentication policy, including Kerberos policy and Trust changes. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000064-GPOS-00033, SRG-OS-000462-GPOS-00206, SRG-OS-000466-GPOS-00210
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Policy Change >> Authentication Policy Change - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Policy Change >> "Audit Authentication Policy Change" with "Success" selected.
References:	CCI-000172 CCI-002234

STIG ID: WN16-AU-000340

Group ID: V-73467

Rule ID: SV-88119r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Policy Change - Authorization Policy Change successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Authorization Policy Change records events related to changes in user rights, such as "Create a token object". Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000064-GPOS-00033, SRG-OS-000462-GPOS-00206, SRG-OS-000466-GPOS-00210
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Policy Change >> Authorization Policy Change - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Policy Change >> "Audit Authorization Policy Change" with "Success" selected.
References:	CCI-000172 CCI-002234

STIG ID: WN16-AU-000350

Group ID: V-73469

Rule ID: SV-88121r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Privilege Use - Sensitive Privilege Use successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Sensitive Privilege Use records events related to use of sensitive privileges, such as "Act as part of the operating system" or "Debug programs". Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000064-GPOS-00033, SRG-OS-000462-GPOS-00206, SRG-OS-000466-GPOS-00210
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Privilege Use >> Sensitive Privilege Use - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Privilege Use >> "Audit Sensitive Privilege Use" with "Success" selected.
References:	CCI-000172 CCI-002234

STIG ID: WN16-AU-000360

Group ID: V-73471

Rule ID: SV-88123r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Privilege Use - Sensitive Privilege Use failures.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Sensitive Privilege Use records events related to use of sensitive privileges, such as "Act as part of the operating system" or "Debug programs". Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000064-GPOS-00033, SRG-OS-000462-GPOS-00206, SRG-OS-000466-GPOS-00210
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Privilege Use >> Sensitive Privilege Use - Failure
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Privilege Use >> "Audit Sensitive Privilege Use" with "Failure" selected.
References:	CCI-000172 CCI-002234

STIG ID: WN16-AU-000370

Group ID: V-73473

Rule ID: SV-88125r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit System - IPsec Driver successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. IPsec Driver records events related to the IPsec Driver, such as dropped packets. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. System >> IPsec Driver - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> "Audit IPsec Driver" with "Success" selected.
References:	CCI-000172 CCI-002234

STIG ID: WN16-AU-000380

Group ID: V-73475

Rule ID: SV-88127r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit System - IPsec Driver failures.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. IPsec Driver records events related to the IPsec Driver, such as dropped packets. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. System >> IPsec Driver - Failure
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> "Audit IPsec Driver" with "Failure" selected.
References:	CCI-000172 CCI-002234

STIG ID: WN16-AU-000390

Group ID: V-73477

Rule ID: SV-88129r3_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit System - Other System Events successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Other System Events records information related to cryptographic key operations and the Windows Firewall service. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*" Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. System >> Other System Events - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> "Audit Other System Events" with "Success" selected.
References:	CCI-000172 CCI-002234

STIG ID: WN16-AU-000400

Group ID: V-73479

Rule ID: SV-88131r3_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit System - Other System Events failures.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Other System Events records information related to cryptographic key operations and the Windows Firewall service. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. System >> Other System Events - Failure
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> "Audit Other System Events" with "Failure" selected.
References:	CCI-000172 CCI-002234

STIG ID: WN16-AU-000410

Group ID: V-73481

Rule ID: SV-88133r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit System - Security State Change successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Security State Change records events related to changes in the security state, such as startup and shutdown of the system. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. System >> Security State Change - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> "Audit Security State Change" with "Success" selected.
References:	CCI-000172 CCI-002234

STIG ID: WN16-AU-000420

Group ID: V-73483

Rule ID: SV-88135r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit System - Security System Extension successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Security System Extension records events related to extension code being loaded by the security subsystem. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. System >> Security System Extension - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> "Audit Security System Extension" with "Success" selected.
References:	CCI-000172 CCI-002234

STIG ID: WN16-AU-000440

Group ID: V-73489

Rule ID: SV-88141r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit System - System Integrity successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. System Integrity records events related to violations of integrity to the security subsystem. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000471-GPOS-00215, SRG-OS-000471-GPOS-00216, SRG-OS-000477-GPOS-00222
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. System >> System Integrity - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> "Audit System Integrity" with "Success" selected.
References:	CCI-000172 CCI-002234

STIG ID: WN16-AU-000450

Group ID: V-73491

Rule ID: SV-88143r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit System - System Integrity failures.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. System Integrity records events related to violations of integrity to the security subsystem. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000471-GPOS-00215, SRG-OS-000471-GPOS-00216, SRG-OS-000477-GPOS-00222
Check:	Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. System >> System Integrity - Failure
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> "Audit System Integrity" with "Failure" selected.
References:	CCI-000172 CCI-002234

STIG ID: WN16-CC-000010

Group ID: V-73493

Rule ID: SV-88145r1_rule

Severity: CAT II

Requirement:	The display of slide shows on the lock screen must be disabled.
Discussion:	Slide shows that are displayed on the lock screen could display sensitive information to unauthorized personnel. Turning off this feature will limit access to the information to a logged-on user.
Check:	Verify the registry value below. If it does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Personalization\ Value Name: NoLockScreenSlideshow Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Control Panel >> Personalization >> "Prevent enabling lock screen slide show" to "Enabled".
References:	CCI-000381

STIG ID: WN16-CC-000030

Group ID: V-73497

Rule ID: SV-88149r2_rule

Severity: CAT II

Requirement:	WDigest Authentication must be disabled on Windows Server 2016.
Discussion:	When the WDigest Authentication protocol is enabled, plain-text passwords are stored in the Local Security Authority Subsystem Service (LSASS), exposing them to theft. WDigest is disabled by default in Windows Server 2016. This setting ensures this is enforced.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\SecurityProviders\Wdigest\ Value Name: UseLogonCredential Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> MS Security Guide >> "WDigest Authentication (disabling may require KB2871997)" to "Disabled". This policy setting requires the installation of the SecGuide custom templates included with the STIG package. "SecGuide.admx" and " SecGuide.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.
References:	CCI-000381

STIG ID: WN16-CC-000040

Group ID: V-73499

Rule ID: SV-88151r1_rule

Severity: CAT III

Requirement:	Internet Protocol version 6 (IPv6) source routing must be configured to the highest protection level to prevent IP source routing.
Discussion:	Configuring the system to disable IPv6 source routing protects against spoofing.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\ Value Name: DisableIPSourceRouting Type: REG_DWORD Value: 0x00000002 (2)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> MSS (Legacy) >> "MSS: (DisableIPSourceRouting IPv6) IP source routing protection level (protects against packet spoofing)" to "Enabled" with "Highest protection, source routing is completely disabled" selected. This policy setting requires the installation of the MSS-Legacy custom templates included with the STIG package. "MSS-Legacy.admx" and "MSS-Legacy.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.
References:	CCI-000366

STIG ID: WN16-CC-000050

Group ID: V-73501

Rule ID: SV-88153r1_rule

Severity: CAT III

Requirement:	Source routing must be configured to the highest protection level to prevent Internet Protocol (IP) source routing.
Discussion:	Configuring the system to disable IP source routing protects against spoofing.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\ Value Name: DisableIPSourceRouting Value Type: REG_DWORD Value: 0x00000002 (2)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> MSS (Legacy) >> "MSS: (DisableIPSourceRouting) IP source routing protection level (protects against packet spoofing)" to "Enabled" with "Highest protection, source routing is completely disabled" selected. This policy setting requires the installation of the MSS-Legacy custom templates included with the STIG package. "MSS-Legacy.admx" and "MSS-Legacy.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.
References:	CCI-000366

STIG ID: WN16-CC-000060

Group ID: V-73503

Rule ID: SV-88155r1_rule

Severity: CAT III

Requirement:	Windows Server 2016 must be configured to prevent Internet Control Message Protocol (ICMP) redirects from overriding Open Shortest Path First (OSPF)-generated routes.
Discussion:	Allowing ICMP redirect of routes can lead to traffic not being routed properly. When disabled, this forces ICMP to be routed via the shortest path first.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\ Value Name: EnableICMPRedirect Value Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> MSS (Legacy) >> "MSS: (EnableICMPRedirect) Allow ICMP redirects to override OSPF generated routes" to "Disabled". This policy setting requires the installation of the MSS-Legacy custom templates included with the STIG package. "MSS-Legacy.admx" and "MSS-Legacy.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.
References:	CCI-000366

STIG ID: WN16-CC-000070

Group ID: V-73505

Rule ID: SV-88157r1_rule

Severity: CAT III

Requirement:	Windows Server 2016 must be configured to ignore NetBIOS name release requests except from WINS servers.
Discussion:	Configuring the system to ignore name release requests, except from WINS servers, prevents a denial of service (DoS) attack. The DoS consists of sending a NetBIOS name release request to the server for each entry in the server's cache, causing a response delay in the normal operation of the server's WINS resolution capability.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Netbt\Parameters\ Value Name: NoNameReleaseOnDemand Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> MSS (Legacy) >> "MSS: (NoNameReleaseOnDemand) Allow the computer to ignore NetBIOS name release requests except from WINS servers" to "Enabled". This policy setting requires the installation of the MSS-Legacy custom templates included with the STIG package. "MSS-Legacy.admx" and "MSS-Legacy.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.
References:	CCI-002385

STIG ID: WN16-CC-000080

Group ID: V-73507

Rule ID: SV-88159r1_rule

Severity: CAT II

Requirement:	Insecure logons to an SMB server must be disabled.
Discussion:	Insecure guest logons allow unauthenticated access to shared folders. Shared resources on a system must require authentication to establish proper access.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\LanmanWorkstation\ Value Name: AllowInsecureGuestAuth Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Network >> Lanman Workstation >> "Enable insecure guest logons" to "Disabled".
References:	CCI-000366

STIG ID: WN16-CC-000090

Group ID: V-73509

Rule ID: SV-88161r1_rule

Severity: CAT II

Requirement:	Hardened UNC paths must be defined to require mutual authentication and integrity for at least the \\*\SYSVOL and \\*\NETLOGON shares.
Discussion:	Additional security requirements are applied to Universal Naming Convention (UNC) paths specified in hardened UNC paths before allowing access to them. This aids in preventing tampering with or spoofing of connections to these paths.
Check:	This requirement is applicable to domain-joined systems. For standalone systems, this is NA. If the following registry values do not exist or are not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\NetworkProvider\HardenedPaths\ Value Name: \\*\NETLOGON Value Type: REG_SZ Value: RequireMutualAuthentication=1, RequireIntegrity=1 Value Name: \\*\SYSVOL Value Type: REG_SZ Value: RequireMutualAuthentication=1, RequireIntegrity=1 Additional entries would not be a finding.
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Network >> Network Provider >> "Hardened UNC Paths" to "Enabled" with at least the following configured in "Hardened UNC Paths": (click the "Show" button to display) Value Name: \\*\SYSVOL Value: RequireMutualAuthentication=1, RequireIntegrity=1 Value Name: \\*\NETLOGON Value: RequireMutualAuthentication=1, RequireIntegrity=1
References:	CCI-000366

STIG ID: WN16-CC-000100

Group ID: V-73511

Rule ID: SV-88163r1_rule

Severity: CAT II

Requirement:	Command line data must be included in process creation events.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Enabling "Include command line data for process creation events" will record the command line information with the process creation events in the log. This can provide additional detail when malware has run on a system.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\Audit\ Value Name: ProcessCreationIncludeCmdLine_Enabled Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Audit Process Creation >> "Include command line in process creation events" to "Enabled".
References:	CCI-000135

STIG ID: WN16-CC-000110

Group ID: V-73513

Rule ID: SV-88165r2_rule

Severity: CAT II

Requirement:	Windows Server 2016 virtualization-based security must be enabled with the platform security level configured to Secure Boot or Secure Boot with DMA Protection.
Discussion:	Virtualization Based Security (VBS) provides the platform for the additional security features Credential Guard and virtualization-based protection of code integrity. Secure Boot is the minimum security level, with DMA protection providing additional memory protection. DMA Protection requires a CPU that supports input/output memory management unit (IOMMU).
Check:	For standalone systems, this is NA. Current hardware and virtual environments may not support virtualization-based security features, including Credential Guard, due to specific supporting requirements, including a TPM, UEFI with Secure Boot, and the capability to run the Hyper-V feature within a virtual machine. Open "PowerShell" with elevated privileges (run as administrator). Enter the following: "Get-CimInstance -ClassName Win32_DeviceGuard -Namespace root\Microsoft\Windows\DeviceGuard" If "RequiredSecurityProperties" does not include a value of "2" indicating "Secure Boot" (e.g., "{1, 2}"), this is a finding. If "Secure Boot and DMA Protection" is configured, "3" will also be displayed in the results (e.g., "{1, 2, 3}"). If "VirtualizationBasedSecurityStatus" is not a value of "2" indicating "Running", this is a finding. Alternately: Run "System Information". Under "System Summary", verify the following: If "Device Guard Virtualization based security" does not display "Running", this is finding. If "Device Guard Required Security Properties" does not display "Base Virtualization Support, Secure Boot", this is finding. If "Secure Boot and DMA Protection" is configured, "DMA Protection" will also be displayed (e.g., "Base Virtualization Support, Secure Boot, DMA Protection"). The policy settings referenced in the Fix section will configure the following registry values. However, due to hardware requirements, the registry values alone do not ensure proper function. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\DeviceGuard\ Value Name: EnableVirtualizationBasedSecurity Value Type: REG_DWORD Value: 0x00000001 (1) Value Name: RequirePlatformSecurityFeatures Value Type: REG_DWORD Value: 0x00000001 (1) (Secure Boot only) or 0x00000003 (3) (Secure Boot and DMA Protection) A Microsoft TechNet article on Credential Guard, including system requirement details, can be found at the following link: https://technet.microsoft.com/itpro/windows/keep-secure/credential-guard
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Device Guard >> "Turn On Virtualization Based Security" to "Enabled" with "Secure Boot" or "Secure Boot and DMA Protection" selected. A Microsoft TechNet article on Credential Guard, including system requirement details, can be found at the following link: https://technet.microsoft.com/itpro/windows/keep-secure/credential-guard
References:	CCI-000366

STIG ID: WN16-CC-000140

Group ID: V-73521

Rule ID: SV-88173r1_rule

Severity: CAT II

Requirement:	Early Launch Antimalware, Boot-Start Driver Initialization Policy must prevent boot drivers identified as bad.
Discussion:	Compromised boot drivers can introduce malware prior to protection mechanisms that load after initialization. The Early Launch Antimalware driver can limit allowed drivers based on classifications determined by the malware protection application. At a minimum, drivers determined to be bad must not be allowed.
Check:	The default behavior is for Early Launch Antimalware - Boot-Start Driver Initialization policy to enforce "Good, unknown and bad but critical" (preventing "bad"). If the registry value name below does not exist, this is not a finding. If it exists and is configured with a value of "0x00000007 (7)", this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Policies\EarlyLaunch\ Value Name: DriverLoadPolicy Value Type: REG_DWORD Value: 0x00000001 (1), 0x00000003 (3), or 0x00000008 (8) (or if the Value Name does not exist) Possible values for this setting are: 8 - Good only 1 - Good and unknown 3 - Good, unknown and bad but critical 7 - All (which includes "bad" and would be a finding)
Fix:	The default behavior is for Early Launch Antimalware - Boot-Start Driver Initialization policy to enforce "Good, unknown and bad but critical" (preventing "bad"). If this needs to be corrected or a more secure setting is desired, configure the policy value for Computer Configuration >> Administrative Templates >> System >> Early Launch Antimalware >> "Boot-Start Driver Initialization Policy" to "Not Configured" or "Enabled" with any option other than "All" selected.
References:	CCI-000366

STIG ID: WN16-CC-000150

Group ID: V-73525

Rule ID: SV-88177r1_rule

Severity: CAT II

Requirement:	Group Policy objects must be reprocessed even if they have not changed.
Discussion:	Registry entries for group policy settings can potentially be changed from the required configuration. This could occur as part of troubleshooting or by a malicious process on a compromised system. Enabling this setting and then selecting the "Process even if the Group Policy objects have not changed" option ensures the policies will be reprocessed even if none have been changed. This way, any unauthorized changes are forced to match the domain-based group policy settings again.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Group Policy\{35378EAC-683F-11D2-A89A-00C04FBBCFA2}\ Value Name: NoGPOListChanges Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Group Policy >> "Configure registry policy processing" to "Enabled" with the option "Process even if the Group Policy objects have not changed" selected.
References:	CCI-000366

STIG ID: WN16-CC-000160

Group ID: V-73527

Rule ID: SV-88179r1_rule

Severity: CAT II

Requirement:	Downloading print driver packages over HTTP must be prevented.
Discussion:	Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and will prevent uncontrolled updates to the system. This setting prevents the computer from downloading print driver packages over HTTP.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows NT\Printers\ Value Name: DisableWebPnPDownload Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Internet Communication Management >> Internet Communication settings >> "Turn off downloading of print drivers over HTTP" to "Enabled".
References:	CCI-000381

STIG ID: WN16-CC-000170

Group ID: V-73529

Rule ID: SV-88181r1_rule

Severity: CAT II

Requirement:	Printing over HTTP must be prevented.
Discussion:	Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and will prevent uncontrolled updates to the system. This setting prevents the client computer from printing over HTTP, which allows the computer to print to printers on the intranet as well as the Internet.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows NT\Printers\ Value Name: DisableHTTPPrinting Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Internet Communication Management >> Internet Communication settings >> "Turn off printing over HTTP" to "Enabled".
References:	CCI-000381

STIG ID: WN16-CC-000180

Group ID: V-73531

Rule ID: SV-88185r1_rule

Severity: CAT II

Requirement:	The network selection user interface (UI) must not be displayed on the logon screen.
Discussion:	Enabling interaction with the network selection UI allows users to change connections to available networks without signing in to Windows.
Check:	Verify the registry value below. If it does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\System\ Value Name: DontDisplayNetworkSelectionUI Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Logon >> "Do not display network selection UI" to "Enabled".
References:	CCI-000381

STIG ID: WN16-CC-000210

Group ID: V-73537

Rule ID: SV-88197r1_rule

Severity: CAT II

Requirement:	Users must be prompted to authenticate when the system wakes from sleep (on battery).
Discussion:	A system that does not require authentication when resuming from sleep may provide access to unauthorized users. Authentication must always be required when accessing a system. This setting ensures users are prompted for a password when the system wakes from sleep (on battery).
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Power\PowerSettings\0e796bdb-100d-47d6-a2d5-f7d2daa51f51\ Value Name: DCSettingIndex Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Power Management >> Sleep Settings >> "Require a password when a computer wakes (on battery)" to "Enabled".
References:	CCI-000366

STIG ID: WN16-CC-000220

Group ID: V-73539

Rule ID: SV-88201r1_rule

Severity: CAT II

Requirement:	Users must be prompted to authenticate when the system wakes from sleep (plugged in).
Discussion:	A system that does not require authentication when resuming from sleep may provide access to unauthorized users. Authentication must always be required when accessing a system. This setting ensures users are prompted for a password when the system wakes from sleep (plugged in).
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Power\PowerSettings\0e796bdb-100d-47d6-a2d5-f7d2daa51f51\ Value Name: ACSettingIndex Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Power Management >> Sleep Settings >> "Require a password when a computer wakes (plugged in)" to "Enabled".
References:	CCI-000366

STIG ID: WN16-CC-000240

Group ID: V-73543

Rule ID: SV-88207r1_rule

Severity: CAT III

Requirement:	The Application Compatibility Program Inventory must be prevented from collecting data and sending the information to Microsoft.
Discussion:	Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and will prevent uncontrolled updates to the system. This setting will prevent the Program Inventory from collecting data about a system and sending the information to Microsoft.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\AppCompat\ Value Name: DisableInventory Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Application Compatibility >> "Turn off Inventory Collector" to "Enabled".
References:	CCI-000381

STIG ID: WN16-CC-000250

Group ID: V-73545

Rule ID: SV-88209r1_rule

Severity: CAT I

Requirement:	AutoPlay must be turned off for non-volume devices.
Discussion:	Allowing AutoPlay to execute may introduce malicious code to a system. AutoPlay begins reading from a drive as soon as media is inserted into the drive. As a result, the setup file of programs or music on audio media may start. This setting will disable AutoPlay for non-volume devices, such as Media Transfer Protocol (MTP) devices.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Explorer\ Value Name: NoAutoplayfornonVolume Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> AutoPlay Policies >> "Disallow Autoplay for non-volume devices" to "Enabled".
References:	CCI-001764

STIG ID: WN16-CC-000260

Group ID: V-73547

Rule ID: SV-88211r1_rule

Severity: CAT I

Requirement:	The default AutoRun behavior must be configured to prevent AutoRun commands.
Discussion:	Allowing AutoRun commands to execute may introduce malicious code to a system. Configuring this setting prevents AutoRun commands from executing.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer\ Value Name: NoAutorun Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> AutoPlay Policies >> "Set the default behavior for AutoRun" to "Enabled" with "Do not execute any autorun commands" selected.
References:	CCI-001764

STIG ID: WN16-CC-000270

Group ID: V-73549

Rule ID: SV-88213r1_rule

Severity: CAT I

Requirement:	AutoPlay must be disabled for all drives.
Discussion:	Allowing AutoPlay to execute may introduce malicious code to a system. AutoPlay begins reading from a drive as soon media is inserted into the drive. As a result, the setup file of programs or music on audio media may start. By default, AutoPlay is disabled on removable drives, such as the floppy disk drive (but not the CD-ROM drive) and on network drives. Enabling this policy disables AutoPlay on all drives.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\policies\Explorer\ Value Name: NoDriveTypeAutoRun Type: REG_DWORD Value: 0x000000ff (255)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> AutoPlay Policies >> "Turn off AutoPlay" to "Enabled" with "All Drives" selected.
References:	CCI-001764

STIG ID: WN16-CC-000280

Group ID: V-73487

Rule ID: SV-88139r1_rule

Severity: CAT II

Requirement:	Administrator accounts must not be enumerated during elevation.
Discussion:	Enumeration of administrator accounts when elevating can provide part of the logon information to an unauthorized user. This setting configures the system to always require users to type in a username and password to elevate a running application.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\CredUI\ Value Name: EnumerateAdministrators Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Credential User Interface >> "Enumerate administrator accounts on elevation" to "Disabled".
References:	CCI-001084

STIG ID: WN16-CC-000290

Group ID: V-73551

Rule ID: SV-88215r1_rule

Severity: CAT II

Requirement:	Windows Telemetry must be configured to Security or Basic.
Discussion:	Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Limiting this capability will prevent potentially sensitive information from being sent outside the enterprise. The "Security" option for Telemetry configures the lowest amount of data, effectively none outside of the Malicious Software Removal Tool (MSRT), Defender, and telemetry client settings. "Basic" sends basic diagnostic and usage data and may be required to support some Microsoft services.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\DataCollection\ Value Name: AllowTelemetry Type: REG_DWORD Value: 0x00000000 (0) (Security), 0x00000001 (1) (Basic)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Data Collection and Preview Builds>> "Allow Telemetry" to "Enabled" with "0 - Security [Enterprise Only]" or "1 - Basic" selected in "Options".
References:	CCI-000366

STIG ID: WN16-CC-000300

Group ID: V-73553

Rule ID: SV-88217r1_rule

Severity: CAT II

Requirement:	The Application event log size must be configured to 32768 KB or greater.
Discussion:	Inadequate log size will cause the log to fill up quickly. This may prevent audit events from being recorded properly and require frequent attention by administrative personnel.
Check:	If the system is configured to write events directly to an audit server, this is NA. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\EventLog\Application\ Value Name: MaxSize Type: REG_DWORD Value: 0x00008000 (32768) (or greater)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Event Log Service >> Application >> "Specify the maximum log file size (KB)" to "Enabled" with a "Maximum Log Size (KB)" of "32768" or greater.
References:	CCI-001849

STIG ID: WN16-CC-000310

Group ID: V-73555

Rule ID: SV-88219r1_rule

Severity: CAT II

Requirement:	The Security event log size must be configured to 196608 KB or greater.
Discussion:	Inadequate log size will cause the log to fill up quickly. This may prevent audit events from being recorded properly and require frequent attention by administrative personnel.
Check:	If the system is configured to write events directly to an audit server, this is NA. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\EventLog\Security\ Value Name: MaxSize Type: REG_DWORD Value: 0x00030000 (196608) (or greater)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Event Log Service >> Security >> "Specify the maximum log file size (KB)" to "Enabled" with a "Maximum Log Size (KB)" of "196608" or greater.
References:	CCI-001849

STIG ID: WN16-CC-000320

Group ID: V-73557

Rule ID: SV-88221r1_rule

Severity: CAT II

Requirement:	The System event log size must be configured to 32768 KB or greater.
Discussion:	Inadequate log size will cause the log to fill up quickly. This may prevent audit events from being recorded properly and require frequent attention by administrative personnel.
Check:	If the system is configured to write events directly to an audit server, this is NA. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\EventLog\System\ Value Name: MaxSize Type: REG_DWORD Value: 0x00008000 (32768) (or greater)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Event Log Service >> System >> "Specify the maximum log file size (KB)" to "Enabled" with a "Maximum Log Size (KB)" of "32768" or greater.
References:	CCI-001849

STIG ID: WN16-CC-000330

Group ID: V-73559

Rule ID: SV-88223r2_rule

Severity: CAT II

Requirement:	Windows Server 2016 Windows SmartScreen must be enabled.
Discussion:	Windows SmartScreen helps protect systems from programs downloaded from the internet that may be malicious. Enabling SmartScreen will warn users of potentially malicious programs.
Check:	This is applicable to unclassified systems; for other systems, this is NA. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\System\ Value Name: EnableSmartScreen Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> File Explorer >> "Configure Windows SmartScreen" to "Enabled".
References:	CCI-000381

STIG ID: WN16-CC-000340

Group ID: V-73561

Rule ID: SV-88225r1_rule

Severity: CAT II

Requirement:	Explorer Data Execution Prevention must be enabled.
Discussion:	Data Execution Prevention provides additional protection by performing checks on memory to help prevent malicious code from running. This setting will prevent Data Execution Prevention from being turned off for File Explorer.
Check:	The default behavior is for Data Execution Prevention to be turned on for File Explorer. If the registry value name below does not exist, this is not a finding. If it exists and is configured with a value of "0", this is not a finding. If it exists and is configured with a value of "1", this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Explorer\ Value Name: NoDataExecutionPrevention Value Type: REG_DWORD Value: 0x00000000 (0) (or if the Value Name does not exist)
Fix:	The default behavior is for data execution prevention to be turned on for File Explorer. If this needs to be corrected, configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> File Explorer >> "Turn off Data Execution Prevention for Explorer" to "Not Configured" or "Disabled".
References:	CCI-002824

STIG ID: WN16-CC-000350

Group ID: V-73563

Rule ID: SV-88227r1_rule

Severity: CAT III

Requirement:	Turning off File Explorer heap termination on corruption must be disabled.
Discussion:	Legacy plug-in applications may continue to function when a File Explorer session has become corrupt. Disabling this feature will prevent this.
Check:	The default behavior is for File Explorer heap termination on corruption to be enabled. If the registry Value Name below does not exist, this is not a finding. If it exists and is configured with a value of "0", this is not a finding. If it exists and is configured with a value of "1", this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Explorer\ Value Name: NoHeapTerminationOnCorruption Value Type: REG_DWORD Value: 0x00000000 (0) (or if the Value Name does not exist)
Fix:	The default behavior is for File Explorer heap termination on corruption to be disabled. If this needs to be corrected, configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> File Explorer >> "Turn off heap termination on corruption" to "Not Configured" or "Disabled".
References:	CCI-000366

STIG ID: WN16-CC-000360

Group ID: V-73565

Rule ID: SV-88229r1_rule

Severity: CAT II

Requirement:	File Explorer shell protocol must run in protected mode.
Discussion:	The shell protocol will limit the set of folders that applications can open when run in protected mode. Restricting files an application can open to a limited set of folders increases the security of Windows.
Check:	The default behavior is for shell protected mode to be turned on for File Explorer. If the registry value name below does not exist, this is not a finding. If it exists and is configured with a value of "0", this is not a finding. If it exists and is configured with a value of "1", this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer\ Value Name: PreXPSP2ShellProtocolBehavior Value Type: REG_DWORD Value: 0x00000000 (0) (or if the Value Name does not exist)
Fix:	The default behavior is for shell protected mode to be turned on for File Explorer. If this needs to be corrected, configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> File Explorer >> "Turn off shell protocol protected mode" to "Not Configured" or "Disabled".
References:	CCI-000366

STIG ID: WN16-CC-000370

Group ID: V-73567

Rule ID: SV-88231r1_rule

Severity: CAT II

Requirement:	Passwords must not be saved in the Remote Desktop Client.
Discussion:	Saving passwords in the Remote Desktop Client could allow an unauthorized user to establish a remote desktop session to another system. The system must be configured to prevent users from saving passwords in the Remote Desktop Client. Satisfies: SRG-OS-000373-GPOS-00157, SRG-OS-000373-GPOS-00156
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: DisablePasswordSaving Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Remote Desktop Services >> Remote Desktop Connection Client >> "Do not allow passwords to be saved" to "Enabled".
References:	CCI-002038

STIG ID: WN16-CC-000380

Group ID: V-73569

Rule ID: SV-88233r1_rule

Severity: CAT II

Requirement:	Local drives must be prevented from sharing with Remote Desktop Session Hosts.
Discussion:	Preventing users from sharing the local drives on their client computers with Remote Session Hosts that they access helps reduce possible exposure of sensitive data.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: fDisableCdm Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Remote Desktop Services >> Remote Desktop Session Host >> Device and Resource Redirection >> "Do not allow drive redirection" to "Enabled".
References:	CCI-001090

STIG ID: WN16-CC-000390

Group ID: V-73571

Rule ID: SV-88235r1_rule

Severity: CAT II

Requirement:	Remote Desktop Services must always prompt a client for passwords upon connection.
Discussion:	This setting controls the ability of users to supply passwords automatically as part of their remote desktop connection. Disabling this setting would allow anyone to use the stored credentials in a connection item to connect to the terminal server. Satisfies: SRG-OS-000373-GPOS-00157, SRG-OS-000373-GPOS-00156
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: fPromptForPassword Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Remote Desktop Services >> Remote Desktop Session Host >> Security >> "Always prompt for password upon connection" to "Enabled".
References:	CCI-002038

STIG ID: WN16-CC-000400

Group ID: V-73573

Rule ID: SV-88237r1_rule

Severity: CAT II

Requirement:	The Remote Desktop Session Host must require secure Remote Procedure Call (RPC) communications.
Discussion:	Allowing unsecure RPC communication exposes the system to man-in-the-middle attacks and data disclosure attacks. A man-in-the-middle attack occurs when an intruder captures packets between a client and server and modifies them before allowing the packets to be exchanged. Usually the attacker will modify the information in the packets in an attempt to cause either the client or server to reveal sensitive information.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: fEncryptRPCTraffic Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Remote Desktop Services >> Remote Desktop Session Host >> Security >> "Require secure RPC communication" to "Enabled".
References:	CCI-001453

STIG ID: WN16-CC-000410

Group ID: V-73575

Rule ID: SV-88239r1_rule

Severity: CAT II

Requirement:	Remote Desktop Services must be configured with the client connection encryption set to High Level.
Discussion:	Remote connections must be encrypted to prevent interception of data or sensitive information. Selecting "High Level" will ensure encryption of Remote Desktop Services sessions in both directions.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: MinEncryptionLevel Type: REG_DWORD Value: 0x00000003 (3)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Remote Desktop Services >> Remote Desktop Session Host >> Security >> "Set client connection encryption level" to "Enabled" with "High Level" selected.
References:	CCI-001453

STIG ID: WN16-CC-000420

Group ID: V-73577

Rule ID: SV-88241r1_rule

Severity: CAT II

Requirement:	Attachments must be prevented from being downloaded from RSS feeds.
Discussion:	Attachments from RSS feeds may not be secure. This setting will prevent attachments from being downloaded from RSS feeds.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Internet Explorer\Feeds\ Value Name: DisableEnclosureDownload Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> RSS Feeds >> "Prevent downloading of enclosures" to "Enabled".
References:	CCI-000366

STIG ID: WN16-CC-000421

Group ID: V-102623

Rule ID: SV-111573r1_rule

Severity: CAT II

Requirement:	The Windows Explorer Preview pane must be disabled for Windows Server 2016.
Discussion:	A known vulnerability in Windows could allow the execution of malicious code by either opening a compromised document or viewing it in the Windows Preview pane. Organizations must disable the Windows Preview pane and Windows Detail pane.
Check:	If the following registry values do not exist or are not configured as specified, this is a finding: Registry Hive: HKEY_CURRENT_USER Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer Value Name: NoPreviewPane Value Type: REG_DWORD Value: 1 Registry Hive: HKEY_CURRENT_USER Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer Value Name: NoReadingPane Value Type: REG_DWORD Value: 1
Fix:	Ensure the following settings are configured for Windows Server 2016 locally or applied through group policy. Configure the policy value for User Configuration >> Administrative Templates >> Windows Components >> File Explorer >> Explorer Frame Pane "Turn off Preview Pane" to "Enabled". Configure the policy value for User Configuration >> Administrative Templates >> Windows Components >> File Explorer >> Explorer Frame Pane "Turn on or off details pane" to "Enabled" and "Configure details pane" to "Always hide".
References:	CCI-000366

STIG ID: WN16-CC-000430

Group ID: V-73579

Rule ID: SV-88243r1_rule

Severity: CAT II

Requirement:	Basic authentication for RSS feeds over HTTP must not be used.
Discussion:	Basic authentication uses plain-text passwords that could be used to compromise a system. Disabling Basic authentication will reduce this potential.
Check:	The default behavior is for the Windows RSS platform to not use Basic authentication over HTTP connections. If the registry value name below does not exist, this is not a finding. If it exists and is configured with a value of "0", this is not a finding. If it exists and is configured with a value of "1", this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Internet Explorer\Feeds\ Value Name: AllowBasicAuthInClear Value Type: REG_DWORD Value: 0x00000000 (0) (or if the Value Name does not exist)
Fix:	The default behavior is for the Windows RSS platform to not use Basic authentication over HTTP connections. If this needs to be corrected, configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> RSS Feeds >> "Turn on Basic feed authentication over HTTP" to "Not Configured" or "Disabled".
References:	CCI-000381

STIG ID: WN16-CC-000440

Group ID: V-73581

Rule ID: SV-88245r1_rule

Severity: CAT II

Requirement:	Indexing of encrypted files must be turned off.
Discussion:	Indexing of encrypted files may expose sensitive data. This setting prevents encrypted files from being indexed.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Windows Search\ Value Name: AllowIndexingEncryptedStoresOrItems Value Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Search >> "Allow indexing of encrypted files" to "Disabled".
References:	CCI-000381

STIG ID: WN16-CC-000450

Group ID: V-73583

Rule ID: SV-88247r1_rule

Severity: CAT II

Requirement:	Users must be prevented from changing installation options.
Discussion:	Installation options for applications are typically controlled by administrators. This setting prevents users from changing installation options that may bypass security features.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Installer\ Value Name: EnableUserControl Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Installer >> "Allow user control over installs" to "Disabled".
References:	CCI-001812

STIG ID: WN16-CC-000460

Group ID: V-73585

Rule ID: SV-88249r1_rule

Severity: CAT I

Requirement:	The Windows Installer Always install with elevated privileges option must be disabled.
Discussion:	Standard user accounts must not be granted elevated privileges. Enabling Windows Installer to elevate privileges when installing applications can allow malicious persons and applications to gain full control of a system.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Installer\ Value Name: AlwaysInstallElevated Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Installer >> "Always install with elevated privileges" to "Disabled".
References:	CCI-001812

STIG ID: WN16-CC-000470

Group ID: V-73587

Rule ID: SV-88251r1_rule

Severity: CAT II

Requirement:	Users must be notified if a web-based program attempts to install software.
Discussion:	Web-based programs may attempt to install malicious software on a system. Ensuring users are notified if a web-based program attempts to install software allows them to refuse the installation.
Check:	The default behavior is for Internet Explorer to warn users and select whether to allow or refuse installation when a web-based program attempts to install software on the system. If the registry value name below does not exist, this is not a finding. If it exists and is configured with a value of "0", this is not a finding. If it exists and is configured with a value of "1", this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Installer\ Value Name: SafeForScripting Value Type: REG_DWORD Value: 0x00000000 (0) (or if the Value Name does not exist)
Fix:	The default behavior is for Internet Explorer to warn users and select whether to allow or refuse installation when a web-based program attempts to install software on the system. If this needs to be corrected, configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Installer >> "Prevent Internet Explorer security prompt for Windows Installer scripts" to "Not Configured" or "Disabled".
References:	CCI-000366

STIG ID: WN16-CC-000480

Group ID: V-73589

Rule ID: SV-88253r1_rule

Severity: CAT II

Requirement:	Automatically signing in the last interactive user after a system-initiated restart must be disabled.
Discussion:	Windows can be configured to automatically sign the user back in after a Windows Update restart. Some protections are in place to help ensure this is done in a secure fashion; however, disabling this will prevent the caching of credentials for this purpose and also ensure the user is aware of the restart.
Check:	Verify the registry value below. If it does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: DisableAutomaticRestartSignOn Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Logon Options >> "Sign-in last interactive user automatically after a system-initiated restart" to "Disabled".
References:	CCI-000366

STIG ID: WN16-CC-000490

Group ID: V-73591

Rule ID: SV-88255r1_rule

Severity: CAT II

Requirement:	PowerShell script block logging must be enabled.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Enabling PowerShell script block logging will record detailed information from the processing of PowerShell commands and scripts. This can provide additional detail when malware has run on a system.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\ Policies\Microsoft\Windows\PowerShell\ScriptBlockLogging\ Value Name: EnableScriptBlockLogging Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows PowerShell >> "Turn on PowerShell Script Block Logging" to "Enabled".
References:	CCI-000135

STIG ID: WN16-CC-000500

Group ID: V-73593

Rule ID: SV-88257r1_rule

Severity: CAT I

Requirement:	The Windows Remote Management (WinRM) client must not use Basic authentication.
Discussion:	Basic authentication uses plain-text passwords that could be used to compromise a system. Disabling Basic authentication will reduce this potential.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\WinRM\Client\ Value Name: AllowBasic Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Client >> "Allow Basic authentication" to "Disabled".
References:	CCI-000877

STIG ID: WN16-CC-000510

Group ID: V-73595

Rule ID: SV-88259r1_rule

Severity: CAT II

Requirement:	The Windows Remote Management (WinRM) client must not allow unencrypted traffic.
Discussion:	Unencrypted remote access to a system can allow sensitive information to be compromised. Windows remote management connections must be encrypted to prevent this. Satisfies: SRG-OS-000393-GPOS-00173, SRG-OS-000394-GPOS-00174
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\WinRM\Client\ Value Name: AllowUnencryptedTraffic Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Client >> "Allow unencrypted traffic" to "Disabled".
References:	CCI-002890 CCI-003123

STIG ID: WN16-CC-000520

Group ID: V-73597

Rule ID: SV-88261r1_rule

Severity: CAT II

Requirement:	The Windows Remote Management (WinRM) client must not use Digest authentication.
Discussion:	Digest authentication is not as strong as other options and may be subject to man-in-the-middle attacks. Disallowing Digest authentication will reduce this potential.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\WinRM\Client\ Value Name: AllowDigest Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Client >> "Disallow Digest authentication" to "Enabled".
References:	CCI-000877

STIG ID: WN16-CC-000530

Group ID: V-73599

Rule ID: SV-88263r1_rule

Severity: CAT I

Requirement:	The Windows Remote Management (WinRM) service must not use Basic authentication.
Discussion:	Basic authentication uses plain-text passwords that could be used to compromise a system. Disabling Basic authentication will reduce this potential.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\WinRM\Service\ Value Name: AllowBasic Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Service >> "Allow Basic authentication" to "Disabled".
References:	CCI-000877

STIG ID: WN16-CC-000540

Group ID: V-73601

Rule ID: SV-88265r1_rule

Severity: CAT II

Requirement:	The Windows Remote Management (WinRM) service must not allow unencrypted traffic.
Discussion:	Unencrypted remote access to a system can allow sensitive information to be compromised. Windows remote management connections must be encrypted to prevent this. Satisfies: SRG-OS-000393-GPOS-00173, SRG-OS-000394-GPOS-00174
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\WinRM\Service\ Value Name: AllowUnencryptedTraffic Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Service >> "Allow unencrypted traffic" to "Disabled".
References:	CCI-002890 CCI-003123

STIG ID: WN16-CC-000550

Group ID: V-73603

Rule ID: SV-88267r1_rule

Severity: CAT II

Requirement:	The Windows Remote Management (WinRM) service must not store RunAs credentials.
Discussion:	Storage of administrative credentials could allow unauthorized access. Disallowing the storage of RunAs credentials for Windows Remote Management will prevent them from being used with plug-ins. Satisfies: SRG-OS-000373-GPOS-00157, SRG-OS-000373-GPOS-00156
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\WinRM\Service\ Value Name: DisableRunAs Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Service >> "Disallow WinRM from storing RunAs credentials" to "Enabled".
References:	CCI-002038

STIG ID: WN16-DC-000010

Group ID: V-73219

Rule ID: SV-87871r1_rule

Severity: CAT I

Requirement:	Only administrators responsible for the domain controller must have Administrator rights on the system.
Discussion:	An account that does not have Administrator duties must not have Administrator rights. Such rights would allow the account to bypass or modify required security restrictions on that machine and make it vulnerable to attack. System administrators must log on to systems using only accounts with the minimum level of authority necessary. Standard user accounts must not be members of the built-in Administrators group.
Check:	This applies to domain controllers. A separate version applies to other systems. Review the Administrators group. Only the appropriate administrator groups or accounts responsible for administration of the system may be members of the group. Standard user accounts must not be members of the local administrator group. If prohibited accounts are members of the local administrators group, this is a finding. If the built-in Administrator account or other required administrative accounts are found on the system, this is not a finding.
Fix:	Configure the Administrators group to include only administrator groups or accounts that are responsible for the system. Remove any standard user accounts.
References:	CCI-002235

STIG ID: WN16-DC-000020

Group ID: V-73359

Rule ID: SV-88011r1_rule

Severity: CAT II

Requirement:	Kerberos user logon restrictions must be enforced.
Discussion:	This policy setting determines whether the Kerberos Key Distribution Center (KDC) validates every request for a session ticket against the user rights policy of the target computer. The policy is enabled by default, which is the most secure setting for validating that access to target resources is not circumvented. Satisfies: SRG-OS-000112-GPOS-00057, SRG-OS-000113-GPOS-00058
Check:	This applies to domain controllers. It is NA for other systems. Verify the following is configured in the Default Domain Policy. Open "Group Policy Management". Navigate to "Group Policy Objects" in the Domain being reviewed (Forest >> Domains >> Domain). Right-click on the "Default Domain Policy". Select "Edit". Navigate to Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy. If the "Enforce user logon restrictions" is not set to "Enabled", this is a finding.
Fix:	Configure the policy value in the Default Domain Policy for Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy >> "Enforce user logon restrictions" to "Enabled".
References:	CCI-001941 CCI-001942

STIG ID: WN16-DC-000030

Group ID: V-73361

Rule ID: SV-88013r1_rule

Severity: CAT II

Requirement:	The Kerberos service ticket maximum lifetime must be limited to 600 minutes or less.
Discussion:	This setting determines the maximum amount of time (in minutes) that a granted session ticket can be used to access a particular service. Session tickets are used only to authenticate new connections with servers. Ongoing operations are not interrupted if the session ticket used to authenticate the connection expires during the connection. Satisfies: SRG-OS-000112-GPOS-00057, SRG-OS-000113-GPOS-00058
Check:	This applies to domain controllers. It is NA for other systems. Verify the following is configured in the Default Domain Policy. Open "Group Policy Management". Navigate to "Group Policy Objects" in the Domain being reviewed (Forest >> Domains >> Domain). Right-click on the "Default Domain Policy". Select "Edit". Navigate to Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy. If the value for "Maximum lifetime for service ticket" is "0" or greater than "600" minutes, this is a finding.
Fix:	Configure the policy value in the Default Domain Policy for Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy >> "Maximum lifetime for service ticket" to a maximum of "600" minutes, but not "0", which equates to "Ticket doesn't expire".
References:	CCI-001941 CCI-001942

STIG ID: WN16-DC-000040

Group ID: V-73363

Rule ID: SV-88015r1_rule

Severity: CAT II

Requirement:	The Kerberos user ticket lifetime must be limited to 10 hours or less.
Discussion:	In Kerberos, there are two types of tickets: Ticket Granting Tickets (TGTs) and Service Tickets. Kerberos tickets have a limited lifetime so the time an attacker has to implement an attack is limited. This policy controls how long TGTs can be renewed. With Kerberos, the user's initial authentication to the domain controller results in a TGT, which is then used to request Service Tickets to resources. Upon startup, each computer gets a TGT before requesting a service ticket to the domain controller and any other computers it needs to access. For services that start up under a specified user account, users must always get a TGT first and then get Service Tickets to all computers and services accessed. Satisfies: SRG-OS-000112-GPOS-00057, SRG-OS-000113-GPOS-00058
Check:	This applies to domain controllers. It is NA for other systems. Verify the following is configured in the Default Domain Policy. Open "Group Policy Management". Navigate to "Group Policy Objects" in the Domain being reviewed (Forest >> Domains >> Domain). Right-click on the "Default Domain Policy". Select "Edit". Navigate to Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy. If the value for "Maximum lifetime for user ticket" is "0" or greater than "10" hours, this is a finding.
Fix:	Configure the policy value in the Default Domain Policy for Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy >> "Maximum lifetime for user ticket" to a maximum of "10" hours but not "0", which equates to "Ticket doesn't expire".
References:	CCI-001941 CCI-001942

STIG ID: WN16-DC-000050

Group ID: V-73365

Rule ID: SV-88017r1_rule

Severity: CAT II

Requirement:	The Kerberos policy user ticket renewal maximum lifetime must be limited to seven days or less.
Discussion:	This setting determines the period of time (in days) during which a user's Ticket Granting Ticket (TGT) may be renewed. This security configuration limits the amount of time an attacker has to crack the TGT and gain access. Satisfies: SRG-OS-000112-GPOS-00057, SRG-OS-000113-GPOS-00058
Check:	This applies to domain controllers. It is NA for other systems. Verify the following is configured in the Default Domain Policy. Open "Group Policy Management". Navigate to "Group Policy Objects" in the Domain being reviewed (Forest >> Domains >> Domain). Right-click on the "Default Domain Policy". Select "Edit". Navigate to Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy. If the "Maximum lifetime for user ticket renewal" is greater than "7" days, this is a finding.
Fix:	Configure the policy value in the Default Domain Policy for Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy >> "Maximum lifetime for user ticket renewal" to a maximum of "7" days or less.
References:	CCI-001941 CCI-001942

STIG ID: WN16-DC-000060

Group ID: V-73367

Rule ID: SV-88019r1_rule

Severity: CAT II

Requirement:	The computer clock synchronization tolerance must be limited to 5 minutes or less.
Discussion:	This setting determines the maximum time difference (in minutes) that Kerberos will tolerate between the time on a client's clock and the time on a server's clock while still considering the two clocks synchronous. In order to prevent replay attacks, Kerberos uses timestamps as part of its protocol definition. For timestamps to work properly, the clocks of the client and the server need to be in sync as much as possible. Satisfies: SRG-OS-000112-GPOS-00057, SRG-OS-000113-GPOS-00058
Check:	This applies to domain controllers. It is NA for other systems. Verify the following is configured in the Default Domain Policy. Open "Group Policy Management". Navigate to "Group Policy Objects" in the Domain being reviewed (Forest >> Domains >> Domain). Right-click on the "Default Domain Policy". Select "Edit". Navigate to Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy. If the "Maximum tolerance for computer clock synchronization" is greater than "5" minutes, this is a finding.
Fix:	Configure the policy value in the Default Domain Policy for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy >> "Maximum tolerance for computer clock synchronization" to a maximum of "5" minutes or less.
References:	CCI-001941 CCI-001942

STIG ID: WN16-DC-000070

Group ID: V-73369

Rule ID: SV-88021r1_rule

Severity: CAT I

Requirement:	Permissions on the Active Directory data files must only allow System and Administrators access.
Discussion:	Improper access permissions for directory data-related files could allow unauthorized users to read, modify, or delete directory data or audit trails.
Check:	This applies to domain controllers. It is NA for other systems. Run "Regedit". Navigate to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NTDS\Parameters". Note the directory locations in the values for: Database log files path DSA Database file By default, they will be \Windows\NTDS. If the locations are different, the following will need to be run for each. Open "Command Prompt (Admin)". Navigate to the NTDS directory (\Windows\NTDS by default). Run "icacls *.*". If the permissions on each file are not as restrictive as the following, this is a finding. NT AUTHORITY\SYSTEM:(I)(F) BUILTIN\Administrators:(I)(F) (I) - permission inherited from parent container (F) - full access
Fix:	Maintain the permissions on NTDS database and log files as follows: NT AUTHORITY\SYSTEM:(I)(F) BUILTIN\Administrators:(I)(F) (I) - permission inherited from parent container (F) - full access
References:	CCI-002235

STIG ID: WN16-DC-000080

Group ID: V-73371

Rule ID: SV-88023r1_rule

Severity: CAT I

Requirement:	The Active Directory SYSVOL directory must have the proper access control permissions.
Discussion:	Improper access permissions for directory data files could allow unauthorized users to read, modify, or delete directory data. The SYSVOL directory contains public files (to the domain) such as policies and logon scripts. Data in shared subdirectories are replicated to all domain controllers in a domain.
Check:	This applies to domain controllers. It is NA for other systems. Open a command prompt. Run "net share". Make note of the directory location of the SYSVOL share. By default, this will be \Windows\SYSVOL\sysvol. For this requirement, permissions will be verified at the first SYSVOL directory level. If any standard user accounts or groups have greater than "Read & execute" permissions, this is a finding. The default permissions noted below meet this requirement. Open "Command Prompt". Run "icacls c:\Windows\SYSVOL". The following results should be displayed: NT AUTHORITY\Authenticated Users:(RX) NT AUTHORITY\Authenticated Users:(OI)(CI)(IO)(GR,GE) BUILTIN\Server Operators:(RX) BUILTIN\Server Operators:(OI)(CI)(IO)(GR,GE) BUILTIN\Administrators:(M,WDAC,WO) BUILTIN\Administrators:(OI)(CI)(IO)(F) NT AUTHORITY\SYSTEM:(F) NT AUTHORITY\SYSTEM:(OI)(CI)(IO)(F) BUILTIN\Administrators:(M,WDAC,WO) CREATOR OWNER:(OI)(CI)(IO)(F) (RX) - Read & execute Run "icacls /help" to view definitions of other permission codes. Alternately, open "File Explorer". Navigate to \Windows\SYSVOL (or the directory noted previously if different). Right-click the directory and select properties. Select the "Security" tab and click "Advanced". Default permissions: C:\Windows\SYSVOL Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to Authenticated Users - Read & execute - This folder, subfolder, and files Server Operators - Read & execute- This folder, subfolder, and files Administrators - Special - This folder only (Special = Basic Permissions: all selected except Full control) CREATOR OWNER - Full control - Subfolders and files only Administrators - Full control - Subfolders and files only SYSTEM - Full control - This folder, subfolders, and files
Fix:	Maintain the permissions on the SYSVOL directory. Do not allow greater than "Read & execute" permissions for standard user accounts or groups. The defaults below meet this requirement. C:\Windows\SYSVOL Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to Authenticated Users - Read & execute - This folder, subfolder, and files Server Operators - Read & execute- This folder, subfolder, and files Administrators - Special - This folder only (Special = Basic Permissions: all selected except Full control) CREATOR OWNER - Full control - Subfolders and files only Administrators - Full control - Subfolders and files only SYSTEM - Full control - This folder, subfolders, and files
References:	CCI-002235

STIG ID: WN16-DC-000090

Group ID: V-73373

Rule ID: SV-88025r1_rule

Severity: CAT I

Requirement:	Active Directory Group Policy objects must have proper access control permissions.
Discussion:	When directory service database objects do not have appropriate access control permissions, it may be possible for malicious users to create, read, update, or delete the objects and degrade or destroy the integrity of the data. When the directory service is used for identification, authentication, or authorization functions, a compromise of the database objects could lead to a compromise of all systems relying on the directory service. For Active Directory (AD), the Group Policy objects require special attention. In a distributed administration model (i.e., help desk), Group Policy objects are more likely to have access permissions changed from the secure defaults. If inappropriate access permissions are defined for Group Policy objects, this could allow an intruder to change the security policy applied to all domain client computers (workstations and servers).
Check:	This applies to domain controllers. It is NA for other systems. Review the permissions on Group Policy objects. Open "Group Policy Management" (available from various menus or run "gpmc.msc"). Navigate to "Group Policy Objects" in the domain being reviewed (Forest >> Domains >> Domain). For each Group Policy object: Select the Group Policy object item in the left pane. Select the "Delegation" tab in the right pane. Select the "Advanced" button. Select each Group or user name. View the permissions. If any standard user accounts or groups have "Allow" permissions greater than "Read" and "Apply group policy", this is a finding. Other access permissions that allow the objects to be updated are considered findings unless specifically documented by the ISSO. The default permissions noted below satisfy this requirement. The permissions shown are at the summary level. More detailed permissions can be viewed by selecting the next "Advanced" button, the desired Permission entry, and the "Edit" button. Authenticated Users - Read, Apply group policy, Special permissions The special permissions for Authenticated Users are for Read-type Properties. If detailed permissions include any Create, Delete, Modify, or Write Permissions or Properties, this is a finding. The special permissions for the following default groups are not the focus of this requirement and may include a wide range of permissions and properties. CREATOR OWNER - Special permissions SYSTEM - Read, Write, Create all child objects, Delete all child objects, Special permissions Domain Admins - Read, Write, Create all child objects, Delete all child objects, Special permissions Enterprise Admins - Read, Write, Create all child objects, Delete all child objects, Special permissions ENTERPRISE DOMAIN CONTROLLERS - Read, Special permissions The Domain Admins and Enterprise Admins will not have the "Delete all child objects" permission on the two default Group Policy objects: Default Domain Policy and Default Domain Controllers Policy. They will have this permission on organization created Group Policy objects.
Fix:	Maintain the permissions on Group Policy objects to not allow greater than "Read" and "Apply group policy" for standard user accounts or groups. The default permissions below meet this requirement. Authenticated Users - Read, Apply group policy, Special permissions The special permissions for Authenticated Users are for Read-type Properties. CREATOR OWNER - Special permissions SYSTEM - Read, Write, Create all child objects, Delete all child objects, Special permissions Domain Admins - Read, Write, Create all child objects, Delete all child objects, Special permissions Enterprise Admins - Read, Write, Create all child objects, Delete all child objects, Special permissions ENTERPRISE DOMAIN CONTROLLERS - Read, Special permissions Document any other access permissions that allow the objects to be updated with the ISSO. The Domain Admins and Enterprise Admins will not have the "Delete all child objects" permission on the two default Group Policy objects: Default Domain Policy and Default Domain Controllers Policy. They will have this permission on created Group Policy objects.
References:	CCI-002235

STIG ID: WN16-DC-000100

Group ID: V-73375

Rule ID: SV-88027r2_rule

Severity: CAT I

Requirement:	The Active Directory Domain Controllers Organizational Unit (OU) object must have the proper access control permissions.
Discussion:	When Active Directory objects do not have appropriate access control permissions, it may be possible for malicious users to create, read, update, or delete the objects and degrade or destroy the integrity of the data. When the directory service is used for identification, authentication, or authorization functions, a compromise of the database objects could lead to a compromise of all systems that rely on the directory service. The Domain Controllers OU object requires special attention as the Domain Controllers are central to the configuration and management of the domain. Inappropriate access permissions defined for the Domain Controllers OU could allow an intruder or unauthorized personnel to make changes that could lead to the compromise of the domain.
Check:	This applies to domain controllers. It is NA for other systems. Review the permissions on the Domain Controllers OU. Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Select "Advanced Features" in the "View" menu if not previously selected. Select the "Domain Controllers" OU (folder in folder icon). Right-click and select "Properties". Select the "Security" tab. If the permissions on the Domain Controllers OU do not restrict changes to System, Domain Admins, Enterprise Admins and Administrators, this is a finding. The default permissions listed below satisfy this requirement. Domains supporting Microsoft Exchange will have additional Exchange related permissions on the Domain Controllers OU. These may include some change related permissions and are not a finding. The permissions shown are at the summary level. More detailed permissions can be viewed by selecting the "Advanced" button, the desired Permission entry, and the "View" or "Edit" button. Except where noted otherwise, the special permissions may include a wide range of permissions and properties and are acceptable for this requirement. CREATOR OWNER - Special permissions SELF - Special permissions Authenticated Users - Read, Special permissions The special permissions for Authenticated Users are Read types. If detailed permissions include any Create, Delete, Modify, or Write Permissions or Properties, this is a finding. SYSTEM - Full Control Domain Admins - Read, Write, Create all child objects, Generate resultant set of policy (logging), Generate resultant set of policy (planning), Special permissions Enterprise Admins - Full Control Key Admins - Special permissions Enterprise Key Admins - Special permissions Administrators - Read, Write, Create all child objects, Generate resultant set of policy (logging), Generate resultant set of policy (planning), Special permissions Pre-Windows 2000 Compatible Access - Special permissions The Special permissions for Pre-Windows 2000 Compatible Access are Read types. If detailed permissions include any Create, Delete, Modify, or Write Permissions or Properties, this is a finding. ENTERPRISE DOMAIN CONTROLLERS - Read, Special permissions
Fix:	Limit the permissions on the Domain Controllers OU to restrict changes to System, Domain Admins, Enterprise Admins and Administrators. The default permissions listed below satisfy this requirement. Domains supporting Microsoft Exchange will have additional Exchange related permissions on the Domain Controllers OU. These may include some change related permissions. CREATOR OWNER - Special permissions SELF - Special permissions Authenticated Users - Read, Special permissions The special permissions for Authenticated Users are Read types. SYSTEM - Full Control Domain Admins - Read, Write, Create all child objects, Generate resultant set of policy (logging), Generate resultant set of policy (planning), Special permissions Enterprise Admins - Full Control Key Admins - Special permissions Enterprise Key Admins - Special permissions Administrators - Read, Write, Create all child objects, Generate resultant set of policy (logging), Generate resultant set of policy (planning), Special permissions Pre-Windows 2000 Compatible Access - Special permissions The special permissions for Pre-Windows 2000 Compatible Access are Read types. ENTERPRISE DOMAIN CONTROLLERS - Read, Special permissions
References:	CCI-002235

STIG ID: WN16-DC-000110

Group ID: V-73377

Rule ID: SV-88029r1_rule

Severity: CAT I

Requirement:	Domain-created Active Directory Organizational Unit (OU) objects must have proper access control permissions.
Discussion:	When directory service database objects do not have appropriate access control permissions, it may be possible for malicious users to create, read, update, or delete the objects and degrade or destroy the integrity of the data. When the directory service is used for identification, authentication, or authorization functions, a compromise of the database objects could lead to a compromise of all systems that rely on the directory service. For Active Directory, the OU objects require special attention. In a distributed administration model (i.e., help desk), OU objects are more likely to have access permissions changed from the secure defaults. If inappropriate access permissions are defined for OU objects, it could allow an intruder to add or delete users in the OU. This could result in unauthorized access to data or a denial of service to authorized users.
Check:	This applies to domain controllers. It is NA for other systems. Review the permissions on domain-defined OUs. Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Ensure "Advanced Features" is selected in the "View" menu. For each OU that is defined (folder in folder icon) excluding the Domain Controllers OU: Right-click the OU and select "Properties". Select the "Security" tab. If the permissions on the OU are not at least as restrictive as those below, this is a finding. The permissions shown are at the summary level. More detailed permissions can be viewed by selecting the "Advanced" button, the desired Permission entry, and the "Edit" or "View" button. Except where noted otherwise, the special permissions may include a wide range of permissions and properties and are acceptable for this requirement. CREATOR OWNER - Special permissions Self - Special permissions Authenticated Users - Read, Special permissions The Special permissions for Authenticated Users are Read type. If detailed permissions include any Create, Delete, Modify, or Write Permissions or Properties, this is a finding. SYSTEM - Full Control Domain Admins - Full Control Enterprise Admins - Full Control Key Admins - Special permissions Enterprise Key Admins - Special permissions Administrators - Read, Write, Create all child objects, Generate resultant set of policy (logging), Generate resultant set of policy (planning), Special permissions Pre-Windows 2000 Compatible Access - Special permissions The Special permissions for Pre-Windows 2000 Compatible Access are for Read types. If detailed permissions include any Create, Delete, Modify, or Write Permissions or Properties, this is a finding. ENTERPRISE DOMAIN CONTROLLERS - Read, Special permissions If an ISSO-approved distributed administration model (help desk or other user support staff) is implemented, permissions above Read may be allowed for groups documented by the ISSO. If any OU with improper permissions includes identification or authentication data (e.g., accounts, passwords, or password hash data) used by systems to determine access control, the severity is CAT I (e.g., OUs that include user accounts, including service/application accounts). If an OU with improper permissions does not include identification and authentication data used by systems to determine access control, the severity is CAT II (e.g., Workstation, Printer OUs).
Fix:	Maintain the permissions on domain-defined OUs to be at least as restrictive as the defaults below. Document any additional permissions above Read with the ISSO if an approved distributed administration model (help desk or other user support staff) is implemented. CREATOR OWNER - Special permissions Self - Special permissions Authenticated Users - Read, Special permissions The special permissions for Authenticated Users are Read type. SYSTEM - Full Control Domain Admins - Full Control Enterprise Admins - Full Control Key Admins - Special permissions Enterprise Key Admins - Special permissions Administrators - Read, Write, Create all child objects, Generate resultant set of policy (logging), Generate resultant set of policy (planning), Special permissions Pre-Windows 2000 Compatible Access - Special permissions The special permissions for Pre-Windows 2000 Compatible Access are for Read types. ENTERPRISE DOMAIN CONTROLLERS - Read, Special permissions
References:	CCI-002235

STIG ID: WN16-DC-000120

Group ID: V-73379

Rule ID: SV-88031r1_rule

Severity: CAT II

Requirement:	Data files owned by users must be on a different logical partition from the directory server data files.
Discussion:	When directory service data files, especially for directories used for identification, authentication, or authorization, reside on the same logical partition as user-owned files, the directory service data may be more vulnerable to unauthorized access or other availability compromises. Directory service and user-owned data files sharing a partition may be configured with less restrictive permissions in order to allow access to the user data. The directory service may be vulnerable to a denial of service attack when user-owned files on a common partition are expanded to an extent preventing the directory service from acquiring more space for directory or audit data.
Check:	This applies to domain controllers. It is NA for other systems. Run "Regedit". Navigate to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NTDS\Parameters". Note the directory locations in the values for "DSA Database file". Open "Command Prompt". Enter "net share". Note the logical drive(s) or file system partition for any organization-created data shares. Ignore system shares (e.g., NETLOGON, SYSVOL, and administrative shares ending in $). User shares that are hidden (ending with $) should not be ignored. If user shares are located on the same logical partition as the directory server data files, this is a finding.
Fix:	Move shares used to store files owned by users to a different logical partition than the directory server data files.
References:	CCI-001090

STIG ID: WN16-DC-000130

Group ID: V-73381

Rule ID: SV-88033r1_rule

Severity: CAT II

Requirement:	Domain controllers must run on a machine dedicated to that function.
Discussion:	Executing application servers on the same host machine with a directory server may substantially weaken the security of the directory server. Web or database server applications usually require the addition of many programs and accounts, increasing the attack surface of the computer. Some applications require the addition of privileged accounts, providing potential sources of compromise. Some applications (such as Microsoft Exchange) may require the use of network ports or services conflicting with the directory server. In this case, non-standard ports might be selected, and this could interfere with intrusion detection or prevention services.
Check:	This applies to domain controllers, It is NA for other systems. Review the installed roles the domain controller is supporting. Start "Server Manager". Select "AD DS" in the left pane and the server name under "Servers" to the right. Select "Add (or Remove) Roles and Features" from "Tasks" in the "Roles and Features" section. (Cancel before any changes are made.) Determine if any additional server roles are installed. A basic domain controller setup will include the following: - Active Directory Domain Services - DNS Server - File and Storage Services If any roles not requiring installation on a domain controller are installed, this is a finding. A Domain Name System (DNS) server integrated with the directory server (e.g., AD-integrated DNS) is an acceptable application. However, the DNS server must comply with the DNS STIG security requirements. Run "Programs and Features". Review installed applications. If any applications are installed that are not required for the domain controller, this is a finding.
Fix:	Remove additional roles or applications such as web, database, and email from the domain controller.
References:	CCI-000381

STIG ID: WN16-DC-000140

Group ID: V-73383

Rule ID: SV-88035r1_rule

Severity: CAT II

Requirement:	Separate, NSA-approved (Type 1) cryptography must be used to protect the directory data in transit for directory service implementations at a classified confidentiality level when replication data traverses a network cleared to a lower level than the data.
Discussion:	Directory data that is not appropriately encrypted is subject to compromise. Commercial-grade encryption does not provide adequate protection when the classification level of directory data in transit is higher than the level of the network.
Check:	This applies to domain controllers. It is NA for other systems. Review the organization network diagram(s) or documentation to determine the level of classification for the network(s) over which replication data is transmitted. Determine the classification level of the Windows domain controller. If the classification level of the Windows domain controller is higher than the level of the networks, review the organization network diagram(s) and directory implementation documentation to determine if NSA-approved encryption is used to protect the replication network traffic. If the classification level of the Windows domain controller is higher than the level of the network traversed and NSA-approved encryption is not used, this is a finding.
Fix:	Configure NSA-approved (Type 1) cryptography to protect the directory data in transit for directory service implementations at a classified confidentiality level that transfer replication data through a network cleared to a lower level than the data.
References:	CCI-002450

STIG ID: WN16-DC-000150

Group ID: V-73385

Rule ID: SV-88037r1_rule

Severity: CAT I

Requirement:	Directory data (outside the root DSE) of a non-public directory must be configured to prevent anonymous access.
Discussion:	To the extent that anonymous access to directory data (outside the root DSE) is permitted, read access control of the data is effectively disabled. If other means of controlling access (such as network restrictions) are compromised, there may be nothing else to protect the confidentiality of sensitive directory data.
Check:	This applies to domain controllers. It is NA for other systems. Open "Command Prompt" (not elevated). Run "ldp.exe". From the "Connection menu", select "Bind". Clear the User, Password, and Domain fields. Select "Simple bind" for the Bind type and click "OK". Confirmation of anonymous access will be displayed at the end: res = ldap_simple_bind_s Authenticated as: 'NT AUTHORITY\ANONYMOUS LOGON' From the "Browse" menu, select "Search". In the Search dialog, enter the DN of the domain naming context (generally something like "dc=disaost,dc=mil") in the Base DN field. Clear the Attributes field and select "Run". Error messages should display related to Bind and user not authenticated. If attribute data is displayed, anonymous access is enabled to the domain naming context and this is a finding. The following network controls allow the finding severity to be downgraded to a CAT II since these measures lower the risk associated with anonymous access. Network hardware ports at the site are subject to 802.1x authentication or MAC address restrictions. Premise firewall or host restrictions prevent access to ports 389, 636, 3268, and 3269 from client hosts not explicitly identified by domain (.mil) or IP address.
Fix:	Configure directory data (outside the root DSE) of a non-public directory to prevent anonymous access. For AD, there are multiple configuration items that could enable anonymous access. Changing the access permissions on the domain naming context object (from the secure defaults) could enable anonymous access. If the check procedures indicate this is the cause, the process that was used to change the permissions should be reversed. This could have been through the Windows Support Tools ADSI Edit console (adsiedit.msc). The dsHeuristics option is used. This is addressed in check V-8555 in the AD Forest STIG.
References:	CCI-000366

STIG ID: WN16-DC-000160

Group ID: V-73387

Rule ID: SV-88039r1_rule

Severity: CAT III

Requirement:	The directory service must be configured to terminate LDAP-based network connections to the directory server after 5 minutes of inactivity.
Discussion:	The failure to terminate inactive network connections increases the risk of a successful attack on the directory server. The longer an established session is in progress, the more time an attacker has to hijack the session, implement a means to passively intercept data, or compromise any protections on client access. For example, if an attacker gains control of a client computer, an existing (already authenticated) session with the directory server could allow access to the directory. The lack of confidentiality protection in LDAP-based sessions increases exposure to this vulnerability.
Check:	This applies to domain controllers. It is NA for other systems. Open an elevated "Command Prompt" (run as administrator). Enter "ntdsutil". At the "ntdsutil:" prompt, enter "LDAP policies". At the "ldap policy:" prompt, enter "connections". At the "server connections:" prompt, enter "connect to server [host-name]" (where [host-name] is the computer name of the domain controller). At the "server connections:" prompt, enter "q". At the "ldap policy:" prompt, enter "show values". If the value for MaxConnIdleTime is greater than "300" (5 minutes) or is not specified, this is a finding. Enter "q" at the "ldap policy:" and "ntdsutil:" prompts to exit. Alternately, Dsquery can be used to display MaxConnIdleTime: Open "Command Prompt (Admin)". Enter the following command (on a single line). dsquery * "cn=Default Query Policy,cn=Query-Policies,cn=Directory Service, cn=Windows NT,cn=Services,cn=Configuration,dc=[forest-name]" -attr LDAPAdminLimits The quotes are required and dc=[forest-name] is the fully qualified LDAP name of the domain being reviewed (e.g., dc=disaost,dc=mil). If the results do not specify a "MaxConnIdleTime" or it has a value greater than "300" (5 minutes), this is a finding.
Fix:	Configure the directory service to terminate LDAP-based network connections to the directory server after 5 minutes of inactivity. Open an elevated "Command prompt" (run as administrator). Enter "ntdsutil". At the "ntdsutil:" prompt, enter "LDAP policies". At the "ldap policy:" prompt, enter "connections". At the "server connections:" prompt, enter "connect to server [host-name]" (where [host-name] is the computer name of the domain controller). At the "server connections:" prompt, enter "q". At the "ldap policy:" prompt, enter "Set MaxConnIdleTime to 300". Enter "Commit Changes" to save. Enter "Show values" to verify changes. Enter "q" at the "ldap policy:" and "ntdsutil:" prompts to exit.
References:	CCI-001133

STIG ID: WN16-DC-000170

Group ID: V-73389

Rule ID: SV-88041r2_rule

Severity: CAT II

Requirement:	Active Directory Group Policy objects must be configured with proper audit settings.
Discussion:	When inappropriate audit settings are configured for directory service database objects, it may be possible for a user or process to update the data without generating any tracking data. The impact of missing audit data is related to the type of object. A failure to capture audit data for objects used by identification, authentication, or authorization functions could degrade or eliminate the ability to track changes to access policy for systems or data. For Active Directory (AD), there are a number of critical object types in the domain naming context of the AD database for which auditing is essential. This includes Group Policy objects. Because changes to these objects can significantly impact access controls or the availability of systems, the absence of auditing data makes it impossible to identify the source of changes that impact the confidentiality, integrity, and availability of data and systems throughout an AD domain. The lack of proper auditing can result in insufficient forensic evidence needed to investigate an incident and prosecute the intruder. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Check:	This applies to domain controllers. It is NA for other systems. Review the auditing configuration for all Group Policy objects. Open "Group Policy Management" (available from various menus or run "gpmc.msc"). Navigate to "Group Policy Objects" in the domain being reviewed (Forest >> Domains >> Domain). For each Group Policy object: Select the Group Policy object item in the left pane. Select the "Delegation" tab in the right pane. Select the "Advanced" button. Select the "Advanced" button again and then the "Auditing" tab. If the audit settings for any Group Policy object are not at least as inclusive as those below, this is a finding. Type - Fail Principal - Everyone Access - Full Control Applies to - This object and all descendant objects or Descendant groupPolicyContainer objects The three Success types listed below are defaults inherited from the Parent Object. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Type - Success Principal - Everyone Access - Special (Permissions: Write all properties, Modify permissions; Properties: all "Write" type selected) Inherited from - Parent Object Applies to - Descendant groupPolicyContainer objects Two instances with the following summary information will be listed. Type - Success Principal - Everyone Access - blank (Permissions: none selected; Properties: one instance - Write gPLink, one instance - Write gPOptions) Inherited from - Parent Object Applies to - Descendant Organization Unit Objects
Fix:	Configure the audit settings for Group Policy objects to include the following. This can be done at the Policy level in Active Directory to apply to all group policies. Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Select "Advanced Features" from the "View" Menu. Navigate to [Domain] >> System >> Policies in the left panel. Right click "Policies", select "Properties". Select the "Security" tab. Select the "Advanced" button. Select the "Auditing" tab. Type - Fail Principal - Everyone Access - Full Control Applies to - This object and all descendant objects or Descendant groupPolicyContainer objects The three Success types listed below are defaults inherited from the Parent Object. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Type - Success Principal - Everyone Access - Special (Permissions: Write all properties, Modify permissions; Properties: all "Write" type selected) Inherited from - Parent Object Applies to - Descendant groupPolicyContainer objects Two instances with the following summary information will be listed. Type - Success Principal - Everyone Access - blank (Permissions: none selected; Properties: one instance - Write gPLink, one instance - Write gPOptions) Inherited from - Parent Object Applies to - Descendant Organization Unit Objects
References:	CCI-000172 CCI-002234

STIG ID: WN16-DC-000180

Group ID: V-73391

Rule ID: SV-88043r1_rule

Severity: CAT II

Requirement:	The Active Directory Domain object must be configured with proper audit settings.
Discussion:	When inappropriate audit settings are configured for directory service database objects, it may be possible for a user or process to update the data without generating any tracking data. The impact of missing audit data is related to the type of object. A failure to capture audit data for objects used by identification, authentication, or authorization functions could degrade or eliminate the ability to track changes to access policy for systems or data. For Active Directory (AD), there are a number of critical object types in the domain naming context of the AD database for which auditing is essential. This includes the Domain object. Because changes to these objects can significantly impact access controls or the availability of systems, the absence of auditing data makes it impossible to identify the source of changes that impact the confidentiality, integrity, and availability of data and systems throughout an AD domain. The lack of proper auditing can result in insufficient forensic evidence needed to investigate an incident and prosecute the intruder. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Check:	This applies to domain controllers. It is NA for other systems. Review the auditing configuration for the Domain object. Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Ensure "Advanced Features" is selected in the "View" menu. Select the domain being reviewed in the left pane. Right-click the domain name and select "Properties". Select the "Security" tab. Select the "Advanced" button and then the "Auditing" tab. If the audit settings on the Domain object are not at least as inclusive as those below, this is a finding. Type - Fail Principal - Everyone Access - Full Control Inherited from - None Applies to - This object only The success types listed below are defaults. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Various Properties selections may also exist by default. Two instances with the following summary information will be listed. Type - Success Principal - Everyone Access - (blank) Inherited from - None Applies to - Special Type - Success Principal - Domain Users Access - All extended rights Inherited from - None Applies to - This object only Type - Success Principal - Administrators Access - All extended rights Inherited from - None Applies to - This object only Type - Success Principal - Everyone Access - Special Inherited from - None Applies to - This object only (Access - Special = Permissions: Write all properties, Modify permissions, Modify owner)
Fix:	Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Ensure "Advanced Features" is selected in the "View" menu. Select the domain being reviewed in the left pane. Right-click the domain name and select "Properties". Select the "Security" tab. Select the "Advanced" button and then the "Auditing" tab. Configure the audit settings for Domain object to include the following. Type - Fail Principal - Everyone Access - Full Control Inherited from - None Applies to - This object only The success types listed below are defaults. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Various Properties selections may also exist by default. Two instances with the following summary information will be listed. Type - Success Principal - Everyone Access - (blank) Inherited from - None Applies to - Special Type - Success Principal - Domain Users Access - All extended rights Inherited from - None Applies to - This object only Type - Success Principal - Administrators Access - All extended rights Inherited from - None Applies to - This object only Type - Success Principal - Everyone Access - Special Inherited from - None Applies to - This object only (Access - Special = Permissions: Write all properties, Modify permissions, Modify owner.)
References:	CCI-000172 CCI-002234

STIG ID: WN16-DC-000190

Group ID: V-73393

Rule ID: SV-88045r1_rule

Severity: CAT II

Requirement:	The Active Directory Infrastructure object must be configured with proper audit settings.
Discussion:	When inappropriate audit settings are configured for directory service database objects, it may be possible for a user or process to update the data without generating any tracking data. The impact of missing audit data is related to the type of object. A failure to capture audit data for objects used by identification, authentication, or authorization functions could degrade or eliminate the ability to track changes to access policy for systems or data. For Active Directory (AD), there are a number of critical object types in the domain naming context of the AD database for which auditing is essential. This includes the Infrastructure object. Because changes to these objects can significantly impact access controls or the availability of systems, the absence of auditing data makes it impossible to identify the source of changes that impact the confidentiality, integrity, and availability of data and systems throughout an AD domain. The lack of proper auditing can result in insufficient forensic evidence needed to investigate an incident and prosecute the intruder. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Check:	This applies to domain controllers. It is NA for other systems. Review the auditing configuration for Infrastructure object. Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Ensure "Advanced Features" is selected in the "View" menu. Select the domain being reviewed in the left pane. Right-click the "Infrastructure" object in the right pane and select "Properties". Select the "Security" tab. Select the "Advanced" button and then the "Auditing" tab. If the audit settings on the Infrastructure object are not at least as inclusive as those below, this is a finding. Type - Fail Principal - Everyone Access - Full Control Inherited from - None The success types listed below are defaults. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Various Properties selections may also exist by default. Type - Success Principal - Everyone Access - Special Inherited from - None (Access - Special = Permissions: Write all properties, All extended rights, Change infrastructure master) Two instances with the following summary information will be listed. Type - Success Principal - Everyone Access - (blank) Inherited from - (CN of domain)
Fix:	Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Ensure "Advanced Features" is selected in the "View" menu. Select the domain being reviewed in the left pane. Right-click the "Infrastructure" object in the right pane and select "Properties". Select the "Security" tab. Select the "Advanced" button and then the "Auditing" tab. Configure the audit settings for Infrastructure object to include the following. Type - Fail Principal - Everyone Access - Full Control Inherited from - None The success types listed below are defaults. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Various Properties selections may also exist by default. Type - Success Principal - Everyone Access - Special Inherited from - None (Access - Special = Permissions: Write all properties, All extended rights, Change infrastructure master) Two instances with the following summary information will be listed. Type - Success Principal - Everyone Access - (blank) Inherited from - (CN of domain)
References:	CCI-000172 CCI-002234

STIG ID: WN16-DC-000200

Group ID: V-73395

Rule ID: SV-88047r1_rule

Severity: CAT II

Requirement:	The Active Directory Domain Controllers Organizational Unit (OU) object must be configured with proper audit settings.
Discussion:	When inappropriate audit settings are configured for directory service database objects, it may be possible for a user or process to update the data without generating any tracking data. The impact of missing audit data is related to the type of object. A failure to capture audit data for objects used by identification, authentication, or authorization functions could degrade or eliminate the ability to track changes to access policy for systems or data. For Active Directory (AD), there are a number of critical object types in the domain naming context of the AD database for which auditing is essential. This includes the Domain Controller OU object. Because changes to these objects can significantly impact access controls or the availability of systems, the absence of auditing data makes it impossible to identify the source of changes that impact the confidentiality, integrity, and availability of data and systems throughout an AD domain. The lack of proper auditing can result in insufficient forensic evidence needed to investigate an incident and prosecute the intruder. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Check:	This applies to domain controllers. It is NA for other systems. Review the auditing configuration for the Domain Controller OU object. Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Ensure "Advanced Features" is selected in the "View" menu. Select the "Domain Controllers OU" under the domain being reviewed in the left pane. Right-click the "Domain Controllers OU" object and select "Properties". Select the "Security" tab. Select the "Advanced" button and then the "Auditing" tab. If the audit settings on the Domain Controllers OU object are not at least as inclusive as those below, this is a finding. Type - Fail Principal - Everyone Access - Full Control Inherited from - None Applies to - This object and all descendant objects The success types listed below are defaults. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Various Properties selections may also exist by default. Type - Success Principal - Everyone Access - Special Inherited from - None Applies to - This object only (Access - Special = Permissions: all create, delete and modify permissions) Type - Success Principal - Everyone Access - Write all properties Inherited from - None Applies to - This object and all descendant objects Two instances with the following summary information will be listed. Type - Success Principal - Everyone Access - (blank) Inherited from - (CN of domain) Applies to - Descendant Organizational Unit objects
Fix:	Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Ensure "Advanced Features" is selected in the "View" menu. Select the "Domain Controllers OU" under the domain being reviewed in the left pane. Right-click the "Domain Controllers OU" object and select "Properties". Select the "Security" tab. Select the "Advanced" button and then the "Auditing" tab. Configure the audit settings for Domain Controllers OU object to include the following. Type - Fail Principal - Everyone Access - Full Control Inherited from - None The success types listed below are defaults. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Various Properties selections may also exist by default. Type - Success Principal - Everyone Access - Special Inherited from - None Applies to - This object only (Access - Special = Permissions: all create, delete and modify permissions) Type - Success Principal - Everyone Access - Write all properties Inherited from - None Applies to - This object and all descendant objects Two instances with the following summary information will be listed. Type - Success Principal - Everyone Access - (blank) Inherited from - (CN of domain) Applies to - Descendant Organizational Unit objects
References:	CCI-000172 CCI-002234

STIG ID: WN16-DC-000210

Group ID: V-73397

Rule ID: SV-88049r1_rule

Severity: CAT II

Requirement:	The Active Directory AdminSDHolder object must be configured with proper audit settings.
Discussion:	When inappropriate audit settings are configured for directory service database objects, it may be possible for a user or process to update the data without generating any tracking data. The impact of missing audit data is related to the type of object. A failure to capture audit data for objects used by identification, authentication, or authorization functions could degrade or eliminate the ability to track changes to access policy for systems or data. For Active Directory (AD), there are a number of critical object types in the domain naming context of the AD database for which auditing is essential. This includes the AdminSDHolder object. Because changes to these objects can significantly impact access controls or the availability of systems, the absence of auditing data makes it impossible to identify the source of changes that impact the confidentiality, integrity, and availability of data and systems throughout an AD domain. The lack of proper auditing can result in insufficient forensic evidence needed to investigate an incident and prosecute the intruder. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Check:	This applies to domain controllers. It is NA for other systems. Review the auditing configuration for the "AdminSDHolder" object. Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Ensure "Advanced Features" is selected in the "View" menu. Select "System" under the domain being reviewed in the left pane. Right-click the "AdminSDHolder" object in the right pane and select "Properties". Select the "Security" tab. Select the "Advanced" button and then the "Auditing" tab. If the audit settings on the "AdminSDHolder" object are not at least as inclusive as those below, this is a finding. Type - Fail Principal - Everyone Access - Full Control Inherited from - None Applies to - This object only The success types listed below are defaults. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Various Properties selections may also exist by default. Type - Success Principal - Everyone Access - Special Inherited from - None Applies to - This object only (Access - Special = Write all properties, Modify permissions, Modify owner) Two instances with the following summary information will be listed. Type - Success Principal - Everyone Access - (blank) Inherited from - (CN of domain) Applies to - Descendant Organizational Unit objects
Fix:	Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Ensure "Advanced Features" is selected in the "View" menu. Select "System" under the domain being reviewed in the left pane. Right-click the "AdminSDHolder" object in the right pane and select "Properties". Select the "Security" tab. Select the "Advanced" button and then the "Auditing" tab. Configure the audit settings for AdminSDHolder object to include the following. Type - Fail Principal - Everyone Access - Full Control Inherited from - None Applies to - This object only The success types listed below are defaults. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Various Properties selections may also exist by default. Type - Success Principal - Everyone Access - Special Inherited from - None Applies to - This object only (Access - Special = Write all properties, Modify permissions, Modify owner) Two instances with the following summary information will be listed. Type - Success Principal - Everyone Access - (blank) Inherited from - (CN of domain) Applies to - Descendant Organizational Unit objects
References:	CCI-000172 CCI-002234

STIG ID: WN16-DC-000220

Group ID: V-73399

Rule ID: SV-88051r1_rule

Severity: CAT II

Requirement:	The Active Directory RID Manager$ object must be configured with proper audit settings.
Discussion:	When inappropriate audit settings are configured for directory service database objects, it may be possible for a user or process to update the data without generating any tracking data. The impact of missing audit data is related to the type of object. A failure to capture audit data for objects used by identification, authentication, or authorization functions could degrade or eliminate the ability to track changes to access policy for systems or data. For Active Directory (AD), there are a number of critical object types in the domain naming context of the AD database for which auditing is essential. This includes the RID Manager$ object. Because changes to these objects can significantly impact access controls or the availability of systems, the absence of auditing data makes it impossible to identify the source of changes that impact the confidentiality, integrity, and availability of data and systems throughout an AD domain. The lack of proper auditing can result in insufficient forensic evidence needed to investigate an incident and prosecute the intruder. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Check:	This applies to domain controllers. It is NA for other systems. Review the auditing configuration for the "RID Manager$" object. Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Ensure "Advanced Features" is selected in the "View" menu. Select "System" under the domain being reviewed in the left pane. Right-click the "RID Manager$" object in the right pane and select "Properties". Select the "Security" tab. Select the "Advanced" button and then the "Auditing" tab. If the audit settings on the "RID Manager$" object are not at least as inclusive as those below, this is a finding. Type - Fail Principal - Everyone Access - Full Control Inherited from - None The success types listed below are defaults. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Various Properties selections may also exist by default. Type - Success Principal - Everyone Access - Special Inherited from - None (Access - Special = Write all properties, All extended rights, Change RID master) Two instances with the following summary information will be listed. Type - Success Principal - Everyone Access - (blank) Inherited from - (CN of domain)
Fix:	Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Ensure "Advanced Features" is selected in the "View" menu. Select "System" under the domain being reviewed in the left pane. Right-click the "RID Manager$" object in the right pane and select "Properties". Select the "Security" tab. Select the "Advanced" button and then the "Auditing" tab. Configure the audit settings for RID Manager$ object to include the following. Type - Fail Principal - Everyone Access - Full Control Inherited from - None The success types listed below are defaults. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Various Properties selections may also exist by default. Type - Success Principal - Everyone Access - Special Inherited from - None (Access - Special = Write all properties, All extended rights, Change RID master) Two instances with the following summary information will be listed. Type - Success Principal - Everyone Access - (blank) Inherited from - (CN of domain)
References:	CCI-000172 CCI-002234

STIG ID: WN16-DC-000230

Group ID: V-73417

Rule ID: SV-88069r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit Account Management - Computer Account Management successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Computer Account Management records events such as creating, changing, deleting, renaming, disabling, or enabling computer accounts. Satisfies: SRG-OS-000004-GPOS-00004, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000476-GPOS-00221
Check:	This applies to domain controllers. It is NA for other systems. Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. Account Management >> Computer Account Management - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Management >> "Audit Computer Account Management" with "Success" selected.
References:	CCI-000018 CCI-000172 CCI-001403 CCI-001404 CCI-001405 CCI-002130

STIG ID: WN16-DC-000240

Group ID: V-73435

Rule ID: SV-88087r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit DS Access - Directory Service Access successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Directory Service Access records events related to users accessing an Active Directory object. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Check:	This applies to domain controllers. It is NA for other systems. Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. DS Access >> Directory Service Access - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> DS Access >> "Directory Service Access" with "Success" selected.
References:	CCI-000172 CCI-002234

STIG ID: WN16-DC-000250

Group ID: V-73437

Rule ID: SV-88089r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit DS Access - Directory Service Access failures.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Directory Service Access records events related to users accessing an Active Directory object. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Check:	This applies to domain controllers. It is NA for other systems. Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. DS Access >> Directory Service Access - Failure
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> DS Access >> "Directory Service Access" with "Failure" selected.
References:	CCI-000172 CCI-002234

STIG ID: WN16-DC-000260

Group ID: V-73439

Rule ID: SV-88091r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit DS Access - Directory Service Changes successes.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Directory Service Changes records events related to changes made to objects in Active Directory Domain Services. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Check:	This applies to domain controllers. It is NA for other systems. Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. DS Access >> Directory Service Changes - Success
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> DS Access >> "Directory Service Changes" with "Success" selected.
References:	CCI-000172 CCI-002234

STIG ID: WN16-DC-000270

Group ID: V-73441

Rule ID: SV-88093r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to audit DS Access - Directory Service Changes failures.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Directory Service Changes records events related to changes made to objects in Active Directory Domain Services. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212
Check:	This applies to domain controllers. It is NA for other systems. Security Option "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" must be set to "Enabled" (WN16-SO-000050) for the detailed auditing subcategories to be effective. Use the AuditPol tool to review the current Audit Policy configuration: Open an elevated "Command Prompt" (run as administrator). Enter "AuditPol /get /category:*". Compare the AuditPol settings with the following. If the system does not audit the following, this is a finding. DS Access >> Directory Service Changes - Failure
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> DS Access >> "Directory Service Changes" with "Failure" selected.
References:	CCI-000172 CCI-002234

STIG ID: WN16-DC-000280

Group ID: V-73611

Rule ID: SV-88275r1_rule

Severity: CAT II

Requirement:	Domain controllers must have a PKI server certificate.
Discussion:	Domain controllers are part of the chain of trust for PKI authentications. Without the appropriate certificate, the authenticity of the domain controller cannot be verified. Domain controllers must have a server certificate to establish authenticity as part of PKI authentications in the domain.
Check:	This applies to domain controllers. It is NA for other systems. Run "MMC". Select "Add/Remove Snap-in" from the "File" menu. Select "Certificates" in the left pane and click the "Add >" button. Select "Computer Account" and click "Next". Select the appropriate option for "Select the computer you want this snap-in to manage" and click "Finish". Click "OK". Select and expand the Certificates (Local Computer) entry in the left pane. Select and expand the Personal entry in the left pane. Select the Certificates entry in the left pane. If no certificate for the domain controller exists in the right pane, this is a finding.
Fix:	Obtain a server certificate for the domain controller.
References:	CCI-000185

STIG ID: WN16-DC-000290

Group ID: V-73613

Rule ID: SV-88277r1_rule

Severity: CAT I

Requirement:	Domain Controller PKI certificates must be issued by the DoD PKI or an approved External Certificate Authority (ECA).
Discussion:	A PKI implementation depends on the practices established by the Certificate Authority (CA) to ensure the implementation is secure. Without proper practices, the certificates issued by a CA have limited value in authentication functions. The use of multiple CAs from separate PKI implementations results in interoperability issues. If servers and clients do not have a common set of root CA certificates, they are not able to authenticate each other.
Check:	This applies to domain controllers. It is NA for other systems. Run "MMC". Select "Add/Remove Snap-in" from the "File" menu. Select "Certificates" in the left pane and click the "Add >" button. Select "Computer Account" and click "Next". Select the appropriate option for "Select the computer you want this snap-in to manage" and click "Finish". Click "OK". Select and expand the Certificates (Local Computer) entry in the left pane. Select and expand the Personal entry in the left pane. Select the Certificates entry in the left pane. In the right pane, examine the "Issued By" field for the certificate to determine the issuing CA. If the "Issued By" field of the PKI certificate being used by the domain controller does not indicate the issuing CA is part of the DoD PKI or an approved ECA, this is a finding. If the certificates in use are issued by a CA authorized by the Component's CIO, this is a CAT II finding. There are multiple sources from which lists of valid DoD CAs and approved ECAs can be obtained: The Global Directory Service (GDS) website provides an online source. The address for this site is https://crl.gds.disa.mil. DoD Public Key Enablement (PKE) Engineering Support maintains the InstallRoot utility to manage DoD supported root certificates on Windows computers, which includes a list of authorized CAs. The utility package can be downloaded from the PKI and PKE Tools page on IASE: http://iase.disa.mil/pki-pke/function_pages/tools.html
Fix:	Obtain a server certificate for the domain controller issued by the DoD PKI or an approved ECA.
References:	CCI-000185

STIG ID: WN16-DC-000300

Group ID: V-73615

Rule ID: SV-88279r2_rule

Severity: CAT I

Requirement:	PKI certificates associated with user accounts must be issued by the DoD PKI or an approved External Certificate Authority (ECA).
Discussion:	A PKI implementation depends on the practices established by the Certificate Authority (CA) to ensure the implementation is secure. Without proper practices, the certificates issued by a CA have limited value in authentication functions.
Check:	This applies to domain controllers. It is NA for other systems. Review user account mappings to PKI certificates. Open "Windows PowerShell". Enter "Get-ADUser -Filter * | FT Name, UserPrincipalName, Enabled". Exclude disabled accounts (e.g., DefaultAccount, Guest) and the krbtgt account. If the User Principal Name (UPN) is not in the format of an individual's identifier for the certificate type and for the appropriate domain suffix, this is a finding. For standard NIPRNet certificates the individual's identifier is in the format of an Electronic Data Interchange - Personnel Identifier (EDI-PI). Alt Tokens and other certificates may use a different UPN format than the EDI-PI which vary by organization. Verified these with the organization. NIPRNet Example: Name - User Principal Name User1 - 1234567890@mil See PKE documentation for other network domain suffixes. If the mappings are to certificates issued by a CA authorized by the Component's CIO, this is a CAT II finding.
Fix:	Map user accounts to PKI certificates using the appropriate User Principal Name (UPN) for the network. See PKE documentation for details.
References:	CCI-000185

STIG ID: WN16-DC-000310

Group ID: V-73617

Rule ID: SV-88281r1_rule

Severity: CAT II

Requirement:	Active Directory user accounts, including administrators, must be configured to require the use of a Common Access Card (CAC), Personal Identity Verification (PIV)-compliant hardware token, or Alternate Logon Token (ALT) for user authentication.
Discussion:	Smart cards such as the CAC support a two-factor authentication technique. This provides a higher level of trust in the asserted identity than use of the username and password for authentication. Satisfies: SRG-OS-000105-GPOS-00052, SRG-OS-000106-GPOS-00053, SRG-OS-000107-GPOS-00054, SRG-OS-000108-GPOS-00055, SRG-OS-000375-GPOS-00160
Check:	This applies to domain controllers. It is NA for other systems. Open "PowerShell". Enter the following: "Get-ADUser -Filter {(Enabled -eq $True) -and (SmartcardLogonRequired -eq $False)} | FT Name" ("DistinguishedName" may be substituted for "Name" for more detailed output.) If any user accounts, including administrators, are listed, this is a finding. Alternately: To view sample accounts in "Active Directory Users and Computers" (available from various menus or run "dsa.msc"): Select the Organizational Unit (OU) where the user accounts are located. (By default, this is the Users node; however, accounts may be under other organization-defined OUs.) Right-click the sample user account and select "Properties". Select the "Account" tab. If any user accounts, including administrators, do not have "Smart card is required for interactive logon" checked in the "Account Options" area, this is a finding.
Fix:	Configure all user accounts, including administrator accounts, in Active Directory to enable the option "Smart card is required for interactive logon". Run "Active Directory Users and Computers" (available from various menus or run "dsa.msc"): Select the OU where the user accounts are located. (By default this is the Users node; however, accounts may be under other organization-defined OUs.) Right-click the user account and select "Properties". Select the "Account" tab. Check "Smart card is required for interactive logon" in the "Account Options" area.
References:	CCI-000765 CCI-000766 CCI-000767 CCI-000768 CCI-001948

STIG ID: WN16-DC-000320

Group ID: V-73629

Rule ID: SV-88293r1_rule

Severity: CAT II

Requirement:	Domain controllers must require LDAP access signing.
Discussion:	Unsigned network traffic is susceptible to man-in-the-middle attacks, where an intruder captures packets between the server and the client and modifies them before forwarding them to the client. In the case of an LDAP server, this means that an attacker could cause a client to make decisions based on false records from the LDAP directory. The risk of an attacker pulling this off can be decreased by implementing strong physical security measures to protect the network infrastructure. Furthermore, implementing Internet Protocol security (IPsec) authentication header mode (AH), which performs mutual authentication and packet integrity for Internet Protocol (IP) traffic, can make all types of man-in-the-middle attacks extremely difficult. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188
Check:	This applies to domain controllers. It is NA for other systems. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\NTDS\Parameters\ Value Name: LDAPServerIntegrity Value Type: REG_DWORD Value: 0x00000002 (2)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Domain controller: LDAP server signing requirements" to "Require signing".
References:	CCI-002418 CCI-002421

STIG ID: WN16-DC-000330

Group ID: V-73631

Rule ID: SV-88295r1_rule

Severity: CAT II

Requirement:	Domain controllers must be configured to allow reset of machine account passwords.
Discussion:	Enabling this setting on all domain controllers in a domain prevents domain members from changing their computer account passwords. If these passwords are weak or compromised, the inability to change them may leave these computers vulnerable.
Check:	This applies to domain controllers. It is NA for other systems. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: RefusePasswordChange Value Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Domain controller: Refuse machine account password changes" to "Disabled".
References:	CCI-000366

STIG ID: WN16-DC-000340

Group ID: V-73731

Rule ID: SV-88395r3_rule

Severity: CAT II

Requirement:	The Access this computer from the network user right must only be assigned to the Administrators, Authenticated Users, and Enterprise Domain Controllers groups on domain controllers.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Access this computer from the network" right may access resources on the system, and this right must be limited to those requiring it.
Check:	This applies to domain controllers. It is NA for other systems. Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Access this computer from the network" right, this is a finding. - Administrators - Authenticated Users - Enterprise Domain Controllers For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeNetworkLogonRight" user right, this is a finding. S-1-5-32-544 (Administrators) S-1-5-11 (Authenticated Users) S-1-5-9 (Enterprise Domain Controllers) If an application requires this user right, this would not be a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the ISSO. The application account must meet requirements for application account passwords, such as length (WN16-00-000060) and required frequency of changes (WN16-00-000070).
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Access this computer from the network" to include only the following accounts or groups: - Administrators - Authenticated Users - Enterprise Domain Controllers
References:	CCI-000213

STIG ID: WN16-DC-000350

Group ID: V-73737

Rule ID: SV-88401r2_rule

Severity: CAT II

Requirement:	The Add workstations to domain user right must only be assigned to the Administrators group.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Add workstations to domain" right may add computers to a domain. This could result in unapproved or incorrectly configured systems being added to a domain.
Check:	This applies to domain controllers. It is NA for other systems. Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Add workstations to domain" right, this is a finding. - Administrators For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeMachineAccountPrivilege" user right, this is a finding. S-1-5-32-544 (Administrators)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Add workstations to domain" to include only the following accounts or groups: - Administrators
References:	CCI-002235

STIG ID: WN16-DC-000360

Group ID: V-73741

Rule ID: SV-88405r2_rule

Severity: CAT II

Requirement:	The Allow log on through Remote Desktop Services user right must only be assigned to the Administrators group.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Allow log on through Remote Desktop Services" user right can access a system through Remote Desktop.
Check:	This applies to domain controllers, it is NA for other systems. Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Allow log on through Remote Desktop Services" user right, this is a finding. - Administrators For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeRemoteInteractiveLogonRight" user right, this is a finding. S-1-5-32-544 (Administrators)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Allow log on through Remote Desktop Services" to include only the following accounts or groups: - Administrators
References:	CCI-000213

STIG ID: WN16-DC-000370

Group ID: V-73757

Rule ID: SV-88421r2_rule

Severity: CAT II

Requirement:	The Deny access to this computer from the network user right on domain controllers must be configured to prevent unauthenticated access.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny access to this computer from the network" user right defines the accounts that are prevented from logging on from the network. The Guests group must be assigned this right to prevent unauthenticated access.
Check:	This applies to domain controllers. A separate version applies to other systems. Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If the following accounts or groups are not defined for the "Deny access to this computer from the network" user right, this is a finding. - Guests Group For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If the following SIDs are not defined for the "SeDenyNetworkLogonRight" user right, this is a finding. S-1-5-32-546 (Guests)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Deny access to this computer from the network" to include the following: - Guests Group
References:	CCI-000213

STIG ID: WN16-DC-000380

Group ID: V-73761

Rule ID: SV-88425r2_rule

Severity: CAT II

Requirement:	The Deny log on as a batch job user right on domain controllers must be configured to prevent unauthenticated access.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny log on as a batch job" user right defines accounts that are prevented from logging on to the system as a batch job, such as Task Scheduler. The Guests group must be assigned to prevent unauthenticated access.
Check:	This applies to domain controllers. A separate version applies to other systems. Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If the following accounts or groups are not defined for the "Deny log on as a batch job" user right, this is a finding. - Guests Group For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If the following SID(s) are not defined for the "SeDenyBatchLogonRight" user right, this is a finding. S-1-5-32-546 (Guests)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Deny log on as a batch job" to include the following: - Guests Group
References:	CCI-000213

STIG ID: WN16-DC-000390

Group ID: V-73765

Rule ID: SV-88429r2_rule

Severity: CAT II

Requirement:	The Deny log on as a service user right must be configured to include no accounts or groups (blank) on domain controllers.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny log on as a service" user right defines accounts that are denied logon as a service. Incorrect configurations could prevent services from starting and result in a denial of service.
Check:	This applies to domain controllers. A separate version applies to other systems. Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups are defined for the "Deny log on as a service" user right, this is a finding. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs are granted the "SeDenyServiceLogonRight" user right, this is a finding.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Deny log on as a service" to include no entries (blank).
References:	CCI-000213

STIG ID: WN16-DC-000400

Group ID: V-73769

Rule ID: SV-88433r2_rule

Severity: CAT II

Requirement:	The Deny log on locally user right on domain controllers must be configured to prevent unauthenticated access.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny log on locally" user right defines accounts that are prevented from logging on interactively. The Guests group must be assigned this right to prevent unauthenticated access.
Check:	This applies to domain controllers. A separate version applies to other systems. Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If the following accounts or groups are not defined for the "Deny log on locally" user right, this is a finding. - Guests Group For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If the following SID(s) are not defined for the "SeDenyInteractiveLogonRight" user right, this is a finding. S-1-5-32-546 (Guests)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Deny log on locally" to include the following: - Guests Group
References:	CCI-000213

STIG ID: WN16-DC-000410

Group ID: V-73773

Rule ID: SV-88437r2_rule

Severity: CAT II

Requirement:	The Deny log on through Remote Desktop Services user right on domain controllers must be configured to prevent unauthenticated access.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny log on through Remote Desktop Services" user right defines the accounts that are prevented from logging on using Remote Desktop Services. The Guests group must be assigned this right to prevent unauthenticated access.
Check:	This applies to domain controllers. A separate version applies to other systems. Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If the following accounts or groups are not defined for the "Deny log on through Remote Desktop Services" user right, this is a finding. - Guests Group For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If the following SID(s) are not defined for the "SeDenyRemoteInteractiveLogonRight" user right, this is a finding. S-1-5-32-546 (Guests)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Deny log on through Remote Desktop Services" to include the following: - Guests Group
References:	CCI-002314

STIG ID: WN16-DC-000420

Group ID: V-73777

Rule ID: SV-88441r2_rule

Severity: CAT II

Requirement:	The Enable computer and user accounts to be trusted for delegation user right must only be assigned to the Administrators group on domain controllers.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Enable computer and user accounts to be trusted for delegation" user right allows the "Trusted for Delegation" setting to be changed. This could allow unauthorized users to impersonate other users.
Check:	This applies to domain controllers. A separate version applies to other systems. Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Enable computer and user accounts to be trusted for delegation" user right, this is a finding. - Administrators For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeEnableDelegationPrivilege" user right, this is a finding. S-1-5-32-544 (Administrators)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Enable computer and user accounts to be trusted for delegation" to include only the following accounts or groups: - Administrators
References:	CCI-002235

STIG ID: WN16-DC-000430

Group ID: V-91779

Rule ID: SV-101881r2_rule

Severity: CAT II

Requirement:	The password for the krbtgt account on a domain must be reset at least every 180 days.
Discussion:	The krbtgt account acts as a service account for the Kerberos Key Distribution Center (KDC) service. The account and password are created when a domain is created and the password is typically not changed. If the krbtgt account is compromised, attackers can create valid Kerberos Ticket Granting Tickets (TGT). The password must be changed twice to effectively remove the password history.Changing once, waiting for replication to complete and the amount of time equal to or greater than the maximum Kerberos ticket lifetime, and changing again reduces the risk of issues.
Check:	This requirement is applicable to domain controllers; it is NA for other systems. Open "Windows PowerShell". Enter "Get-ADUser krbtgt -Property PasswordLastSet". If the "PasswordLastSet" date is more than 180 days old, this is a finding.
Fix:	Reset the password for the krbtgt account a least every 180 days. The password must be changed twice to effectively remove the password history. Changing once, waiting for replication to complete and changing again reduces the risk of issues. Changing twice in rapid succession forces clients to re-authenticate (including application services) but is desired if a compromise is suspected. PowerShell scripts are available to accomplish this such as at the following link: https://gallery.technet.microsoft.com/Reset-the-krbtgt-account-581a9e51 Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Select "Advanced Features" in the "View" menu if not previously selected. Select the "Users" node. Right click on the krbtgt account and select "Reset password". Enter a password that meets password complexity requirements. Clear the "User must change password at next logon" check box. The system will automatically change this to a system generated complex password.
References:	CCI-000366

STIG ID: WN16-MS-000010

Group ID: V-73221

Rule ID: SV-87873r2_rule

Severity: CAT I

Requirement:	Only administrators responsible for the member server or standalone system must have Administrator rights on the system.
Discussion:	An account that does not have Administrator duties must not have Administrator rights. Such rights would allow the account to bypass or modify required security restrictions on that machine and make it vulnerable to attack. System administrators must log on to systems using only accounts with the minimum level of authority necessary. For domain-joined member servers, the Domain Admins group must be replaced by a domain member server administrator group (see V-36433 in the Active Directory Domain STIG). Restricting highly privileged accounts from the local Administrators group helps mitigate the risk of privilege escalation resulting from credential theft attacks. Standard user accounts must not be members of the built-in Administrators group.
Check:	This applies to member servers and standalone systems. A separate version applies to domain controllers. Open "Computer Management". Navigate to "Groups" under "Local Users and Groups". Review the local "Administrators" group. Only administrator groups or accounts responsible for administration of the system may be members of the group. For domain-joined member servers, the Domain Admins group must be replaced by a domain member server administrator group. Standard user accounts must not be members of the local Administrator group. If accounts that do not have responsibility for administration of the system are members of the local Administrators group, this is a finding. If the built-in Administrator account or other required administrative accounts are found on the system, this is not a finding.
Fix:	Configure the local "Administrators" group to include only administrator groups or accounts responsible for administration of the system. For domain-joined member servers, replace the Domain Admins group with a domain member server administrator group. Remove any standard user accounts.
References:	CCI-002235

STIG ID: WN16-MS-000020

Group ID: V-73495

Rule ID: SV-88147r1_rule

Severity: CAT II

Requirement:	Local administrator accounts must have their privileged token filtered to prevent elevated privileges from being used over the network on domain systems.
Discussion:	A compromised local administrator account can provide means for an attacker to move laterally between domain systems. With User Account Control enabled, filtering the privileged token for local administrator accounts will prevent the elevated privileges of these accounts from being used over the network.
Check:	This applies to member servers. For domain controllers and standalone systems, this is NA. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System Value Name: LocalAccountTokenFilterPolicy Type: REG_DWORD Value: 0x00000000 (0) This setting may cause issues with some network scanning tools if local administrative accounts are used remotely. Scans should use domain accounts where possible. If a local administrative account must be used, temporarily enabling the privileged token by configuring the registry value to "1" may be required.
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> MS Security Guide >> "Apply UAC restrictions to local accounts on network logons" to "Enabled". This policy setting requires the installation of the SecGuide custom templates included with the STIG package. "SecGuide.admx" and " SecGuide.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively.
References:	CCI-001084

STIG ID: WN16-MS-000030

Group ID: V-73533

Rule ID: SV-88187r1_rule

Severity: CAT II

Requirement:	Local users on domain-joined computers must not be enumerated.
Discussion:	The username is one part of logon credentials that could be used to gain access to a system. Preventing the enumeration of users limits this information to authorized personnel.
Check:	This applies to member servers. For domain controllers and standalone systems, this is NA. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\System\ Value Name: EnumerateLocalUsers Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Logon >> "Enumerate local users on domain-joined computers" to "Disabled".
References:	CCI-000381

STIG ID: WN16-MS-000040

Group ID: V-73541

Rule ID: SV-88203r1_rule

Severity: CAT II

Requirement:	Unauthenticated Remote Procedure Call (RPC) clients must be restricted from connecting to the RPC server.
Discussion:	Unauthenticated RPC clients may allow anonymous access to sensitive information. Configuring RPC to restrict unauthenticated RPC clients from connecting to the RPC server will prevent anonymous connections.
Check:	This applies to member servers and standalone systems, It is NA for domain controllers. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows NT\Rpc\ Value Name: RestrictRemoteClients Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Remote Procedure Call >> "Restrict Unauthenticated RPC clients" to "Enabled" with "Authenticated" selected.
References:	CCI-001967

STIG ID: WN16-MS-000050

Group ID: V-73651

Rule ID: SV-88315r1_rule

Severity: CAT II

Requirement:	Caching of logon credentials must be limited.
Discussion:	The default Windows configuration caches the last logon credentials for users who log on interactively to a system. This feature is provided for system availability reasons, such as the user's machine being disconnected from the network or domain controllers being unavailable. Even though the credential cache is well protected, if a system is attacked, an unauthorized individual may isolate the password to a domain user account using a password-cracking program and gain access to the domain.
Check:	This applies to member servers. For domain controllers and standalone systems, this is NA. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\ Value Name: CachedLogonsCount Value Type: REG_SZ Value: 4 (or less)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Interactive Logon: Number of previous logons to cache (in case Domain Controller is not available)" to "4" logons or less.
References:	CCI-000366

STIG ID: WN16-MS-000120

Group ID: V-73515

Rule ID: SV-88167r4_rule

Severity: CAT I

Requirement:	Windows Server 2016 must be running Credential Guard on domain-joined member servers.
Discussion:	Credential Guard uses virtualization-based security to protect data that could be used in credential theft attacks if compromised. This authentication information, which was stored in the Local Security Authority (LSA) in previous versions of Windows, is isolated from the rest of operating system and can only be accessed by privileged system software.
Check:	For domain controllers and standalone systems, this is NA. Current hardware and virtual environments may not support virtualization-based security features, including Credential Guard, due to specific supporting requirements, including a TPM, UEFI with Secure Boot, and the capability to run the Hyper-V feature within a virtual machine. Open "PowerShell" with elevated privileges (run as administrator). Enter the following: "Get-CimInstance -ClassName Win32_DeviceGuard -Namespace root\Microsoft\Windows\DeviceGuard" If "SecurityServicesRunning" does not include a value of "1" (e.g., "{1, 2}"), this is a finding. Alternately: Run "System Information". Under "System Summary", verify the following: If "Device Guard Security Services Running" does not list "Credential Guard", this is finding. The policy settings referenced in the Fix section will configure the following registry value. However, due to hardware requirements, the registry value alone does not ensure proper function. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\DeviceGuard\ Value Name: LsaCfgFlags Value Type: REG_DWORD Value: 0x00000001 (1) (Enabled with UEFI lock) A Microsoft article on Credential Guard system requirement can be found at the following link: https://docs.microsoft.com/en-us/windows/security/identity-protection/credential-guard/credential-guard-requirements
Fix:	Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Device Guard >> "Turn On Virtualization Based Security" to "Enabled" with "Enabled with UEFI lock" selected for "Credential Guard Configuration". A Microsoft article on Credential Guard system requirement can be found at the following link: https://docs.microsoft.com/en-us/windows/security/identity-protection/credential-guard/credential-guard-requirements
References:	CCI-000366

STIG ID: WN16-MS-000310

Group ID: V-73677

Rule ID: SV-88341r2_rule

Severity: CAT II

Requirement:	Remote calls to the Security Account Manager (SAM) must be restricted to Administrators.
Discussion:	The Windows Security Account Manager (SAM) stores users' passwords. Restricting Remote Procedure Call (RPC) connections to the SAM to Administrators helps protect those credentials.
Check:	This applies to member servers and standalone systems; it is NA for domain controllers. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\ Value Name: RestrictRemoteSAM Value Type: REG_SZ Value: O:BAG:BAD:(A;;RC;;;BA)
Fix:	Navigate to the policy Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Network access: Restrict clients allowed to make remote calls to SAM". Select "Edit Security" to configure the "Security descriptor:". Add "Administrators" in "Group or user names:" if it is not already listed (this is the default). Select "Administrators" in "Group or user names:". Select "Allow" for "Remote Access" in "Permissions for "Administrators". Click "OK". The "Security descriptor:" must be populated with "O:BAG:BAD:(A;;RC;;;BA) for the policy to be enforced.
References:	CCI-002235

STIG ID: WN16-MS-000340

Group ID: V-73733

Rule ID: SV-88397r3_rule

Severity: CAT II

Requirement:	The Access this computer from the network user right must only be assigned to the Administrators and Authenticated Users groups on member servers.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Access this computer from the network" user right may access resources on the system, and this right must be limited to those requiring it.
Check:	This applies to member servers and standalone systems. A separate version applies to domain controllers. Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Access this computer from the network" user right, this is a finding. - Administrators - Authenticated Users For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeNetworkLogonRight" user right, this is a finding. S-1-5-32-544 (Administrators) S-1-5-11 (Authenticated Users) If an application requires this user right, this would not be a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the ISSO. The application account must meet requirements for application account passwords, such as length (WN16-00-000060) and required frequency of changes (WN16-00-000070).
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Access this computer from the network" to include only the following accounts or groups: - Administrators - Authenticated Users
References:	CCI-000213

STIG ID: WN16-MS-000370

Group ID: V-73759

Rule ID: SV-88423r3_rule

Severity: CAT II

Requirement:	The Deny access to this computer from the network user right on member servers must be configured to prevent access from highly privileged domain accounts and local accounts on domain systems, and from unauthenticated access on all systems.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny access to this computer from the network" user right defines the accounts that are prevented from logging on from the network. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower-trust systems helps mitigate the risk of privilege escalation from credential theft attacks, which could lead to the compromise of an entire domain. Local accounts on domain-joined systems must also be assigned this right to decrease the risk of lateral movement resulting from credential theft attacks. The Guests group must be assigned this right to prevent unauthenticated access.
Check:	This applies to member servers and standalone systems. A separate version applies to domain controllers. Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If the following accounts or groups are not defined for the "Deny access to this computer from the network" user right, this is a finding. Domain Systems Only: - Enterprise Admins group - Domain Admins group - "Local account and member of Administrators group" or "Local account" (see Note below) All Systems: - Guests group For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If the following SIDs are not defined for the "SeDenyNetworkLogonRight" user right, this is a finding. Domain Systems Only: S-1-5-root domain-519 (Enterprise Admins) S-1-5-domain-512 (Domain Admins) S-1-5-114 ("Local account and member of Administrators group") or S-1-5-113 ("Local account") All Systems: S-1-5-32-546 (Guests) Note: These are built-in security groups. "Local account" is more restrictive but may cause issues on servers such as systems that provide failover clustering.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Deny access to this computer from the network" to include the following: Domain Systems Only: - Enterprise Admins group - Domain Admins group - "Local account and member of Administrators group" or "Local account" (see Note below) All Systems: - Guests group Note: These are built-in security groups. "Local account" is more restrictive but may cause issues on servers such as systems that provide failover clustering.
References:	CCI-000213

STIG ID: WN16-MS-000380

Group ID: V-73763

Rule ID: SV-88427r2_rule

Severity: CAT II

Requirement:	The Deny log on as a batch job user right on member servers must be configured to prevent access from highly privileged domain accounts on domain systems and from unauthenticated access on all systems.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny log on as a batch job" user right defines accounts that are prevented from logging on to the system as a batch job, such as Task Scheduler. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower-trust systems helps mitigate the risk of privilege escalation from credential theft attacks, which could lead to the compromise of an entire domain. The Guests group must be assigned to prevent unauthenticated access.
Check:	This applies to member servers and standalone systems. A separate version applies to domain controllers. Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If the following accounts or groups are not defined for the "Deny log on as a batch job" user right, this is a finding. Domain Systems Only: - Enterprise Admins Group - Domain Admins Group All Systems: - Guests Group For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If the following SIDs are not defined for the "SeDenyBatchLogonRight" user right, this is a finding. Domain Systems Only: S-1-5-root domain-519 (Enterprise Admins) S-1-5-domain-512 (Domain Admins) All Systems: S-1-5-32-546 (Guests)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Deny log on as a batch job" to include the following: Domain Systems Only: - Enterprise Admins Group - Domain Admins Group All Systems: - Guests Group
References:	CCI-000213

STIG ID: WN16-MS-000390

Group ID: V-73767

Rule ID: SV-88431r2_rule

Severity: CAT II

Requirement:	The Deny log on as a service user right on member servers must be configured to prevent access from highly privileged domain accounts on domain systems. No other groups or accounts must be assigned this right.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny log on as a service" user right defines accounts that are denied logon as a service. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower-trust systems helps mitigate the risk of privilege escalation from credential theft attacks, which could lead to the compromise of an entire domain. Incorrect configurations could prevent services from starting and result in a DoS.
Check:	This applies to member servers and standalone systems. A separate version applies to domain controllers. Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If the following accounts or groups are not defined for the "Deny log on as a service" user right on domain-joined systems, this is a finding. - Enterprise Admins Group - Domain Admins Group If any accounts or groups are defined for the "Deny log on as a service" user right on non-domain-joined systems, this is a finding. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If the following SIDs are not defined for the "SeDenyServiceLogonRight" user right on domain-joined systems, this is a finding. S-1-5-root domain-519 (Enterprise Admins) S-1-5-domain-512 (Domain Admins) If any SIDs are defined for the user right on non-domain-joined systems, this is a finding.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Deny log on as a service" to include the following: Domain systems: - Enterprise Admins Group - Domain Admins Group
References:	CCI-000213

STIG ID: WN16-MS-000400

Group ID: V-73771

Rule ID: SV-88435r3_rule

Severity: CAT II

Requirement:	The Deny log on locally user right on member servers must be configured to prevent access from highly privileged domain accounts on domain systems and from unauthenticated access on all systems.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny log on locally" user right defines accounts that are prevented from logging on interactively. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower-trust systems helps mitigate the risk of privilege escalation from credential theft attacks, which could lead to the compromise of an entire domain. The Guests group must be assigned this right to prevent unauthenticated access.
Check:	This applies to member servers and standalone systems. A separate version applies to domain controllers. Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If the following accounts or groups are not defined for the "Deny log on locally" user right, this is a finding. Domain Systems Only: - Enterprise Admins Group - Domain Admins Group All Systems: - Guests Group For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If the following SIDs are not defined for the "SeDenyInteractiveLogonRight" user right, this is a finding. Domain Systems Only: S-1-5-root domain-519 (Enterprise Admins) S-1-5-domain-512 (Domain Admins) All Systems: S-1-5-32-546 (Guests)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Deny log on locally" to include the following: Domain Systems Only: - Enterprise Admins Group - Domain Admins Group All Systems: - Guests Group
References:	CCI-000213

STIG ID: WN16-MS-000410

Group ID: V-73775

Rule ID: SV-88439r3_rule

Severity: CAT II

Requirement:	The Deny log on through Remote Desktop Services user right on member servers must be configured to prevent access from highly privileged domain accounts and all local accounts on domain systems and from unauthenticated access on all systems.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Deny log on through Remote Desktop Services" user right defines the accounts that are prevented from logging on using Remote Desktop Services. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower-trust systems helps mitigate the risk of privilege escalation from credential theft attacks, which could lead to the compromise of an entire domain. Local accounts on domain-joined systems must also be assigned this right to decrease the risk of lateral movement resulting from credential theft attacks. The Guests group must be assigned this right to prevent unauthenticated access.
Check:	This applies to member servers and standalone systems. A separate version applies to domain controllers. Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If the following accounts or groups are not defined for the "Deny log on through Remote Desktop Services" user right, this is a finding. Domain Systems Only: - Enterprise Admins group - Domain Admins group - Local account (see Note below) All Systems: - Guests group For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If the following SIDs are not defined for the "SeDenyRemoteInteractiveLogonRight" user right, this is a finding. Domain Systems Only: S-1-5-root domain-519 (Enterprise Admins) S-1-5-domain-512 (Domain Admins) S-1-5-113 ("Local account") All Systems: S-1-5-32-546 (Guests) Note: "Local account" is referring to the Windows built-in security group.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Deny log on through Remote Desktop Services" to include the following: Domain Systems Only: - Enterprise Admins group - Domain Admins group - Local account (see Note below) All Systems: - Guests group Note: "Local account" is referring to the Windows built-in security group.
References:	CCI-002314

STIG ID: WN16-MS-000420

Group ID: V-73779

Rule ID: SV-88443r2_rule

Severity: CAT II

Requirement:	The Enable computer and user accounts to be trusted for delegation user right must not be assigned to any groups or accounts on member servers.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Enable computer and user accounts to be trusted for delegation" user right allows the "Trusted for Delegation" setting to be changed. This could allow unauthorized users to impersonate other users.
Check:	This applies to member servers and standalone systems. A separate version applies to domain controllers. Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups are granted the "Enable computer and user accounts to be trusted for delegation" user right, this is a finding. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs are granted the "SeEnableDelegationPrivilege" user right, this is a finding.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Enable computer and user accounts to be trusted for delegation" to be defined but containing no entries (blank).
References:	CCI-002235

STIG ID: WN16-PK-000010

Group ID: V-73605

Rule ID: SV-88269r3_rule

Severity: CAT II

Requirement:	The DoD Root CA certificates must be installed in the Trusted Root Store.
Discussion:	To ensure secure DoD websites and DoD-signed code are properly validated, the system must trust the DoD Root Certificate Authorities (CAs). The DoD root certificates will ensure that the trust chain is established for server certificates issued from the DoD CAs. Satisfies: SRG-OS-000066-GPOS-00034, SRG-OS-000403-GPOS-00182
Check:	The certificates and thumbprints referenced below apply to unclassified systems; see PKE documentation for other networks. Open "Windows PowerShell" as an administrator. Execute the following command: Get-ChildItem -Path Cert:Localmachine\root | Where Subject -Like "*DoD*" | FL Subject, Thumbprint, NotAfter If the following certificate "Subject" and "Thumbprint" information is not displayed, this is finding. If an expired certificate ("NotAfter" date) is not listed in the results, this is not a finding. Subject: CN=DoD Root CA 2, OU=PKI, OU=DoD, O=U.S. Government, C=US Thumbprint: 8C941B34EA1EA6ED9AE2BC54CF687252B4C9B561 NotAfter: 12/5/2029 Subject: CN=DoD Root CA 3, OU=PKI, OU=DoD, O=U.S. Government, C=US Thumbprint: D73CA91102A2204A36459ED32213B467D7CE97FB NotAfter: 12/30/2029 Subject: CN=DoD Root CA 4, OU=PKI, OU=DoD, O=U.S. Government, C=US Thumbprint: B8269F25DBD937ECAFD4C35A9838571723F2D026 NotAfter: 7/25/2032 Subject: CN=DoD Root CA 5, OU=PKI, OU=DoD, O=U.S. Government, C=US Thumbprint: 4ECB5CC3095670454DA1CBD410FC921F46B8564B NotAfter: 6/14/2041 Alternately, use the Certificates MMC snap-in: Run "MMC". Select "File", "Add/Remove Snap-in". Select "Certificates" and click "Add". Select "Computer account" and click "Next". Select "Local computer: (the computer this console is running on)" and click "Finish". Click "OK". Expand "Certificates" and navigate to "Trusted Root Certification Authorities >> Certificates". For each of the DoD Root CA certificates noted below: Right-click on the certificate and select "Open". Select the "Details" Tab. Scroll to the bottom and select "Thumbprint". If the DoD Root CA certificates below are not listed or the value for the "Thumbprint" field is not as noted, this is a finding. If an expired certificate ("Valid to" date) is not listed in the results, this is not a finding. DoD Root CA 2 Thumbprint: 8C941B34EA1EA6ED9AE2BC54CF687252B4C9B561 Valid to: Wednesday, December 5, 2029 DoD Root CA 3 Thumbprint: D73CA91102A2204A36459ED32213B467D7CE97FB Valid to: Sunday, December 30, 2029 DoD Root CA 4 Thumbprint: B8269F25DBD937ECAFD4C35A9838571723F2D026 Valid to: Sunday, July 25, 2032 DoD Root CA 5 Thumbprint: 4ECB5CC3095670454DA1CBD410FC921F46B8564B Valid to: Friday, June 14, 2041
Fix:	Install the DoD Root CA certificates: DoD Root CA 2 DoD Root CA 3 DoD Root CA 4 DoD Root CA 5 The InstallRoot tool is available on IASE at http://iase.disa.mil/pki-pke/Pages/tools.aspx.
References:	CCI-000185 CCI-002470

STIG ID: WN16-PK-000020

Group ID: V-73607

Rule ID: SV-88271r3_rule

Severity: CAT II

Requirement:	The DoD Interoperability Root CA cross-certificates must be installed in the Untrusted Certificates Store on unclassified systems.
Discussion:	To ensure users do not experience denial of service when performing certificate-based authentication to DoD websites due to the system chaining to a root other than DoD Root CAs, the DoD Interoperability Root CA cross-certificates must be installed in the Untrusted Certificate Store. This requirement only applies to unclassified systems. Satisfies: SRG-OS-000066-GPOS-00034, SRG-OS-000403-GPOS-00182
Check:	Verify the DoD Interoperability cross-certificates are installed on unclassified systems as Untrusted Certificates. Run "PowerShell" as an administrator. Execute the following command: Get-ChildItem -Path Cert:Localmachine\disallowed | Where {$_.Issuer -Like "*DoD Interoperability*" -and $_.Subject -Like "*DoD*"} | FL Subject, Issuer, Thumbprint, NotAfter If the following certificate "Subject", "Issuer", and "Thumbprint", information is not displayed, this is finding. If an expired certificate ("NotAfter" date) is not listed in the results, this is not a finding. Subject: CN=DoD Root CA 2, OU=PKI, OU=DoD, O=U.S. Government, C=US Issuer: CN=DoD Interoperability Root CA 1, OU=PKI, OU=DoD, O=U.S. Government, C=US Thumbprint: 22BBE981F0694D246CC1472ED2B021DC8540A22F NotAfter: 9/6/2019 Subject: CN=DoD Root CA 3, OU=PKI, OU=DoD, O=U.S. Government, C=US Issuer: CN=DoD Interoperability Root CA 2, OU=PKI, OU=DoD, O=U.S. Government, C=US Thumbprint: AC06108CA348CC03B53795C64BF84403C1DBD341 NotAfter: 1/22/2022 Alternately use the Certificates MMC snap-in: Run "MMC". Select "File", "Add/Remove Snap-in". Select "Certificates", click "Add". Select "Computer account", click "Next". Select "Local computer: (the computer this console is running on)", click "Finish". Click "OK". Expand "Certificates" and navigate to "Untrusted Certificates >> Certificates". For each certificate with "DoD Root CA…" under "Issued To" and "DoD Interoperability Root CA…" under "Issued By": Right-click on the certificate and select "Open". Select the "Details" Tab. Scroll to the bottom and select "Thumbprint". If the certificates below are not listed or the value for the "Thumbprint" field is not as noted, this is a finding. If an expired certificate ("Valid to" date) is not listed in the results, this is not a finding. Issued To: DoD Root CA 2 Issued By: DoD Interoperability Root CA 1 Thumbprint: 22BBE981F0694D246CC1472ED2B021DC8540A22F Valid to: Friday, September 6, 2019 Issued To: DoD Root CA 3 Issued By: DoD Interoperability Root CA 2 Thumbprint: AC06108CA348CC03B53795C64BF84403C1DBD341 Valid to: Saturday, January 22, 2022
Fix:	Install the DoD Interoperability Root CA cross-certificates on unclassified systems. Issued To - Issued By - Thumbprint DoD Root CA 2 - DoD Interoperability Root CA 1 - 22BBE981F0694D246CC1472ED2B021DC8540A22F DoD Root CA 3 - DoD Interoperability Root CA 2 - AC06108CA348CC03B53795C64BF84403C1DBD341 The certificates can be installed using the InstallRoot tool. The tool and user guide are available on IASE at http://iase.disa.mil/pki-pke/Pages/tools.aspx.
References:	CCI-000185 CCI-002470

STIG ID: WN16-PK-000030

Group ID: V-73609

Rule ID: SV-88273r3_rule

Severity: CAT II

Requirement:	The US DoD CCEB Interoperability Root CA cross-certificates must be installed in the Untrusted Certificates Store on unclassified systems.
Discussion:	To ensure users do not experience denial of service when performing certificate-based authentication to DoD websites due to the system chaining to a root other than DoD Root CAs, the US DoD CCEB Interoperability Root CA cross-certificates must be installed in the Untrusted Certificate Store. This requirement only applies to unclassified systems. Satisfies: SRG-OS-000066-GPOS-00034, SRG-OS-000403-GPOS-00182
Check:	Verify the US DoD CCEB Interoperability Root CA cross-certificate is installed on unclassified systems as an Untrusted Certificate. Run "PowerShell" as an administrator. Execute the following command: Get-ChildItem -Path Cert:Localmachine\disallowed | Where Issuer -Like "*CCEB Interoperability*" | FL Subject, Issuer, Thumbprint, NotAfter If the following certificate "Subject", "Issuer", and "Thumbprint", information is not displayed, this is finding. If an expired certificate ("NotAfter" date) is not listed in the results, this is not a finding. Subject: CN=DoD Root CA 3, OU=PKI, OU=DoD, O=U.S. Government, C=US Issuer: CN=US DoD CCEB Interoperability Root CA 2, OU=PKI, OU=DoD, O=U.S. Government, C=US Thumbprint: 929BF3196896994C0A201DF4A5B71F603FEFBF2E NotAfter: 9/27/2019 Alternately use the Certificates MMC snap-in: Run "MMC". Select "File", "Add/Remove Snap-in". Select "Certificates", click "Add". Select "Computer account", click "Next". Select "Local computer: (the computer this console is running on)", click "Finish". Click "OK". Expand "Certificates" and navigate to "Untrusted Certificates >> Certificates". For each certificate with "US DoD CCEB Interoperability Root CA …" under "Issued By": Right-click on the certificate and select "Open". Select the "Details" Tab. Scroll to the bottom and select "Thumbprint". If the certificate below is not listed or the value for the "Thumbprint" field is not as noted, this is a finding. If an expired certificate ("Valid to" date) is not listed in the results, this is not a finding. Issued To: DoD Root CA 3 Issuer by: US DoD CCEB Interoperability Root CA 2 Thumbprint: 929BF3196896994C0A201DF4A5B71F603FEFBF2E Valid: Friday, September 27, 2019
Fix:	Install the US DoD CCEB Interoperability Root CA cross-certificate on unclassified systems. Issued To - Issued By - Thumbprint DoD Root CA 3 - US DoD CCEB Interoperability Root CA 2 - 929BF3196896994C0A201DF4A5B71F603FEFBF2E The certificates can be installed using the InstallRoot tool. The tool and user guide are available on IASE at http://iase.disa.mil/pki-pke/Pages/tools.aspx.
References:	CCI-000185 CCI-002470

STIG ID: WN16-SO-000010

Group ID: V-73809

Rule ID: SV-88475r2_rule

Severity: CAT II

Requirement:	Windows Server 2016 built-in guest account must be disabled.
Discussion:	A system faces an increased vulnerability threat if the built-in guest account is not disabled. This is a known account that exists on all Windows systems and cannot be deleted. This account is initialized during the installation of the operating system with no password assigned.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options. If the value for "Accounts: Guest account status" is not set to "Disabled", this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "EnableGuestAccount" equals "1" in the file, this is a finding.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Accounts: Guest account status" to "Disabled".
References:	CCI-000804

STIG ID: WN16-SO-000020

Group ID: V-73621

Rule ID: SV-88285r1_rule

Severity: CAT I

Requirement:	Local accounts with blank passwords must be restricted to prevent access from the network.
Discussion:	An account without a password can allow unauthorized access to a system as only the username would be required. Password policies should prevent accounts with blank passwords from existing on a system. However, if a local account with a blank password does exist, enabling this setting will prevent network access, limiting the account to local console logon only.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\ Value Name: LimitBlankPasswordUse Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Accounts: Limit local account use of blank passwords to console logon only" to "Enabled".
References:	CCI-000366

STIG ID: WN16-SO-000030

Group ID: V-73623

Rule ID: SV-88287r2_rule

Severity: CAT II

Requirement:	Windows Server 2016 built-in administrator account must be renamed.
Discussion:	The built-in administrator account is a well-known account subject to attack. Renaming this account to an unidentified name improves the protection of this account and the system.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options. If the value for "Accounts: Rename administrator account" is not set to a value other than "Administrator", this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "NewAdministratorName" is not something other than "Administrator" in the file, this is a finding.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Accounts: Rename administrator account" to a name other than "Administrator".
References:	CCI-000366

STIG ID: WN16-SO-000040

Group ID: V-73625

Rule ID: SV-88289r2_rule

Severity: CAT II

Requirement:	Windows Server 2016 built-in guest account must be renamed.
Discussion:	The built-in guest account is a well-known user account on all Windows systems and, as initially installed, does not require a password. This can allow access to system resources by unauthorized users. Renaming this account to an unidentified name improves the protection of this account and the system.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options. If the value for "Accounts: Rename guest account" is not set to a value other than "Guest", this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "NewGuestName" is not something other than "Guest" in the file, this is a finding.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Accounts: Rename guest account" to a name other than "Guest".
References:	CCI-000366

STIG ID: WN16-SO-000050

Group ID: V-73627

Rule ID: SV-88291r1_rule

Severity: CAT II

Requirement:	Audit policy using subcategories must be enabled.
Discussion:	Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. This setting allows administrators to enable more precise auditing capabilities.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\ Value Name: SCENoApplyLegacyAuditPolicy Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Audit: Force audit policy subcategory settings (Windows Vista or later) to override audit policy category settings" to "Enabled".
References:	CCI-000169

STIG ID: WN16-SO-000080

Group ID: V-73633

Rule ID: SV-88297r1_rule

Severity: CAT II

Requirement:	The setting Domain member: Digitally encrypt or sign secure channel data (always) must be configured to Enabled.
Discussion:	Requests sent on the secure channel are authenticated, and sensitive information (such as passwords) is encrypted, but not all information is encrypted. If this policy is enabled, outgoing secure channel traffic will be encrypted and signed. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: RequireSignOrSeal Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Domain member: Digitally encrypt or sign secure channel data (always)" to "Enabled".
References:	CCI-002418 CCI-002421

STIG ID: WN16-SO-000090

Group ID: V-73635

Rule ID: SV-88299r1_rule

Severity: CAT II

Requirement:	The setting Domain member: Digitally encrypt secure channel data (when possible) must be configured to enabled.
Discussion:	Requests sent on the secure channel are authenticated, and sensitive information (such as passwords) is encrypted, but not all information is encrypted. If this policy is enabled, outgoing secure channel traffic will be encrypted. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: SealSecureChannel Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Domain member: Digitally encrypt secure channel data (when possible)" to "Enabled".
References:	CCI-002418 CCI-002421

STIG ID: WN16-SO-000100

Group ID: V-73637

Rule ID: SV-88301r1_rule

Severity: CAT II

Requirement:	The setting Domain member: Digitally sign secure channel data (when possible) must be configured to Enabled.
Discussion:	Requests sent on the secure channel are authenticated, and sensitive information (such as passwords) is encrypted, but the channel is not integrity checked. If this policy is enabled, outgoing secure channel traffic will be signed. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: SignSecureChannel Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Domain member: Digitally sign secure channel data (when possible)" to "Enabled".
References:	CCI-002418 CCI-002421

STIG ID: WN16-SO-000110

Group ID: V-73639

Rule ID: SV-88303r1_rule

Severity: CAT II

Requirement:	The computer account password must not be prevented from being reset.
Discussion:	Computer account passwords are changed automatically on a regular basis. Disabling automatic password changes can make the system more vulnerable to malicious access. Frequent password changes can be a significant safeguard for the system. A new password for the computer account will be generated every 30 days.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: DisablePasswordChange Value Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Domain member: Disable machine account password changes" to "Disabled".
References:	CCI-001967

STIG ID: WN16-SO-000120

Group ID: V-73641

Rule ID: SV-88305r1_rule

Severity: CAT II

Requirement:	The maximum age for machine account passwords must be configured to 30 days or less.
Discussion:	Computer account passwords are changed automatically on a regular basis. This setting controls the maximum password age that a machine account may have. This must be set to no more than 30 days, ensuring the machine changes its password monthly.
Check:	This is the default configuration for this setting (30 days). If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: MaximumPasswordAge Value Type: REG_DWORD Value: 0x0000001e (30) (or less, but not 0)
Fix:	This is the default configuration for this setting (30 days). Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Domain member: Maximum machine account password age" to "30" or less (excluding "0", which is unacceptable).
References:	CCI-000366

STIG ID: WN16-SO-000130

Group ID: V-73643

Rule ID: SV-88307r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to require a strong session key.
Discussion:	A computer connecting to a domain controller will establish a secure channel. The secure channel connection may be subject to compromise, such as hijacking or eavesdropping, if strong session keys are not used to establish the connection. Requiring strong session keys enforces 128-bit encryption between systems. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: RequireStrongKey Value Type: REG_DWORD Value: 0x00000001 (1) This setting may prevent a system from being joined to a domain if not configured consistently between systems.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Domain member: Require strong (Windows 2000 or Later) session key" to "Enabled".
References:	CCI-002418 CCI-002421

STIG ID: WN16-SO-000140

Group ID: V-73645

Rule ID: SV-88309r2_rule

Severity: CAT II

Requirement:	The machine inactivity limit must be set to 15 minutes, locking the system with the screen saver.
Discussion:	Unattended systems are susceptible to unauthorized use and should be locked when unattended. The screen saver should be set at a maximum of 15 minutes and be password protected. This protects critical and sensitive data from exposure to unauthorized personnel with physical access to the computer.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: InactivityTimeoutSecs Value Type: REG_DWORD Value: 0x00000384 (900) (or less, excluding "0" which is effectively disabled)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Interactive logon: Machine inactivity limit" to "900" seconds or less, excluding "0" which is effectively disabled.
References:	CCI-000057

STIG ID: WN16-SO-000150

Group ID: V-73647

Rule ID: SV-88311r2_rule

Severity: CAT II

Requirement:	The required legal notice must be configured to display before console logon.
Discussion:	Failure to display the logon banner prior to a logon attempt will negate legal proceedings resulting from unauthorized access to system resources. Satisfies: SRG-OS-000023-GPOS-00006, SRG-OS-000024-GPOS-00007, SRG-OS-000228-GPOS-00088
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: LegalNoticeText Value Type: REG_SZ Value: See message text below You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Interactive Logon: Message text for users attempting to log on" to the following: You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.
References:	CCI-000048 CCI-000050 CCI-001384 CCI-001385 CCI-001386 CCI-001387 CCI-001388

STIG ID: WN16-SO-000160

Group ID: V-73649

Rule ID: SV-88313r1_rule

Severity: CAT III

Requirement:	The Windows dialog box title for the legal banner must be configured with the appropriate text.
Discussion:	Failure to display the logon banner prior to a logon attempt will negate legal proceedings resulting from unauthorized access to system resources. Satisfies: SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00088
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: LegalNoticeCaption Value Type: REG_SZ Value: See message title options below "DoD Notice and Consent Banner", "US Department of Defense Warning Statement", or an organization-defined equivalent. If an organization-defined title is used, it can in no case contravene or modify the language of the banner text required in WN16-SO-000150. Automated tools may only search for the titles defined above. If an organization-defined title is used, a manual review will be required.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Interactive Logon: Message title for users attempting to log on" to "DoD Notice and Consent Banner", "US Department of Defense Warning Statement", or an organization-defined equivalent. If an organization-defined title is used, it can in no case contravene or modify the language of the message text required in WN16-SO-000150.
References:	CCI-000048 CCI-001384 CCI-001385 CCI-001386 CCI-001387 CCI-001388

STIG ID: WN16-SO-000180

Group ID: V-73807

Rule ID: SV-88473r1_rule

Severity: CAT II

Requirement:	The Smart Card removal option must be configured to Force Logoff or Lock Workstation.
Discussion:	Unattended systems are susceptible to unauthorized use and must be locked. Configuring a system to lock when a smart card is removed will ensure the system is inaccessible when unattended.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\ Value Name: scremoveoption Value Type: REG_SZ Value: 1 (Lock Workstation) or 2 (Force Logoff) If configuring this on servers causes issues, such as terminating users' remote sessions, and the organization has a policy in place that any other sessions on the servers, such as administrative console logons, are manually locked or logged off when unattended or not in use, this would be acceptable. This must be documented with the ISSO.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Interactive logon: Smart card removal behavior" to "Lock Workstation" or "Force Logoff".
References:	CCI-000366

STIG ID: WN16-SO-000190

Group ID: V-73653

Rule ID: SV-88317r1_rule

Severity: CAT II

Requirement:	The setting Microsoft network client: Digitally sign communications (always) must be configured to Enabled.
Discussion:	The server message block (SMB) protocol provides the basis for many network operations. Digitally signed SMB packets aid in preventing man-in-the-middle attacks. If this policy is enabled, the SMB client will only communicate with an SMB server that performs SMB packet signing. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters\ Value Name: RequireSecuritySignature Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Microsoft network client: Digitally sign communications (always)" to "Enabled".
References:	CCI-002418 CCI-002421

STIG ID: WN16-SO-000200

Group ID: V-73655

Rule ID: SV-88319r1_rule

Severity: CAT II

Requirement:	The setting Microsoft network client: Digitally sign communications (if server agrees) must be configured to Enabled.
Discussion:	The server message block (SMB) protocol provides the basis for many network operations. If this policy is enabled, the SMB client will request packet signing when communicating with an SMB server that is enabled or required to perform SMB packet signing. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters\ Value Name: EnableSecuritySignature Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Microsoft network client: Digitally sign communications (if server agrees)" to "Enabled".
References:	CCI-002418 CCI-002421

STIG ID: WN16-SO-000210

Group ID: V-73657

Rule ID: SV-88321r1_rule

Severity: CAT II

Requirement:	Unencrypted passwords must not be sent to third-party Server Message Block (SMB) servers.
Discussion:	Some non-Microsoft SMB servers only support unencrypted (plain-text) password authentication. Sending plain-text passwords across the network when authenticating to an SMB server reduces the overall security of the environment. Check with the vendor of the SMB server to determine if there is a way to support encrypted password authentication.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters\ Value Name: EnablePlainTextPassword Value Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Microsoft Network Client: Send unencrypted password to third-party SMB servers" to "Disabled".
References:	CCI-000197

STIG ID: WN16-SO-000230

Group ID: V-73661

Rule ID: SV-88325r1_rule

Severity: CAT II

Requirement:	The setting Microsoft network server: Digitally sign communications (always) must be configured to Enabled.
Discussion:	The server message block (SMB) protocol provides the basis for many network operations. Digitally signed SMB packets aid in preventing man-in-the-middle attacks. If this policy is enabled, the SMB server will only communicate with an SMB client that performs SMB packet signing. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\LanManServer\Parameters\ Value Name: RequireSecuritySignature Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Microsoft network server: Digitally sign communications (always)" to "Enabled".
References:	CCI-002418 CCI-002421

STIG ID: WN16-SO-000240

Group ID: V-73663

Rule ID: SV-88327r1_rule

Severity: CAT II

Requirement:	The setting Microsoft network server: Digitally sign communications (if client agrees) must be configured to Enabled.
Discussion:	The server message block (SMB) protocol provides the basis for many network operations. Digitally signed SMB packets aid in preventing man-in-the-middle attacks. If this policy is enabled, the SMB server will negotiate SMB packet signing as requested by the client. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\LanManServer\Parameters\ Value Name: EnableSecuritySignature Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Microsoft network server: Digitally sign communications (if client agrees)" to "Enabled".
References:	CCI-002418 CCI-002421

STIG ID: WN16-SO-000250

Group ID: V-73665

Rule ID: SV-88329r2_rule

Severity: CAT I

Requirement:	Anonymous SID/Name translation must not be allowed.
Discussion:	Allowing anonymous SID/Name translation can provide sensitive information for accessing a system. Only authorized users must be able to perform such translations.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options. If the value for "Network access: Allow anonymous SID/Name translation" is not set to "Disabled", this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "LSAAnonymousNameLookup" equals "1" in the file, this is a finding.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Network access: Allow anonymous SID/Name translation" to "Disabled".
References:	CCI-000366

STIG ID: WN16-SO-000260

Group ID: V-73667

Rule ID: SV-88331r1_rule

Severity: CAT I

Requirement:	Anonymous enumeration of Security Account Manager (SAM) accounts must not be allowed.
Discussion:	Anonymous enumeration of SAM accounts allows anonymous logon users (null session connections) to list all accounts names, thus providing a list of potential points to attack the system.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\ Value Name: RestrictAnonymousSAM Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Network access: Do not allow anonymous enumeration of SAM accounts" to "Enabled".
References:	CCI-000366

STIG ID: WN16-SO-000270

Group ID: V-73669

Rule ID: SV-88333r1_rule

Severity: CAT I

Requirement:	Anonymous enumeration of shares must not be allowed.
Discussion:	Allowing anonymous logon users (null session connections) to list all account names and enumerate all shared resources can provide a map of potential points to attack the system.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\ Value Name: RestrictAnonymous Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Network access: Do not allow anonymous enumeration of SAM accounts and shares" to "Enabled".
References:	CCI-001090

STIG ID: WN16-SO-000290

Group ID: V-73673

Rule ID: SV-88337r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to prevent anonymous users from having the same permissions as the Everyone group.
Discussion:	Access by anonymous users must be restricted. If this setting is enabled, anonymous users have the same rights and permissions as the built-in Everyone group. Anonymous users must not have these permissions or rights.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\ Value Name: EveryoneIncludesAnonymous Value Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Network access: Let everyone permissions apply to anonymous users" to "Disabled".
References:	CCI-000366

STIG ID: WN16-SO-000300

Group ID: V-73675

Rule ID: SV-88339r1_rule

Severity: CAT I

Requirement:	Anonymous access to Named Pipes and Shares must be restricted.
Discussion:	Allowing anonymous access to named pipes or shares provides the potential for unauthorized system access. This setting restricts access to those defined in "Network access: Named Pipes that can be accessed anonymously" and "Network access: Shares that can be accessed anonymously", both of which must be blank under other requirements.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\LanManServer\Parameters\ Value Name: RestrictNullSessAccess Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Network access: Restrict anonymous access to Named Pipes and Shares" to "Enabled".
References:	CCI-001090

STIG ID: WN16-SO-000320

Group ID: V-73679

Rule ID: SV-88343r1_rule

Severity: CAT II

Requirement:	Services using Local System that use Negotiate when reverting to NTLM authentication must use the computer identity instead of authenticating anonymously.
Discussion:	Services using Local System that use Negotiate when reverting to NTLM authentication may gain unauthorized access if allowed to authenticate anonymously versus using the computer identity.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\LSA\ Value Name: UseMachineId Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Network security: Allow Local System to use computer identity for NTLM" to "Enabled".
References:	CCI-000366

STIG ID: WN16-SO-000330

Group ID: V-73681

Rule ID: SV-88345r1_rule

Severity: CAT II

Requirement:	NTLM must be prevented from falling back to a Null session.
Discussion:	NTLM sessions that are allowed to fall back to Null (unauthenticated) sessions may gain unauthorized access.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\LSA\MSV1_0\ Value Name: allownullsessionfallback Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Network security: Allow LocalSystem NULL session fallback" to "Disabled".
References:	CCI-000366

STIG ID: WN16-SO-000340

Group ID: V-73683

Rule ID: SV-88347r1_rule

Severity: CAT II

Requirement:	PKU2U authentication using online identities must be prevented.
Discussion:	PKU2U is a peer-to-peer authentication protocol. This setting prevents online identities from authenticating to domain-joined systems. Authentication will be centrally managed with Windows user accounts.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\LSA\pku2u\ Value Name: AllowOnlineID Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Network security: Allow PKU2U authentication requests to this computer to use online identities" to "Disabled".
References:	CCI-000366

STIG ID: WN16-SO-000350

Group ID: V-73685

Rule ID: SV-88349r2_rule

Severity: CAT II

Requirement:	Kerberos encryption types must be configured to prevent the use of DES and RC4 encryption suites.
Discussion:	Certain encryption types are no longer considered secure. The DES and RC4 encryption suites must not be used for Kerberos encryption. Note: Organizations with domain controllers running earlier versions of Windows where RC4 encryption is enabled, selecting "The other domain supports Kerberos AES Encryption" on domain trusts, may be required to allow client communication across the trust relationship.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\Kerberos\Parameters\ Value Name: SupportedEncryptionTypes Value Type: REG_DWORD Value: 0x7ffffff8 (2147483640)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Network security: Configure encryption types allowed for Kerberos" to "Enabled" with only the following selected: AES128_HMAC_SHA1 AES256_HMAC_SHA1 Future encryption types Note: Organizations with domain controllers running earlier versions of Windows where RC4 encryption is enabled, selecting "The other domain supports Kerberos AES Encryption" on domain trusts, may be required to allow client communication across the trust relationship.
References:	CCI-000803

STIG ID: WN16-SO-000360

Group ID: V-73687

Rule ID: SV-88351r1_rule

Severity: CAT I

Requirement:	Windows Server 2016 must be configured to prevent the storage of the LAN Manager hash of passwords.
Discussion:	The LAN Manager hash uses a weak encryption algorithm and there are several tools available that use this hash to retrieve account passwords. This setting controls whether a LAN Manager hash of the password is stored in the SAM the next time the password is changed.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\ Value Name: NoLMHash Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Network security: Do not store LAN Manager hash value on next password change" to "Enabled".
References:	CCI-000196

STIG ID: WN16-SO-000380

Group ID: V-73691

Rule ID: SV-88355r1_rule

Severity: CAT I

Requirement:	The LAN Manager authentication level must be set to send NTLMv2 response only and to refuse LM and NTLM.
Discussion:	The Kerberos v5 authentication protocol is the default for authentication of users who are logging on to domain accounts. NTLM, which is less secure, is retained in later Windows versions for compatibility with clients and servers that are running earlier versions of Windows or applications that still use it. It is also used to authenticate logons to standalone computers that are running later versions.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\ Value Name: LmCompatibilityLevel Value Type: REG_DWORD Value: 0x00000005 (5)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Network security: LAN Manager authentication level" to "Send NTLMv2 response only. Refuse LM & NTLM".
References:	CCI-000366

STIG ID: WN16-SO-000390

Group ID: V-73693

Rule ID: SV-88357r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to at least negotiate signing for LDAP client signing.
Discussion:	This setting controls the signing requirements for LDAP clients. This must be set to "Negotiate signing" or "Require signing", depending on the environment and type of LDAP server in use.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\LDAP\ Value Name: LDAPClientIntegrity Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Network security: LDAP client signing requirements" to "Negotiate signing" at a minimum.
References:	CCI-000366

STIG ID: WN16-SO-000400

Group ID: V-73695

Rule ID: SV-88359r1_rule

Severity: CAT II

Requirement:	Session security for NTLM SSP-based clients must be configured to require NTLMv2 session security and 128-bit encryption.
Discussion:	Microsoft has implemented a variety of security support providers for use with Remote Procedure Call (RPC) sessions. All of the options must be enabled to ensure the maximum security level.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0\ Value Name: NTLMMinClientSec Value Type: REG_DWORD Value: 0x20080000 (537395200)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Network security: Minimum session security for NTLM SSP based (including secure RPC) clients" to "Require NTLMv2 session security" and "Require 128-bit encryption" (all options selected).
References:	CCI-000366

STIG ID: WN16-SO-000410

Group ID: V-73697

Rule ID: SV-88361r1_rule

Severity: CAT II

Requirement:	Session security for NTLM SSP-based servers must be configured to require NTLMv2 session security and 128-bit encryption.
Discussion:	Microsoft has implemented a variety of security support providers for use with Remote Procedure Call (RPC) sessions. All of the options must be enabled to ensure the maximum security level.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0\ Value Name: NTLMMinServerSec Value Type: REG_DWORD Value: 0x20080000 (537395200)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "Network security: Minimum session security for NTLM SSP based (including secure RPC) servers" to "Require NTLMv2 session security" and "Require 128-bit encryption" (all options selected).
References:	CCI-000366

STIG ID: WN16-SO-000420

Group ID: V-73699

Rule ID: SV-88363r1_rule

Severity: CAT II

Requirement:	Users must be required to enter a password to access private keys stored on the computer.
Discussion:	If the private key is discovered, an attacker can use the key to authenticate as an authorized user and gain access to the network infrastructure. The cornerstone of the PKI is the private key used to encrypt or digitally sign information. If the private key is stolen, this will lead to the compromise of the authentication and non-repudiation gained through PKI because the attacker can use the private key to digitally sign documents and pretend to be the authorized user. Both the holders of a digital certificate and the issuing authority must protect the computers, storage devices, or whatever they use to keep the private keys.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Cryptography\ Value Name: ForceKeyProtection Type: REG_DWORD Value: 0x00000002 (2)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "System cryptography: Force strong key protection for user keys stored on the computer" to "User must enter a password each time they use a key".
References:	CCI-000186

STIG ID: WN16-SO-000430

Group ID: V-73701

Rule ID: SV-88365r1_rule

Severity: CAT II

Requirement:	Windows Server 2016 must be configured to use FIPS-compliant algorithms for encryption, hashing, and signing.
Discussion:	This setting ensures the system uses algorithms that are FIPS-compliant for encryption, hashing, and signing. FIPS-compliant algorithms meet specific standards established by the U.S. Government and must be the algorithms used for all OS encryption functions. Satisfies: SRG-OS-000033-GPOS-00014, SRG-OS-000478-GPOS-00223
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\FIPSAlgorithmPolicy\ Value Name: Enabled Value Type: REG_DWORD Value: 0x00000001 (1) Clients with this setting enabled will not be able to communicate via digitally encrypted or signed protocols with servers that do not support these algorithms. Both the browser and web server must be configured to use TLS; otherwise. the browser will not be able to connect to a secure site.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing" to "Enabled".
References:	CCI-000068 CCI-002450

STIG ID: WN16-SO-000450

Group ID: V-73705

Rule ID: SV-88369r1_rule

Severity: CAT III

Requirement:	The default permissions of global system objects must be strengthened.
Discussion:	Windows systems maintain a global list of shared system resources such as DOS device names, mutexes, and semaphores. Each type of object is created with a default Discretionary Access Control List (DACL) that specifies who can access the objects with what permissions. When this policy is enabled, the default DACL is stronger, allowing non-administrative users to read shared objects but not to modify shared objects they did not create.
Check:	If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Session Manager\ Value Name: ProtectionMode Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "System objects: Strengthen default permissions of internal system objects (e.g., Symbolic Links)" to "Enabled".
References:	CCI-000366

STIG ID: WN16-SO-000460

Group ID: V-73707

Rule ID: SV-88371r1_rule

Severity: CAT II

Requirement:	User Account Control approval mode for the built-in Administrator must be enabled.
Discussion:	User Account Control (UAC) is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting configures the built-in Administrator account so that it runs in Admin Approval Mode. Satisfies: SRG-OS-000373-GPOS-00157, SRG-OS-000373-GPOS-00156
Check:	UAC requirements are NA for Server Core installations (this is the default installation option for Windows Server 2016 versus Server with Desktop Experience) as well as Nano Server. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: FilterAdministratorToken Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "User Account Control: Admin Approval Mode for the Built-in Administrator account" to "Enabled".
References:	CCI-002038

STIG ID: WN16-SO-000470

Group ID: V-73709

Rule ID: SV-88373r1_rule

Severity: CAT II

Requirement:	UIAccess applications must not be allowed to prompt for elevation without using the secure desktop.
Discussion:	User Account Control (UAC) is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting prevents User Interface Accessibility programs from disabling the secure desktop for elevation prompts.
Check:	UAC requirements are NA for Server Core installations (this is the default installation option for Windows Server 2016 versus Server with Desktop Experience) as well as Nano Server. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: EnableUIADesktopToggle Value Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "User Account Control: Allow UIAccess applications to prompt for elevation without using the secure desktop" to "Disabled".
References:	CCI-001084

STIG ID: WN16-SO-000480

Group ID: V-73711

Rule ID: SV-88375r1_rule

Severity: CAT II

Requirement:	User Account Control must, at a minimum, prompt administrators for consent on the secure desktop.
Discussion:	User Account Control (UAC) is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting configures the elevation requirements for logged-on administrators to complete a task that requires raised privileges.
Check:	UAC requirements are NA for Server Core installations (this is default installation option for Windows Server 2016 versus Server with Desktop Experience) as well as Nano Server. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: ConsentPromptBehaviorAdmin Value Type: REG_DWORD Value: 0x00000002 (2) (Prompt for consent on the secure desktop) 0x00000001 (1) (Prompt for credentials on the secure desktop)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode" to "Prompt for consent on the secure desktop". The more secure option for this setting, "Prompt for credentials on the secure desktop", would also be acceptable.
References:	CCI-001084

STIG ID: WN16-SO-000490

Group ID: V-73713

Rule ID: SV-88377r1_rule

Severity: CAT II

Requirement:	User Account Control must automatically deny standard user requests for elevation.
Discussion:	User Account Control (UAC) is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting controls the behavior of elevation when requested by a standard user account. Satisfies: SRG-OS-000373-GPOS-00157, SRG-OS-000373-GPOS-00156
Check:	UAC requirements are NA for Server Core installations (this is the default installation option for Windows Server 2016 versus Server with Desktop Experience) as well as Nano Server. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: ConsentPromptBehaviorUser Value Type: REG_DWORD Value: 0x00000000 (0)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "User Account Control: Behavior of the elevation prompt for standard users" to "Automatically deny elevation requests".
References:	CCI-002038

STIG ID: WN16-SO-000500

Group ID: V-73715

Rule ID: SV-88379r1_rule

Severity: CAT II

Requirement:	User Account Control must be configured to detect application installations and prompt for elevation.
Discussion:	User Account Control (UAC) is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting requires Windows to respond to application installation requests by prompting for credentials.
Check:	UAC requirements are NA for Server Core installations (this is the default installation option for Windows Server 2016 versus Server with Desktop Experience) as well as Nano Server. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: EnableInstallerDetection Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "User Account Control: Detect application installations and prompt for elevation" to "Enabled".
References:	CCI-001084

STIG ID: WN16-SO-000510

Group ID: V-73717

Rule ID: SV-88381r1_rule

Severity: CAT II

Requirement:	User Account Control must only elevate UIAccess applications that are installed in secure locations.
Discussion:	User Account Control (UAC) is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting configures Windows to only allow applications installed in a secure location on the file system, such as the Program Files or the Windows\System32 folders, to run with elevated privileges.
Check:	UAC requirements are NA for Server Core installations (this is the default installation option for Windows Server 2016 versus Server with Desktop Experience) as well as Nano Server. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: EnableSecureUIAPaths Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "User Account Control: Only elevate UIAccess applications that are installed in secure locations" to "Enabled".
References:	CCI-001084

STIG ID: WN16-SO-000520

Group ID: V-73719

Rule ID: SV-88383r1_rule

Severity: CAT II

Requirement:	User Account Control must run all administrators in Admin Approval Mode, enabling UAC.
Discussion:	User Account Control (UAC) is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting enables UAC. Satisfies: SRG-OS-000373-GPOS-00157, SRG-OS-000373-GPOS-00156
Check:	UAC requirements are NA for Server Core installations (this is the default installation option for Windows Server 2016 versus Server with Desktop Experience) as well as Nano Server. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: EnableLUA Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "User Account Control: Run all administrators in Admin Approval Mode" to "Enabled".
References:	CCI-002038

STIG ID: WN16-SO-000530

Group ID: V-73721

Rule ID: SV-88385r1_rule

Severity: CAT II

Requirement:	User Account Control must virtualize file and registry write failures to per-user locations.
Discussion:	User Account Control (UAC) is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting configures non-UAC-compliant applications to run in virtualized file and registry entries in per-user locations, allowing them to run.
Check:	UAC requirements are NA for Server Core installations (this is the default installation option for Windows Server 2016 versus Server with Desktop Experience) as well as Nano Server. If the following registry value does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: EnableVirtualization Value Type: REG_DWORD Value: 0x00000001 (1)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> "User Account Control: Virtualize file and registry write failures to per-user locations" to "Enabled".
References:	CCI-001084

STIG ID: WN16-UC-000030

Group ID: V-73727

Rule ID: SV-88391r1_rule

Severity: CAT II

Requirement:	Zone information must be preserved when saving attachments.
Discussion:	Attachments from outside sources may contain malicious code. Preserving zone of origin (Internet, intranet, local, restricted) information on file attachments allows Windows to determine risk.
Check:	The default behavior is for Windows to mark file attachments with their zone information. If the registry Value Name below does not exist, this is not a finding. If it exists and is configured with a value of "2", this is not a finding. If it exists and is configured with a value of "1", this is a finding. Registry Hive: HKEY_CURRENT_USER Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Attachments\ Value Name: SaveZoneInformation Value Type: REG_DWORD Value: 0x00000002 (2) (or if the Value Name does not exist)
Fix:	The default behavior is for Windows to mark file attachments with their zone information. If this needs to be corrected, configure the policy value for User Configuration >> Administrative Templates >> Windows Components >> Attachment Manager >> "Do not preserve zone information in file attachments" to "Not Configured" or "Disabled".
References:	CCI-000366

STIG ID: WN16-UR-000010

Group ID: V-73729

Rule ID: SV-88393r2_rule

Severity: CAT II

Requirement:	The Access Credential Manager as a trusted caller user right must not be assigned to any groups or accounts.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Access Credential Manager as a trusted caller" user right may be able to retrieve the credentials of other accounts from Credential Manager.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups are granted the "Access Credential Manager as a trusted caller" user right, this is a finding. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs are granted the "SeTrustedCredManAccessPrivilege" user right, this is a finding.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Access Credential Manager as a trusted caller" to be defined but containing no entries (blank).
References:	CCI-002235

STIG ID: WN16-UR-000030

Group ID: V-73735

Rule ID: SV-88399r2_rule

Severity: CAT I

Requirement:	The Act as part of the operating system user right must not be assigned to any groups or accounts.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Act as part of the operating system" user right can assume the identity of any user and gain access to resources that the user is authorized to access. Any accounts with this right can take complete control of a system.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups (to include administrators), are granted the "Act as part of the operating system" user right, this is a finding. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs are granted the "SeTcbPrivilege" user right, this is a finding. If an application requires this user right, this would not be a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the ISSO. The application account must meet requirements for application account passwords, such as length (WN16-00-000060) and required frequency of changes (WN16-00-000070). Passwords for accounts with this user right must be protected as highly privileged accounts.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Act as part of the operating system" to be defined but containing no entries (blank).
References:	CCI-002235

STIG ID: WN16-UR-000050

Group ID: V-73739

Rule ID: SV-88403r2_rule

Severity: CAT II

Requirement:	The Allow log on locally user right must only be assigned to the Administrators group.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Allow log on locally" user right can log on interactively to a system.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Allow log on locally" user right, this is a finding. - Administrators For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeInteractiveLogonRight" user right, this is a finding. S-1-5-32-544 (Administrators) If an application requires this user right, this would not be a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the ISSO. The application account must meet requirements for application account passwords, such as length (WN16-00-000060) and required frequency of changes (WN16-00-000070).
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Allow log on locally" to include only the following accounts or groups: - Administrators
References:	CCI-000213

STIG ID: WN16-UR-000070

Group ID: V-73743

Rule ID: SV-88407r2_rule

Severity: CAT II

Requirement:	The Back up files and directories user right must only be assigned to the Administrators group.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Back up files and directories" user right can circumvent file and directory permissions and could allow access to sensitive data.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Back up files and directories" user right, this is a finding. - Administrators For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeBackupPrivilege" user right, this is a finding. S-1-5-32-544 (Administrators) If an application requires this user right, this would not be a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the ISSO. The application account must meet requirements for application account passwords, such as length (WN16-00-000060) and required frequency of changes (WN16-00-000070).
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Back up files and directories" to include only the following accounts or groups: - Administrators
References:	CCI-002235

STIG ID: WN16-UR-000080

Group ID: V-73745

Rule ID: SV-88409r2_rule

Severity: CAT II

Requirement:	The Create a pagefile user right must only be assigned to the Administrators group.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Create a pagefile" user right can change the size of a pagefile, which could affect system performance.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Create a pagefile" user right, this is a finding. - Administrators For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeCreatePagefilePrivilege" user right, this is a finding. S-1-5-32-544 (Administrators)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Create a pagefile" to include only the following accounts or groups: - Administrators
References:	CCI-002235

STIG ID: WN16-UR-000090

Group ID: V-73747

Rule ID: SV-88411r2_rule

Severity: CAT I

Requirement:	The Create a token object user right must not be assigned to any groups or accounts.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Create a token object" user right allows a process to create an access token. This could be used to provide elevated rights and compromise a system.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups are granted the "Create a token object" user right, this is a finding. If an application requires this user right, this would not be a finding. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs are granted the "SeCreateTokenPrivilege" user right, this is a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the ISSO. The application account must meet requirements for application account passwords, such as length (WN16-00-000060) and required frequency of changes (WN16-00-000070). Passwords for application accounts with this user right must be protected as highly privileged accounts.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Create a token object" to be defined but containing no entries (blank).
References:	CCI-002235

STIG ID: WN16-UR-000100

Group ID: V-73749

Rule ID: SV-88413r2_rule

Severity: CAT II

Requirement:	The Create global objects user right must only be assigned to Administrators, Service, Local Service, and Network Service.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Create global objects" user right can create objects that are available to all sessions, which could affect processes in other users' sessions.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Create global objects" user right, this is a finding. - Administrators - Service - Local Service - Network Service For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeCreateGlobalPrivilege" user right, this is a finding. S-1-5-32-544 (Administrators) S-1-5-6 (Service) S-1-5-19 (Local Service) S-1-5-20 (Network Service) If an application requires this user right, this would not be a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the ISSO. The application account must meet requirements for application account passwords, such as length (WN16-00-000060) and required frequency of changes (WN16-00-000070).
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Create global objects" to include only the following accounts or groups: - Administrators - Service - Local Service - Network Service
References:	CCI-002235

STIG ID: WN16-UR-000110

Group ID: V-73751

Rule ID: SV-88415r2_rule

Severity: CAT II

Requirement:	The Create permanent shared objects user right must not be assigned to any groups or accounts.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Create permanent shared objects" user right could expose sensitive data by creating shared objects.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups are granted the "Create permanent shared objects" user right, this is a finding. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs are granted the "SeCreatePermanentPrivilege" user right, this is a finding.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Create permanent shared objects" to be defined but containing no entries (blank).
References:	CCI-002235

STIG ID: WN16-UR-000120

Group ID: V-73753

Rule ID: SV-88417r2_rule

Severity: CAT II

Requirement:	The Create symbolic links user right must only be assigned to the Administrators group.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Create symbolic links" user right can create pointers to other objects, which could expose the system to attack.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Create symbolic links" user right, this is a finding. - Administrators For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeCreateSymbolicLinkPrivilege" user right, this is a finding. S-1-5-32-544 (Administrators) Systems that have the Hyper-V role will also have "Virtual Machines" given this user right (this may be displayed as "NT Virtual Machine\Virtual Machines", SID S-1-5-83-0). This is not a finding.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Create symbolic links" to include only the following accounts or groups: - Administrators Systems that have the Hyper-V role will also have "Virtual Machines" given this user right. If this needs to be added manually, enter it as "NT Virtual Machine\Virtual Machines".
References:	CCI-002235

STIG ID: WN16-UR-000130

Group ID: V-73755

Rule ID: SV-88419r2_rule

Severity: CAT I

Requirement:	The Debug programs user right must only be assigned to the Administrators group.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Debug programs" user right can attach a debugger to any process or to the kernel, providing complete access to sensitive and critical operating system components. This right is given to Administrators in the default configuration.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Debug programs" user right, this is a finding. - Administrators For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeDebugPrivilege" user right, this is a finding. S-1-5-32-544 (Administrators) If an application requires this user right, this would not be a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the ISSO. The application account must meet requirements for application account passwords, such as length (WN16-00-000060) and required frequency of changes (WN16-00-000070). Passwords for application accounts with this user right must be protected as highly privileged accounts.
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Debug programs" to include only the following accounts or groups: - Administrators
References:	CCI-002235

STIG ID: WN16-UR-000200

Group ID: V-73781

Rule ID: SV-88445r2_rule

Severity: CAT II

Requirement:	The Force shutdown from a remote system user right must only be assigned to the Administrators group.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Force shutdown from a remote system" user right can remotely shut down a system, which could result in a denial of service.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Force shutdown from a remote system" user right, this is a finding. - Administrators For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeRemoteShutdownPrivilege" user right, this is a finding. S-1-5-32-544 (Administrators)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Force shutdown from a remote system" to include only the following accounts or groups: - Administrators
References:	CCI-002235

STIG ID: WN16-UR-000210

Group ID: V-73783

Rule ID: SV-88447r2_rule

Severity: CAT II

Requirement:	The Generate security audits user right must only be assigned to Local Service and Network Service.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Generate security audits" user right specifies users and processes that can generate Security Log audit records, which must only be the system service accounts defined.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Generate security audits" user right, this is a finding. - Local Service - Network Service For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeAuditPrivilege" user right, this is a finding. S-1-5-19 (Local Service) S-1-5-20 (Network Service) If an application requires this user right, this would not be a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the ISSO. The application account must meet requirements for application account passwords, such as length (WN16-00-000060) and required frequency of changes (WN16-00-000070).
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Generate security audits" to include only the following accounts or groups: - Local Service - Network Service
References:	CCI-002235

STIG ID: WN16-UR-000220

Group ID: V-73785

Rule ID: SV-88449r2_rule

Severity: CAT II

Requirement:	The Impersonate a client after authentication user right must only be assigned to Administrators, Service, Local Service, and Network Service.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Impersonate a client after authentication" user right allows a program to impersonate another user or account to run on their behalf. An attacker could use this to elevate privileges.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Impersonate a client after authentication" user right, this is a finding. - Administrators - Service - Local Service - Network Service For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeImpersonatePrivilege" user right, this is a finding. S-1-5-32-544 (Administrators) S-1-5-6 (Service) S-1-5-19 (Local Service) S-1-5-20 (Network Service) If an application requires this user right, this would not be a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the ISSO. The application account must meet requirements for application account passwords, such as length (WN16-00-000060) and required frequency of changes (WN16-00-000070).
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Impersonate a client after authentication" to include only the following accounts or groups: - Administrators - Service - Local Service - Network Service
References:	CCI-002235

STIG ID: WN16-UR-000230

Group ID: V-73787

Rule ID: SV-88451r2_rule

Severity: CAT II

Requirement:	The Increase scheduling priority user right must only be assigned to the Administrators group.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Increase scheduling priority" user right can change a scheduling priority, causing performance issues or a denial of service.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Increase scheduling priority" user right, this is a finding. - Administrators For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeIncreaseBasePriorityPrivilege" user right, this is a finding. S-1-5-32-544 (Administrators) If an application requires this user right, this would not be a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the ISSO. The application account must meet requirements for application account passwords, such as length (WN16-00-000060) and required frequency of changes (WN16-00-000070).
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Increase scheduling priority" to include only the following accounts or groups: - Administrators
References:	CCI-002235

STIG ID: WN16-UR-000240

Group ID: V-73789

Rule ID: SV-88453r2_rule

Severity: CAT II

Requirement:	The Load and unload device drivers user right must only be assigned to the Administrators group.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Load and unload device drivers" user right allows a user to load device drivers dynamically on a system. This could be used by an attacker to install malicious code.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Load and unload device drivers" user right, this is a finding. - Administrators For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeLoadDriverPrivilege" user right, this is a finding. S-1-5-32-544 (Administrators)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Load and unload device drivers" to include only the following accounts or groups: - Administrators
References:	CCI-002235

STIG ID: WN16-UR-000250

Group ID: V-73791

Rule ID: SV-88455r2_rule

Severity: CAT II

Requirement:	The Lock pages in memory user right must not be assigned to any groups or accounts.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. The "Lock pages in memory" user right allows physical memory to be assigned to processes, which could cause performance issues or a denial of service.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups are granted the "Lock pages in memory" user right, this is a finding. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs are granted the "SeLockMemoryPrivilege" user right, this is a finding. If an application requires this user right, this would not be a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the ISSO. The application account must meet requirements for application account passwords, such as length (WN16-00-000060) and required frequency of changes (WN16-00-000070).
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Lock pages in memory" to be defined but containing no entries (blank).
References:	CCI-002235

STIG ID: WN16-UR-000260

Group ID: V-73793

Rule ID: SV-88457r2_rule

Severity: CAT II

Requirement:	The Manage auditing and security log user right must only be assigned to the Administrators group.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Manage auditing and security log" user right can manage the security log and change auditing configurations. This could be used to clear evidence of tampering. Satisfies: SRG-OS-000057-GPOS-00027, SRG-OS-000058-GPOS-00028, SRG-OS-000059-GPOS-00029, SRG-OS-000063-GPOS-00032, SRG-OS-000337-GPOS-00129
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Manage auditing and security log" user right, this is a finding. - Administrators For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeSecurityPrivilege" user right, this is a finding. S-1-5-32-544 (Administrators) If the organization has an Auditors group, the assignment of this group to the user right would not be a finding. If an application requires this user right, this would not be a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the ISSO. The application account must meet requirements for application account passwords, such as length (WN16-00-000060) and required frequency of changes (WN16-00-000070).
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Manage auditing and security log" to include only the following accounts or groups: - Administrators
References:	CCI-000162 CCI-000163 CCI-000164 CCI-000171 CCI-001914

STIG ID: WN16-UR-000270

Group ID: V-73795

Rule ID: SV-88459r2_rule

Severity: CAT II

Requirement:	The Modify firmware environment values user right must only be assigned to the Administrators group.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Modify firmware environment values" user right can change hardware configuration environment variables. This could result in hardware failures or a denial of service.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Modify firmware environment values" user right, this is a finding. - Administrators For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeSystemEnvironmentPrivilege" user right, this is a finding. S-1-5-32-544 (Administrators)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Modify firmware environment values" to include only the following accounts or groups: - Administrators
References:	CCI-002235

STIG ID: WN16-UR-000280

Group ID: V-73797

Rule ID: SV-88461r2_rule

Severity: CAT II

Requirement:	The Perform volume maintenance tasks user right must only be assigned to the Administrators group.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Perform volume maintenance tasks" user right can manage volume and disk configurations. This could be used to delete volumes, resulting in data loss or a denial of service.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Perform volume maintenance tasks" user right, this is a finding. - Administrators For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeManageVolumePrivilege" user right, this is a finding. S-1-5-32-544 (Administrators)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Perform volume maintenance tasks" to include only the following accounts or groups: - Administrators
References:	CCI-002235

STIG ID: WN16-UR-000290

Group ID: V-73799

Rule ID: SV-88463r2_rule

Severity: CAT II

Requirement:	The Profile single process user right must only be assigned to the Administrators group.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Profile single process" user right can monitor non-system processes performance. An attacker could use this to identify processes to attack.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Profile single process" user right, this is a finding. - Administrators For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeProfileSingleProcessPrivilege" user right, this is a finding. S-1-5-32-544 (Administrators)
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Profile single process" to include only the following accounts or groups: - Administrators
References:	CCI-002235

STIG ID: WN16-UR-000300

Group ID: V-73801

Rule ID: SV-88465r2_rule

Severity: CAT II

Requirement:	The Restore files and directories user right must only be assigned to the Administrators group.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Restore files and directories" user right can circumvent file and directory permissions and could allow access to sensitive data. It could also be used to overwrite more current data.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Restore files and directories" user right, this is a finding. - Administrators For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeRestorePrivilege" user right, this is a finding. S-1-5-32-544 (Administrators) If an application requires this user right, this would not be a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the ISSO. The application account must meet requirements for application account passwords, such as length (WN16-00-000060) and required frequency of changes (WN16-00-000070).
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Restore files and directories" to include only the following accounts or groups: - Administrators
References:	CCI-002235

STIG ID: WN16-UR-000310

Group ID: V-73803

Rule ID: SV-88467r2_rule

Severity: CAT II

Requirement:	The Take ownership of files or other objects user right must only be assigned to the Administrators group.
Discussion:	Inappropriate granting of user rights can provide system, administrative, and other high-level capabilities. Accounts with the "Take ownership of files or other objects" user right can take ownership of objects and make changes.
Check:	Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Take ownership of files or other objects" user right, this is a finding. - Administrators For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeTakeOwnershipPrivilege" user right, this is a finding. S-1-5-32-544 (Administrators) If an application requires this user right, this would not be a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the ISSO. The application account must meet requirements for application account passwords, such as length (WN16-00-000060) and required frequency of changes (WN16-00-000070).
Fix:	Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> "Take ownership of files or other objects" to include only the following accounts or groups: - Administrators
References:	CCI-002235